Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹46.7 L+₹88,795 (1.94%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹46.8 L+₹1.0 L (2.21%)Rejected-Finance C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹47.3 L+₹1.5 L (3.29%)Rejected-Finance PANCHAYATI RAJ ROHTAK | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹47.6 L+₹1.8 L (3.89%)Rejected-Finance | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
10 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY CENTRAL JODHPUR
GE ARMY CENTRAL MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO BLDG NO P 691 BDE OFFICE COMPLEX OF HQ ARMED BDE AND OTHER SANCTIONED WORKS IN ARMY AREA UNDER AGE B R II OF GE ARMY CENTRAL JODHPUR
2022_MES_568221_1
GE/J/A OF 2022-23 (9145/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ARMY CENTRAL
₹98,000
Yes
23 Jan 2023
9 Dec 2022
12 Jan 2023
9 Dec 2022
10 Jan 2023
27 Dec 2022
Amount
B/R ITEMS Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any description and in any position not otherwise specifically provided for and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, including finishing the surface even & rough to receive tiling etc., complete all as specified and directed.
M&L Machine cut kota stone slab 20 to 25mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including M&L 20mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for non skid ceramic coloured tiles (premium quality) of size 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for light shade vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per item No. 9.00 here-in-above, but as in skirting over & including M&L 10 mm thick backing coat in cement motar 1:4, complete all as specified and directed.
Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as specified and directed.
Taking down cement plaster, any description on ceiling, RCC chajja etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and directed.
M&L for Rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces finished even and smooth with out using extra cement, complete all as specified and directed.
M&L for Rendering 10mm thick in cement mortar 1:3 on concrete ceiling surfaces / sunsheds / facia / RCC chajja, finished even and smooth without using extra cement, complete all as specified and directed. Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.
M&L for Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed.
M&L keyed pointing in cement mortar (1:3) to squared rubble masonry regular coursed or un coursed complete all as specified & directed.
M&L for preparing new plastered or unplastered surfaces and applying 2 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- OBD shall be in one or more colours/ shades all as approved by GE.
M&L for preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
Complete removal of existing treatment of wall & preparation of old decorative / painted surface of walls and applying two or more coats of 100% premium acrylic emulsion weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.
M&L for preparation of newly plastered surface of walls and applying two or more coats of 100% premium acrylic emulsion weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
M&L for preparation of newly plastered surface of walls and applying two or more coats of 100% premium acrylic emulsion weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- Paint shall be in one or more colours/ shades all as approved by GE.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.
Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.
Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and directed.
M&L pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., PCC work, complete all as specified and directed.
M&L pressed steel frames of size 125X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., PCC work, complete all as specified and directed.
S&F IInd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including hardwood or bamboo pins and rebated holes for hold fasts, bolts or screws & pelletting to heads., complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in hold fast iron fixing including necessary form work, complete all as specified and as directed.
Taking down of steel window and ventilators, complete all as specified and directed.
S&F factory made box type windows (steel) (BWM) with side hung shutter including cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
All as per item No. 31.00 here-in-above, but without glazing bars, complete all as specified and directed.
S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.
All as per item No. 33.00 here-in-above, but without glazing bars, complete all as specified and directed.
M&L for fabrication of glazed windows/louvered ventilators etc using powder coated anodised aluminium sections (minimum thickness of powder coating 50 micron) for frames, aluminium section weighing 0.55 kg/m with or without rebate for hinged/sliding windows (two track/three track), ventilators etc, appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM with louveres having suitable mechanism for tilting, 'U' shaped fillets for securing jalies etc & the likes & fixed in position, complete all as specified and as directed by Engg.-in-charge. Note : Glass panes & aluminium wiremesh shall be measured & paid for seperately.
S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and directed.
M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.
S&F glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.
S&F in replacement glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.
M&L factory Made flush shutters, 35 mm thick solid core with block board core construction as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 30mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.
S&F for 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.
M&L for 35mm thick factory made 2nd class hard wood glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.
M&L powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
M&L powder coated (any colour as approved by GE) anodised aluminium shutter(minimum thickness of powder coating 50 micron) for door, aluminium section weighing 0.55 kg/m, appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, screws etc., complete all as specified and as directed.
M&L powder coated (any colour as approved by GE) Anodised aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron) , fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F of 4.80 mm thick sheet glass oridnary quality, including M&L 25 micorn thick solar control film reflective type sticked on glass as per manufacturer instruction & rubber beading, panes of size not exc 0.5 Sqm fixed with square, complete all as specified and as directed.
S&F of 5.50 mm thick tinted glass, panes of size not exc 0.5 Sqm fixed with rubber beading square, complete all as specified and as directed.
S&F of stainless steel butt hinges 100mm size, include screws or bolts, nuts and washers to match the butt hinge, complete all as specified and as directed.
S &F of mild steel butt hinges 100mm size, complete all as specified and as directed.
S&F of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt, complete all as specified and as directed by Engr-in-Charge.
S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and as directed by Engr-in-Charge.
S&F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate, complete all as specified and as directed by Engr-in-Charge.
S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed by Engr-in-Charge.
S&F 150mm double action spring hinge, brass with phosphorus bronze wire spring bright polished, complete all as specified and as directed by Engr-in-Charge.
S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the sample of complete all as spd & directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed by Engr-in-Charge.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F for 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L a coat of red- oxide, zinc chrome primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over & including M&L a coat of pink primer complete all as specified and as directed .
M&L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed .
Taking up or down 15mm bore CPVC/steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
All as per item No. 66.00 here-in-above, but size 20/25 mm bore
Supply, laying, testing & commissioning of 16 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and directed.
All as per item No. 68.00 here-in-above, but size 20 mm bore
All as per item No. 68.00 here-in-above, but size 25 mm bore
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.
S&F in replacement of bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S & F in replacement, brass chromium plated shower rose of size 125mm with or without swivel joints fixing to steel pipes complete all as specified and as directed.
S&F in replacement angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed.
S&F in replacement stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed, (ISI Marked) suitable for 20/25mm bore, complete all as specified and as directed.
S&F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-Charge.
M&L for 6 mm thick bevelled edges high quality looking mirror, fancy type,fixed to wall with CP screw with cup washers etc complete all as specified & directed.
S & F in replacement CP central hole basin mixer with regular spout with out popup waste system with 450mm long braided hose with connecting legs and wall flanges complete all as specified and as directed. Make : Model No.QQT- 7167B of JAQUAR make or equivalent model in Cera / Kohler as approved by GE.
S&F in replacement of health faucet 80 mm dia and 1.2mtr long with wall hook and flexible tube, complete all as specified and as directed. Make : Jaquar Cat No. ALD-573 or equivalent in Kohler/ Cera as approved by GE.
S&F in replacement of glass shelf with CP frame of size 600 x 150 mm long toughed glass, complete all as specified and as directed. Make : Jaquar Cat No. CAN 1173 or equivalent in Kohler/ Cera as approved by GE
M&L for 15-18mm thick machine cut Udaipur green marble, (size & shape, shade and pattern as approved by GE) as in cooking platform over & including M&L 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges, complete all as specified and directed.
M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and directed.
S&F tubular towel rail 20 mm dia chormium plated brass 'D' type 600mm long with bracket fixed with chormium plated brass screws, complete all as specified and as directed.
S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end (as approved by GE).
Demolition of reinforced cement concrete including cutting to reinforcement as required to facilitte, as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimneys and similar suspended work, complete all as directed by Engr-in-charge.
M&L for machine cut sand stone slabs, 5 cm thick, Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.
S & F in replacement vitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 300mm long complete all as specified and as directed.
S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.
S&F viterous china bowl urinal flat back, white (Minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP stop cock 15mm bore, ,PVC connection pipe 15mm bore 600mm length, PVC waste coupling 32mm and waste pipe etc complete all as specified and as directed.
S & F in replacement urinal spreader of PTMT any colour for fixing with 15 mm dia (min weight 60 gms), complete all as specified and as directed.
S&F liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats (Min weight 105 gms), complete all as specified and as directed by Engr-in-Charge.
S&F in replacement toilet paper holder viterous china toilet paper holder, complete all as specified and as directed.
S & F CP two way angle bib cock with wall flange, screwed down high pressure,screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. Make: Model No.KUP-35041PM of JAQUAR make or equivalent model in Kohler/ Cera as approved by GE
S&F in replacement vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed.
S&F in replacement 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.
Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 110/100mm bore, incld. All fittings, complete all as directed
Dismantling of cast iron of CI / PVC soil, waste & vent pipe jointed in cement mortor of size 75mm bore, incld. All fittings, complete all as directed
Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .
Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed .
Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in floors/ fixed to walls with MS clamps of suitable size complete all as specified and directed .
Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in floors/ fixed to walls with MS clamps of suitable size complete all as specified and directed .
S&F 75 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and as directed.
S&F 110 mm bore (SWR) PVC bends any radius with oval access door complete all as specified and directed.
S&F of PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
S& F 110 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and directed.
S& F 75 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc, complete all as specified and directed.
S&F in replacement 15mm bore PVC connection for Flushing cistern 600mm long best quality with PTMT nuts, complete all as specified and as directed.
S&F stainless steel sink with drainage board, for kitchen or laboratory, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, including brass waste coupling,complete all as specified and as directed.
M&L 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor , hard standing flooring finished even and smooth without using extra cement, complete all as specified and as directed.
M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.
Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where directed
M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.
M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.
Supply only integral water proofing compound ISI Marked all as specified.
S&F rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks, complete all as specified and directed.
All as per item No. 117.00 here-in-above, but of size 1000 Ltrs capacity complete all as specified and directed.
Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.
M&L for squared rubble walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.
Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and directed.
M&L precast cement concrete block masonry using PCC 1:2:4, type B-1 solid blocks, 10 cm thick and setting in cement mortar 1:4, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate, as in sub base of floor/hard standing, incld. compaction properly & universal and laid to level, complete all as specified and directed.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.
Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.
M&L for fixing TMT bar 12 mm dia by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed.
M&L for cleaning the existing reinf of slabs, chajjas etc., & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and as directed.
M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed.
M&L for 15-20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed.
M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement, complete all as specified and as directed.
M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth, complete all as specified and as directed.
S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed.
S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.
S&F Soap Dish, viterous china white, approximate size 160 x 160 x 90 mm, fixed with CP brass screws, complete all as specified and as directed by Engr-in-Charge.
Use and waste of formwork to sides and soffits of slabs not exc. 200mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed.
Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs not exc 20cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10cm but not exc 20cm wide with fair finished surfaces, complete all as specified and as directed.
Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.
M&L reinforced cement concrete type B-1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L of RCC nominal mix type B-0 (1:2:4) using 12.50 mm agg as in lintel bend in stone masonary/ block masonary or as in lintel over 1.50 m span.complete all as specified and as directed.
S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed.
S&F mild steel TMT bar 5 mm dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed.
S&F stainless steel plate rack of size 760mm X 600mm X 200mm of approved pattern made out of stainless steel sheet 0.50 mm thick suitale for stacking 15 Nos Plates with round 8mm dia rods complete all as sample kept on GE office.
Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified
M&L for GI frame work for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including M&L for applying 02 mm thick plaster of paris over and including S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions over the frame work and preparation of ceiling board and applying two coats of oil bound distemper over & including M&L a coat of wall / ceiling care putty including dismantling of existing false ceiling of any thickness with cover fillets complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed .
M&L for salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in CM(1:1) including taking down old UNSV pipe, complete all as specified and directed.
Supply & laying jointing and testing 150mm bore reinforced concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested, suitable for 150 mm bore pipe, complete all as specified and directed.
Returning filling in excavated soil, including spreading , leveling , watering and well ramming in layer n. exc 25 cm complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.50 mtr above the starting point, complete all as specified and directed.
S&F brass body 2 levers mortice lock vertical type size 100 mm for aluminium door (as per sample), complete all as specified and as directed.
S&F Door closer hydraulically regulated, Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg fixed, complete all as specified and as directed.
S&F brass handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and as directed.
M&L french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and as directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and as directed.
S&F in replacement of PVC door seal, including taking down old u/s door seal, complete all as per specified & directed by Engg.-in-charge.
M&L for 25 mm thick (telephone black shade) granite stone or sink, as in cooking plateform, jambs, steps, pillars, wash basin counter top oval type, & similar work, machine cut, mirror polished best quality as per sample, over & including M&L 15 mm thick screeding in CM1:4 including rounding of the edges & providing suitable dia hole in the slab for the gas pipe, complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet and 5mm thick wood grain printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site on PVC frame as per manufacturer specifications and drawing, including dismantling of old u/s existing wall lining, complete all as specified and directed.
M & L in replacement fabrication of cupboard / fixed almirah shutters & similar work using pressed steel, using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all as specified and directed.
M&L for neoprene /EPDM rubber gasket, complete all as specified and directed.
E/M ITEMS Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed.
M&L modular point wiring using approved colour coding (Red , Black and Green for single phase circuits) as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and sheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/ prestressed steel sunken / concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 1 module modular cover plate(ISI Marked) cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & sheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.
All as per serial Item No.164.00 above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches complete all as specified and directed.
All as per serial Item No.164.00 above but for one 3 pin socket outlet 5/6 Amps on the independent board, complete all as specified and directed.
All as per serial Item No.164.00 above but for 16 Amps 3 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 2.50 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
All as per serial Item No.164.00 above but for 16 Amps 3 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLSH multi-stranded copper conductor with 4.00 Sqmm PVC insulated & FRLSH multi-stranded copper conductor as earth wire complete all as specified and directed .
S&F modular switch, one way, 6 Amps, 1 module, complete all as specified and directed.
S&F modular switch, one way, 16 Amps, 1 module, complete all as specified and directed.
S&F modular socket outlet, 2/3 Pin, combined 2 module, 6 Amps, complete all as specified and directed.
S&F modular socket outlet, 6 Pin, combined 2 module, 6/16 Amps, complete all as specified and directed.
S&F modular fan step regulator, 120W, 2 module, hume free and connecting electrically, complete all as specified and as directed.
S&F lamp holder insulated body polycarbonate type with back plate, including 9W LED lamp complete all as specified and as directed by Engr-in-Charge.
M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 20/22W, 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, as in repairs, including taking down old u/s material complete all as specified and directed.
Supply and fixing LED lights fitting 1x 10W, 2 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, as in repairs, including taking down old u/s material complete all as specified and directed.
S&F bldg security LED Light Luminaire of 35 Watts having IP 65/66 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 32mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.
Taking down and refixing / Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan including filling cavities with filler, one coat after cleaning all dust etc., complete all as directed.
Supply and fixing single pole neutral enclosure with two pin and earth plug and socket modular type complete with one single pole MCB 20 Amps, complete all as specified and directed.
S&F and testing factory made sheet metal enclosure for MCB DB SPN 8 way 240 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type, complete all as specified and as directed.
S&F and testing factory made sheet metal enclosure for MCB DB SPN 12 way 240 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type, complete all as specified and as directed.
Supply, fixing, testing and commissioning SPN 63 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
Supply, fixing, testing and commissioning SP 6 to 32 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection, complete all as specified and as directed.
S&F Vertical Distribution Board, double Door, suitable for 'A' Frame, incorporating 4 Pole MCCB 100 A to 160A, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, as in replacement, including taking down old u/s material, complete all as specified and as directed.
S&F for in replacement sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 64Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including M&L non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: Two runs of 6.00 Sqmm cable with one run of 4.00 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.
Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm, including taking down old u/s cable from duct/trench/pipes/pole/wall etc. with protection pipe, PCC cable cover & etc., complete all as specified and directed Note: - (i) Excavation and earthwork, sand cushioning, PCC cable cover, shall be measured and paid separately in relevant item here in after .
All as per item No. 188.00 here-in-above, but cable cross sectional area is 35 Sqmm 3.50 core
M&L for earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed.
M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed. Note :- Punned thickness shall only be measured and paid.
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150mm x40 mm, complete all as specified and directed.
Supply, Installation, testing & commissioning of Split type air conditioner electric driven (single phase), cooling capacity 1.5 Ton BEE 5 Star rating, including M&L all acessoseries like copper tubes with insulation puffs, drainage pipe of required length as per site requirement, stand for mounting the outdoor unit on wall/roof etc. complete all as per specified & directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA, complete all as specified and as directed.
Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs/Replacement unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (iii) Makes of materials will be approved by GE in writing before commencement of work. (iv)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 50 (R) to 52 (R), 52 (A) of tender document.
M/s Ajay kumar Garge
SNEH CORPORATION
HOODA CONSTRUCTION COMPANY
SN TECHNO CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .