Construction of handicrafts office building at Baramulla

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within 50mm.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 mtr span and 5 mtrs height.

Demolishing brick work manually /by mechanical means cement mortal including stacking of.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkats,

Demolishing cement concrete manually /by mechanical means incl. disposal of material within 50m lead

Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable

Earthwork in excavation by mechanical means in trenches for foundation, drains, pipes, cables etxc (not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr for cutting edge, disposed earth to be leveled and neatly dressed in all kind of soil.

Providing and laying dry stone soling tightly hand packed under foundation & under floors incld. all leads, lifts and all carriages upto site of work complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:4:8 mix (1 Cement :4 coarse sand :8 graded stone agg.40mm Normal Size) using crushed agg. Including all leads, lists and all carriages. Upto site of work complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 mix (1 Cement :3 coarse sand :6 graded stone agg.20mm Normal Size) using crushed agg. Including all leads, lists and all carriages. Upto site of work complete

Providing and laying of reinforced cement concrete of specified grade excluding the cost of centering and shuttering all work upto floor V-level in 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg.20mm normal size) using crushed agg. Including all carriages upto site of work complete.

In beams suspended floors, landing balconies, shelves, chajjas, lintels, bands, plain window

Reinforcement for RCC work including straightening cutting bending and placing in position and binding all complete.

Dry random rubble masonry with hard stone in foundation and plinth(using quarry stone with bond stone) including all carriages upto site of work complete

Providing and Laying of GSB filling in plinth etc I layer not exceeding 20cm in depth consolidating each layer by leveling, ramming, watering and making surface smooth including all carriage upto site of work complete job.

Centering and shuttering incl. strutting, propping etc. and removal of the same including foundation and plinth.

Lintels Beams plinth beams girders bressummers, cantilevers and suspended floor

Stairs

Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor 2 level in cement mortar 1:6 mix (1 cement :6 fine sand) including cost of all carriages mechanically / manually complete job.

Upto plinth level (Septic tank)

Providing/ laying of wood work in frames of doors, windows, clerestory windows and other frames wrought frames and fixed in position of impoted kail wood.

Providing and fixing glazed shutter for doors, window & clearstory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, 1st class kail wood

Providing and fixing of paneling or paneling and glazing in paneled or paneled and glazed shutters for doors & windows and clestory windows panelled or panelled and glazed shutters 35mm thick ( 1st class kail wood)

Providing and Fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1:4mm in both directions with wire of dia. 0.63mm for doors, windows and clerestory windows including ISI marked M.S pressed but hinges bright finished of required size with necessary screws of 1st class Kail wood

Providing and fixing of 40x5mm flat iron hold fast 40 cm long including fixing to frames with 10mm dia. Bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 coarse sands:6 graded stone agg. 20mm nominal size)

Providing and fixing aluminum Tower bolts, ISAI marked anodized (anodic coating not less than grade AC 10 as per IS:1868 transparent or dyed screws etc complete of size 100 x 10mm

Providing and fixing aluminum Tower bolts, ISAI marked anodized (anodic coating not less than grade AC 10 as per IS:1868 transparent or dyed screws etc complete of size 150 x 10mm

Providing and fixing aluminum sliding door bolts, ISI marked anodized anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with nuts and screws etc. complete of size 200mm

Providing and fixing aluminum handles, ISI marked anodized (anodic coating not less than dyed to required colour or shade with necessary screws etc complete of size 125mm.

Providing and fixing aluminum handles, ISI marked anodized (anodic coating not less than dyed to required colour or shade with necessary screws etc complete of size 150mm

Applying 15mm thick cement plaster on the rough side of brick wall in (1:4) cement sand mix.

Providing and laying of 50mm thick cement concrete flooring using 1:2:4 cement concrete with 50mm thick non dia stone agg. & Finished with a flooring coat of neat cement slurry.

Providing and applying plaster of pairs putty 2mm thick including scratch patches including sand papering complete job.

Providing and applying Painting with acrylic emulsion paint of approved brand & manufacture including two or more coats of primer etc complete job

Finishing walls with water proofing cement paint of approved brand to give an even shade (two or more coats)

Providing and fixing of colour coated CGI sheets roofing 0.63mm thick fixed with G.I hooks etc complete with Zinc coating not less than 275 g/m2 complete.

Structural steel work welded in built up sections/ trusses and frame work including cutting hoisting fixing in position and applying priming oat o approved steel primer all complete including painting.

Providing and fixing of 12mm thick Nordic wood paneling in gabbles, sofits T&G including frame work of 1st class budloo wood (2” x 1 ½”) and 12mm thick plywood and polishing two coats complete job.

Providing and fixing of ornamental eaves boarding for 1st class kail wood (300x400) with necessary grooves and chamber including cost of nail/screws etc.

Providing and fixing of 1st class vertified floor tiles of approved quality and shade of Somany/Kajaria laid over 12mm thick cement plaster filling with joists by white cement-based water proofing pigment complete job

P/F 1st quality ceramic glazed wall tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all color, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying priming coat with ready mixed pink or grey primer of approved brand and manufacture to give an even shade two or more coats complete job.

Painting with synthetic enamel paint of approve brand and manufacture to give an even shade two or more coats including with ready mixed of approved brand and including priming coat complete in all respects.

Providing and laying of Marble stone in flooring with 18mm thick (sample of marble shall be approved by Engineer in charge) over 20mm avg. thickness base of cement mortar 1:4 (1 cement : 4 course sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with marble.

Providing and fixing of sanitary installations: A) PVC pipe B type 100 mm

PVC pipe B type 75mm

Plain Bend 100mm

Plain Bend 75mm

Door Tee 100mm

Door Tee 75mm

Floor Trap 100

Providing and Fixing of G.I 15mm pipe complete with GI fitting and other fixtures including all cutting complete job.

Providing and Fixing of G.I 25mm pipe complete with GI fitting and other fixtures including all cutting complete job.

Providing and fixing 15mm dia C.P brass angle value with C.P brass wall flange for wash

Providing and fixing of CP brass bib cock of approved make

Providing and fixing C.P brass Sink Mixer full swing of approved make including cutting.

C.P Connections 600mm long.

Providing and fixing of health faucet with shower and flexible connectioms1.0mtr long

Providing and Fixing of C.P brass soap Dish/tray of approved make with screws complete

Providing and fixing 600x20mm C.P brass towel rail of approved make with C.P brackets

Providing and fixing SS towel ring of approved make with screws including cutting

Providing, Installation, commissioning and testing Hot water Geyser 50 liters of ISI approved make

Providing, Installation, commissioning and testing Hot water Geyser 25 liters of ISI approved make

Providing and fixing C.P stainless steel anti cockroach trap (grating) on floor traps and floor

Providing and fixing of 600 x 120 x 5mm glass shelf with edges round of supported on anodized

Providing and fixing of 600x450mm beveled edge mirror of superior glass (of approved brand)

Providing and fixing white vitreous China water closet (European type W.C pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required (JAQUAR)(WC pan with ISI marked white solid plastic sea and lid)

Providing and fixing white vitreous China water closet (Indian type) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required ( JAQUAR )(WC pan with ISI marked white solid plastic sea and lid)

Providing oven head PVC storage tank triple layer ISI Mark of approved make including allied.

Providing and fixing vitreous China pedestal for wash basin completely recessed at the back.

Providing and fixing of stainless-steel kitchen sink including making all connections excluding cost of fitting.600x450x200mm

ELECTRIFICATION Wiring for the following light points &exhaust fan points with 1.5Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole switch of approved quality in modular grid plate and GI box and Earthing of fixtures and the outlet box with 1.5sqmm PVC insulated copper wire One light controlled by 6 Amp Switch

Wiring for 240 volts single phase and neutral 16 amps switched socket outlet with 2x2.5sqmm PVC insulated copper wire in concealed or surfaced mounted PVC conduit including providing and fixing of 16amp 3 pin switched socket of approved make with modular grid plate and earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire completes as required

Wiring for ceiling fan /wall fan point same as above in item No1 but controlled by electronic stepped regulator and 6amp control switch.

Wiring for 230v ac 5- pin 3 x 6 amp socket out let for light duty power with 230v ac 6 amp sp switch on same modular grid plate with 2x2.5 sqmm PVC insulate copper wire of approved make and earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire complete as required

Wiring for 230v ac, 5pin 3x 6 amps socket outlets for light duty power with 230v ac 5/6 amps, SP switch, on same modular grid plate mounting with 2x1.5sqmm PVC insulate copper wire of approve make with modular grid plates and earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire completes as required

Wiring for circuits for light/fan/exhaust fans/AC, s etc with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (Without Conduits) A. 2x2.5Sq.mm + 1x1.5 Sq.mm

b. 2x1.5sqmm

c. 2x6sqmm +1x4sqmm

Supplying installation testing and commissioning of pre wired industrial socket including 32-amp SP MCB complete with connection as required

Supplying and fixing of following size dia PVC conduit including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting, chases and making good or surface mounted including all fixing hardware as required. a) 25mm dia

Supplying and laying of 2 pair telephone wire havells make complete as required

Supplying and fixing of telephone socket complete with connection as required

Supplying installation testing and commissioning of pre wired 15 watt led light complete with connection as required

Supplying installation testing and commissioning of pre wired celling fan complete with connection as required

Supplying installation testing and commissioning of exhaust fan complete with connection as required a. 200mm

Supplying and fixing following way, Prewired TP&N PPI Distribution Board of Sheet Steel for 415 Volts on surface/Recess complete with Ready to use DBs - Provided with 100A insulated phase bus-bars, neutral bar/s with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identification labels. The D.B should be IK-09 Compliant. (The Cost of D.B is without MCB’s) (IP Rating-43) A. 4-way (8 Module Incomer), (2+2+2 incomer DP RCCB), (4+4+4) SP MCB's O/G's)

Supplying and fixing of following size mcb’s complete with connection as required make Schneider. a. 6–32-amp SP

b. 63-amp TPN

Design, fabrication, assembling, supply, installation, testing and commission of LT sub main panel for heating (indoor type) suitable fo 415 V 3 phase 4 wire power supply system panel shall be fabricated out of 1.6mm thick CRC sheet powder coated free stand, having front doors mounted on angle iron pedestal and necessary wiring and other panel accessories compring of the following: Incomers a) 200 Amp 4 pole 36KA MCCB (ABB) b) Spreaders links & phas barriers c) 200 Amp TPN Alu BAS BAR d) Digital multifunction meter e) CT’s coils f) Indication lamps Outgoings a) 100 Amnp 4p MCCB 25KA (ABB) spreader links and phase barriers.

Wiring for sub main circuits with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to distribution board from main penal board. (Without Conduits) A 4x10 Sqmm+ 6 Sqmm

Supplying laying of following 1100-volt grade XLPE insulated PVC sheeted aluminum conductor arromed cable as per specification in existing trenches cable trays ducts over bed of sand clamps including fixing bolts connecting testing and commissioning A 50 sqmm 3.5 core

M.M.CONTRUCTIONS

MUSHTAQ AHMAD BHAT