Replacement of Defective Street Lights with new ones on old approach road at Shri Mata Mansa Devi Temple Panchkula.

Amount

(I) Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm). HSR No. 31.9 d)

( c )Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 100 Amp..to 220 Amp..415 V,10 KA 3-phase. HSR No. 31.12 c (ii)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. TP MCB of 9 KA breaking capacity 6 Amp.. to 32 Amp.. HSR No. 31.17(a) (ii)

(P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 50 mm dia on surface. HSR No. 31.21 (vi)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22(ii)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR No. 31.22(iii)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HSR No. 31.22(v)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xii)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xi)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. HSR No. 31.22(xix)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 4 Core Armoured Cable. HSR No. 31.26 (xI)

25 Sq. mm 4 Core Armoured Cable. HSR No. 31.26 (xIi)

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

(v) Pedestal . Supply and erection of Godrej Almirah type M.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . HSR No. 31.33 (iii)

(X)Miscellaneous . Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm . HSR No. 31.35 (ix) (c)

300 sqmm . HSR No. 31.35 (ix) (n)

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm . HSR No. 31.35 (ix) (d)

25 sqmm . HSR No. 31.35 (ix) (e)

Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S.rod welded / revitted at the top with 10 cm. Dia 5 mm thick G.I.plate inscribed with `cable' world on it , having a cross arm 30 cm. long of the same dia welded at the bottom , in existing trench 45 cm. below ground level . HSR No. 31.35 (xi)

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of work. HDPE 63/50 mm outer dia / inner dia HSR No. 31.67 ( i )

Supply and Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement, Terminal plate consisting of 2 nos. 100 Amp.., 4 pole neutral links including connection etc. with suitable connecting arrangements for 2 No. MCB's / Kit-Kat including cost of R.C.C 1:1, 5:3 for foundation of size 0.7 M x 0.7 M x 1.8 M with minium 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. 7 Mtr. Long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 mm x 225 mm x 12 mm. HSR No. 31.68 ( i )

Supply & erection of 4Mtr Long LuxMAx Steel Poles -140 with Cast Aluminium / Cast Iron Q4 & Q6 embellishments. The pole should be made out of Galvanised Steel Pipes & has a service window at the bottom consisting four way, 25Amp connector terminal & a suitable MCB. The poles alongwith Embellishments are primer coated and are painted with Polyurethane Paint.The pole should be complete in all respect with foundation bolts and including cost of R.C.C 1:1.5:3 for foundation of size 0.7 M x 0.7 M x 1.8 M with minium 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. Make Twinkle Luxmax, Twinkle (light), Bajaj. NS-1

Supply & erection of LED Post Top Fitting 75Watt made out of cast aluminium housing with Power LEDs are mounted directly on extruded Heat sinks. & a UV stablized PC/ PMMA diffuser is provided for Glare free lighting with high visual comfort complete in all respect upto the entire satisfaction of Engineer in Charge of the work. Make Twinkle, Model - LuxMax - Windsor LED Post Top, Twinkle (light), Bajaj. NS-2

Supply & erection of 3 Phase Street Light Panel with Astronomical Timer, Contactor 63A (TP) & TPN 63A complete in all respect upto the entire satisfaction of Engineer in Charge of the work. Make Havells. NS-3

Supply & erection of LED Street Light Fitting 90Watt having efficiency of 100Lumens per watt complete in all respect upto the entire satisfaction of Engineer in Charge of the work. Make Twinkle Luxmax, Twinkle (light), Bajaj. NS-4

Pdg. & Fixing of Single GI Bracket 40mm dia 1.25Mtr Long with 40CM long GI Coller of suitable dia to fit on 7Mtr Long GI Octagonal Pole including cost of fixing the same on street light pole 7Mtr. complete in all respect upto the entire satisfaction of Engineer in Charge of the work. NS-5

Pdg. & Fixing of Double GI Bracket 40mm dia 1.25Mtr Long with 40CM long GI Coller of suitable dia to fit on 7Mtr Long GI Octagonal Pole including cost of fixing the same on street light pole 7Mtr. complete in all respect upto the entire satisfaction of Engineer in Charge of the work. NS-6

Supply, Installation, Testing & Commissioning of Double Door 4Way TPN Vertical Distribution Board with provision of incomer MCCB upto 125Amp capacity & outgoing TP MCBs (But withour cost of MCCBs & MCBs) complete in all respect upto the entire satisfaction of Engineer in Charge of the work. Make: Havells/ Standard / L&T. NS-7

Som Nath Contractor

J V ELECTRICALS

M/S Mohan Lal Gupta