BID DOCUMENT FOR PROVIDING AND ERECTING LED STREET LIGHT, CABLE,MCB AND CONTROL PANEL AT EXCISTING POLL IN VARIOUS AREA AT PADRA NAGAR PALIKA UNDER: SWARNIM JAYANTI MUKHYA MANTRI SHEHRI VIKAS YOJANA YEAR: 2025-26.

Quantity Discription Unit Amount

1 24.00 providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections & complete erected in existing

G.M.S. housing. Cat.II

2 24.00 Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having

characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component for following Max.

rating erected as directed.(iii) 63 Amps. FP Cat.III

3 24.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity (c)63 Amp. Cat.III

4 5260.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables. (B)

core 6 Sq. mm 92.92 Mtr.

5 3000.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

SBD SECTION-7 BILL OF QUANTITIES-169

6 26.00 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection. (iii) above

to 36 watts Cat-lll

7 20.00 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection. (i) above 36 to 48 watts Cat-lll

8 24.00 Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

SBD SECTION-7 BILL OF QUANTITIES-170

9 24.00 Supplying & Erecting Power Contactor for time switch complete

erected as per directions Cat-III. [D] 4 pole 440V 40 Amp.

10 24.00 Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made from 35 X

X 5 mm thick MS angle.

Add 18.00 % GST Rs.

I / We am/are willing to carry out the work at _____________ % above / below (percent should be written in figure

and in words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

( In words ) _________________________ Percentage above / below the estimated rate.

Estimated Amount put to tender Rs.

Deduct _______ % below Rs. Rs.

Estimated Amount put to tender

Add _______ % above Rs. Rs.

Total Amount Rs.

Total Amount Rs.

*( Please strike out whichever is not applicable)

Note :1 All work shall be carried out as per Public Works Department Hand Book and other specifications of Division or as

Note :2 Rates quoted include clearance of site (prior commencement of work and its close) in all respects and hold good for

Note :3 I/ We have read the conditions mentioned in this tender and agree to abide by the same.

Note :4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as

per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item

at the rate of input rate mentioned in all the tender.

Signature of Contractor President Chief Officer

Padra Nagarpalika Padra Nagarpalika

SBD SECTION-7 BILL OF QUANTITIES-171