DEVELOPMENT OF YOGA SHED IN WEST ZONE AREA GARDEN (ABOVE/BELOW)

DESCRIPTION Unit Quantity Rate Amount

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of

columns and Mass concrete

5 Providing and laying controlled cement concrete Cumt 6.00

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in

(C)Slabs,landing,shelves,Balconies, Lintels, Beams,

Girders and Cantilever upto floor two level.

Brick work using common burnt clay

building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional

Brick work using common burnt clay building

7 bricks having crushing strength not less than 35 Cumt 198.00

kg./Sq.Cm in superstructure above plinth level

upto floor two level (B) Conventional

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

8 propping and centering below supporting floor to Sqmt 6.00

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases

of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (B) Flat surfaces such as soffits of

supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Structural steel work ( Confirming to IS 4923-1997)

riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming

coat of approved steel primer all complete as per

the structural designs and directions of Engineer in

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand)

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat

of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

13 brushing, interior to give an even shade including Sqmt 1200.00

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Providing TMT Bar FE 500D reinforcement

15 for R.C.C. work including bending, binding KG 18000.00

and placing in position complete upto floor

Filling in foundation and plinth with

16 murrum or selected soil in layers of 20cm. Cumt 408.00

thickness including watering, ramming and

consolidating etc. complete.

Filling in foundation and plinth with brick Bats

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

18 Providing & fixing Polished granite stone 20 to 25 Sqmt 636.00

19 Providing & fixing Polished granite stone 20 to 25 Sqmt 792.00

mm thick colour

20 Applying mirror finishing on marble/Kotta stone Sqmt 1410.00

Planning , Designing and cutting by CNC laser

cutting in require shape and size on M.S. 3mm

thick sheet including Powder coating on it

PROVIDING CORRUGATED F.R.P. SHEETS ROOFING

FIXED WITH GALVANISED IRON J OR L

HOOKS,BOLTS AND NUTS 8MM DIAMETER WITH

BITUMEN AND G.I. LIMPET WASHER,FILLED WITH

WHITE LEAD COMPLETE EXCLUDING THE COST OF

PURLINS,RAFTERS AND TRUSSES.(R.A.)

I/We am/are willing to carry out the work at… ....................... % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above. Amount

of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct ………% below Add ………% Above

In words In words