T-08/EDCP/2024-25

Amount

Carriage Of Following Line Material From Store Centre-Pilibhit To Site Including Measuring, Weighing, Loading, Unloading At Both Ends And Proper Stacking At Safe Site Under Edd- Puranpur (Distance Up To 60 Km.)

ST Pole 11 mtr. Long

PCC Pole 8.5 mtr. Long

11 KV Composite Polymer Pin Insulator

11 KV Pin Nut With Bolt

11 KV V-Type Steel Cross-Arm 65x65x6 MM

11KV Comp. Poly. Disc Insulator 45kn T&C

11KV Disc Fitting (B&S) 70kn

A.C.S.R. Dog Conductor

A.C.S.R. Weasel Conductor

ABC (1x16+ 1x25) Sq.MM

ABC (3x120 + 1x95 + 1x16) Sq.MM

ABC (3x50 + 1x35 + 1x16) Sq.MM

Cable Box I/D 11 KV 3x120 XLPE

Cable Box O/D 11 KV 3x185 XLPE

Cable H.T.XLPE 11 KV 3x120 Sq.MM.

Cable H.T.XLPE 11 KV 3x185 Sq.MM.

Composite Poly. Disc Insulator 70kn B&S

Cross Arms V-Type 11 KV

Cross Arms 33 KV 100x50x6 M.M.

Earth Rod complete

G.I.Wire 10/6 SWG

Pin Insulator 11 KV

Pin Insulator 33 KV

Stay Rod 20x1800 M.M.

Stay Set 16x1800

Stay Wire 7/10 SWG

Stay Wire Gi(7/4.0MM) 7/8 SWG

Tee-Off Channel complete

33 KV Top Channel complete

11 KV Top Channel complete

M.S. Angle 65x65x6 M.M. complete

M.S. Channel 100x50x5 M.M. complete

33 KV Bracing Angle.

33 KV Stay Insulator

Gaurding Angle 50x50x5x2500 MM complete.

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawings all type clamps nut bolt, washer to be provided by contractor.

Single ST Pole 11 Mtr. Long.

Double Pole Structure ST Pole 11 Mtr. Long Complete With Bracing.

Single PCC Pole 8.5 Mtr. Long.

Double Pole Structure PCC Pole 8.5 Mtr. Long Complete With Bracing.

Concreting Of Supports At The Time Of Erection Of Pole In 1:4:8 Concrete Ratio From Bottom Of Pole To Ground Level And Plinthing Of Supports Upto 300MM Above Ground Level By Using Cement, Sand & Coarse Aggregate In Ratio 1:4:8 As Per RESSPO Drawing With Watering/Curing Properly Upto Proper Setting Of Plinthing. All Matrial Would Be Provided By The Contractor.

Earthing of ST/PCC Poles of the line is to be done by inserting the MS earth rod into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Laying and sagging of 3 phase ACSR Weasel conductor from double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect.

Laying and sagging of 3 phase ACSR dog conductor from double pole at tapping point of 33 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect.

Laying of AB Cable (1x16+ 1x25) Sq.MM

Laying of AB Cable (3x120 + 1x95 + 1x16) Sq.MM

Laying of AB Cable (3x50 + 1x35 + 1x16) Sq.MM

Laying of 11 KV , 3x120/185 Sq mm XLPE Cable (single circuit) by digging method by trench depth minimum 1.2 mtr. Below ground level and 450 mm wide by excavation of earth. Including supplying of fine sand, bricks, stone slab, refilling and ramming of the left out soil and levelling etc.

Laying of 11 KV XLPE Cable of size (3x120) Sq.MM by drill method complete work in all respect.

Construction of 250/400 KVA T/Fs plinth of size 5 fit x5 fit x5 fit with the help of first class bricks, cement & coarse sand as per norms. Filling the structure completely by brick blast & plastering work of walls Including CC work on top in ratio 1:2:4 by cement, stone grit & sand and grouting of 2 nos. M.S. channel of size 50x50x5 mm on the top of T/Fs plinth whole work should be done as per RESSPO norms complete in all respect. (All Material will be provided by Contractor own his cost).

Mounting of 250 and 400 KVA T/F on newly constructed plinth, laying of cable jumpering and making all HT/LT connections complete work in all respect.

Fabrication and grouting of wire mesh fencing of 28 fit running length in rectangular shape height 2 meter with M.S. angle of size 50x50x06 mm. including gate at one side as per norms complete work and painting of same with 2 coats of red oxide and 2 coats of synthetic enamale paint. (All Material will be provided by Contractor own his cost).

Earthing of T/Fs by boaring type up to water level as per norms of UPPCL by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor on his own cost).

Opening and Shifting of distribution transformer 25/100 KVA on D/P with jumpering and making all HT/LT connections complete work in all respect.

Hosting cable on pole by providing MS Pipe 4"x3 mtr long required clamped. complete work in all respect. For 11 KV XLPE cable 3x120/185

Termination of ID/OD Jointing kit

Guarding Of Lt Line Road/River Crossing Etc. By Providing G.S Earth Wire 7/16 S.W.G/G.I. Wire No. 8/10 And Making Net With Different Of 1 Meter Completely Including Fixing Of Channel/Angle Etc. With Proper Locking At Each Support. All Type Of Nut And Bolt Would Be Given By The Contractor (G.I. Wire Will Be Provided By The Department.)

Dismantling Of Exixting Cable/Conducting Of Line & Its Related All Accessaries Etc. And Received Back Material Carriage From Work Site To Store Centre, Pilibhit With Loading & Unloading And Proper Stacking. (Distance Up To 60 Km.) Complete Work In All Respect.

Providing and fixing of 11 KV Stay Loop Insulator

Providing and fixing of Barbed Wire

Providing and fixing of Cross Arm Holding Clamp

Providing and fixing of Cross Arm Holding Clamp For STP

Providing and fixing of Dead End Clamp

Providing and fixing of I Hook with suspension clamp

Providing and fixing of Earth Wire Clamp For Rail

Providing and fixing of Gaurding Angle Clamp

Providing and fixing of Gi Pipe 6'' dia

Providing and fixing of Guarding Channel Clamp With Bolt & Nuts

Providing and fixing of Holding Clamp For Pcc Pole 8.5 Mtr.

Providing and fixing of Holding Clamp For Round Pole

Providing and fixing of Number Plate

Providing and fixing of Base Angle

Providing and fixing of Stone Pad

M/S MEGHA ENTERPRISES

BHARAT ELECTRICAL TRADERS