Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.9 L
EMD Value
₹17,400
Closing Date
24 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
REGISTRAR
CUSAT, COCHIN - 22
Providing partition works for establishing a secure priting facility for degree certificates, other certificate forms and answer books in Examinaiton B (Room N.307, Administrative building, cusat
2026_CUSAT_876024_1
CUSAT/ET-71 (CIVIL) / UEU/5519/ 26-27
Open Tender
Civil Works - Others
Item Rate
60 days
CUSAT, THRIKKAKARA CAMPUS.
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,888
₹17,400
5 Oct 2026
5 Oct 2026
29 Oct 2026
5 Oct 2026
24 Oct 2026
5 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.001 | Partition Work | - | - | - | - |
| 1.01 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 487.73 | kg | - | - |
| 1.02 | For shutters of doors, windows & ventilators including providing and fixing hinges /
pivots and making provision for fixing of fittings wherever required including the
cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for
separately)Powder coated aluminium (minimum thickness of powder coating 50
micron) | 32.34 | kg | - | - |
| 1.03 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides | 80.88 | sqm | - | - |
| 1.04 | Providing and fixing 12 mm thick approved quality Hylam sheet/phenolic laminated
sheet of required shade and finish, in panelling fixed in aluminium doors, windows,
shutters, racks, partitions or frame work with C.P. brass / stainless steel screws, nuts,
bolts, washers and necessary fittings complete, including cutting, drilling and fixing
as per architectural drawings and directions of Engineer-in-Charge. Hylam sheet shall
be industrial grade, moisture resistant and laminated finish on both sides. | 27.61 | sqm | - | - |
| 1.05 | Providing and fixing 12 mm thick WPC (Wood Plastic Composite) board of approved
make and quality, having density in the range of 0.75-0.85 g/cm³ (750-850 kg/m³),
moisture resistant, termite and borer proof, with smooth decorative laminated finish
on both sides, for covering cupboards/panelling fixed to aluminium or other approved
framework using suitable C.P. brass / stainless steel screws, washers, approved
adhesives and necessary fixing accessories complete, including cutting, drilling,
grooving, edge finishing and all incidental works complete, as per approved drawings
and directions of Engineer-in-Charge. | 46.84 | sqm | - | - |
| 1.06 | Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness (weight not less than 12.50 kg/sqm) | 38.82 | sqm | - | - |
| 1.07 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm | 10 | no | - | - |
| 1.08 | Providing and fixing aluminium extruded section body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,
door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with
double speed adjustment with necessary accessories and screws etc. complete. | 5 | no | - | - |
| 1.09 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour and shade, with necessary screws etc. complete.Single rubber stopper | 5 | no | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.17 MB
etenderform.pdf
Tender Documents • 0.53 MB
BOQ_1487556.xls
BOQ • 0.22 MB
Epaymentform.pdf
Additional Documents • 0.05 MB
agreementform.pdf
Additional Documents • 0.01 MB
approvedmakelist.pdf
Other Document • 0.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .