Special repair to certain OMQ (Bldg No. P-426)( Ph-I) at AFS Tezpur

Amount

B/R PORTION Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

M&L 25 mm thick cement concrete B-0, 1:2:4 (12.5 mm) graded aggregate in sub floor with 3% wpc of cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under relevant item.

M&L Cement concrete in shunk portion filling in mass concrete Type E2 1:5:10 (using 40mm graded aggregate) complete all as specified and directed .

M&L filling of broken Bricks in floors or pavings, laid in layers n exc.15cm thick , spread, levelled and blinded with earth and rammed including watering complete all as specified and as directed.

M & L an elastic liquid applied , crack bridging 2 pack acrylic polymer modified cementitious water proofing coating system primer coat Sika Top Seal - 109 hi Primer consumption primer coat 0.2 kg/sqm ,Base coat Sika Top Seal - 109 hi consumption base coat 0.7 kg/sqm Top coat Sika Top Seal - 109 hi consumption primer coat 1.5 kg/sqm Density 1.6 kg/ltrbond strength 2.0 N/mm OR Nitco Proof 100 & 120 of M/s Fosroc chemical ( priming coat of Nitoproof 100 & one susequent coat of Nitoproof 120 ) all as per manufacturing instruction. Note:(i) This item is applicable for sunken portion . (ii) Contractor shall arrange the applicator of the firm who will carriedout the said treatment on ground. Hence work against this item shall be carriedout from the manufacturer and unit rate of this item is also includes this element. (iii). Nothing extra is admissible on account of any misunderstanding.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water complete all as directed.

Material and labour rendering 10 mm thick plaster in CM (1:4) on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 15 mm thick plaster in CM (1:6) on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Supply only integral water proofing compound.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads shoes, bends, swan-necks, etc., including removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

M&L brick work with locally available best quality sub class ‘B’ brick, old size, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed.

Disconnecting water tank, float valve with float arm and outlet pipe from PVC service water tank, empting stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and finally washing the internal surfaces with bleaching powder, closing wash outlet, re-fixing water tank, float valve and out let in proper position, closing the top cover including minor repair if required and testing complete including writing “Cleaned on:_____(Date)” 2” height on outer face of tank with white paint of capacity exc 500 litres but n. exc. 1000 liters complete all as directed.

S&F rotational moulded polyethylene water storage tank 1000 ltr capacity (cylindrical vertical with closed top and three layred) hoisted and fixed in position including dismantling of existing tank and removing from site complete all as specified.

S&F as in repair Ball brass valve 20mm bore high pressure with polythene float and fly nut complete screwed for iron pipe all as specified.

Taking up or down 15mm bore steel tubing and connections, including removal to store complete all as directed.

Taking up or down 20mm bore steel tubing and connections, including store complete all as directed.

M&L 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

M&L 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

Refixing of old 15 mm bore of tubes and connection in new or old position ( walls,ceiling,floors, etc.) complete all as specified and directed.

Refixing of old 20 mm bore of tubes and connection in new or old position ( walls,ceiling,floors, etc.) complete all as specified and directed.

Supply and fixing in repair 20mm Gun metal gate or globe valve with iron wheel head, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair, plastic water closet seat cover, white/ black, closed pattern with flat bottom, and mild steel chromium plated or aluminium hinging device complete all as specified.

S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs 32 mm dia X 800 mm waste pipes for sink/wash hand basin including coupling complete all as specified and directed.

S&F in repair Vitreous China wash hand basins white colour and flat back of size 540 mm x 400 mm excluding taps , waste chain and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair stop valve fancy type, chromium plated with long shank and cup (concealed type), screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified and directed.

Supply and fix in repair 15mm bore dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make: Jaquar Cat No. FLR-5273UPR or equivalent Model in CERA/KOHLER

Supply and fix in repairs 15mm CP central hole basin mixer complete all as specified and as directed. Make:Jaquar Cat No.CON-CHR-167KNB or equivalent Model in CERA/KOHLER

S&F in repair stop valve/ angular stop cock fancy type, chromium plated, screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified.

S & F as in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified.

S & F as in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, complete all as directed by Engr in Charge.

S & F as in repairs 50 mm bore high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S & F in repairs 15 mm bore bib taps of chromium plated complete all as specified Make:Jaquar Cat No.FLR-5047N or equivalent Model in CERA/KOHLER

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S &F 75 mm bore PVC (SWR) bends any radius complete all as specified.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified.

S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

S & F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S & F 110 mm bore PVC (SWR) reducers complete all as specified.

Supply and fix in repair grating doom round with waste hole, 100mm size of PTMT, (min weight 25 gms) complete all as specified and directed.

S&F Nahani traps 75 mm with jali complete all as specified and directed.

Supply and fix in repairs 15 mm CP health faucet with tube and hook complete all as specified and as directed. Make and model No.Jaquar-ALD-CHR-593N or equivalent Model in CERA/KOHLER.

Supply and fix in repairs CP soap dish complete all as specified and as directed. Make and model No. Jaquar-AKP 35731P or equivalent Model in CERA/KOHLER.

Supply and fix in repairs CP towel rail 600mm long complete all as specified and as directed. Make and model No. Jaquar-AKP CHR-35711P or equivalent Model in CERA/KOHLER.

Supply and fix in repairs CP toilet roll holder complete all as specified and as directed. Make and model No. Jaquar-AKP CHR-35751P or equivalent Model in CERA/KOHLER.

S&F in repairs Over Head shower rose 200mm x 200 mm size, 195mm long flange with arm complete all as specified and directed. Make and model No. Jaquar--OHS-1843 or equivalent Model in CERA/KOHLER.

Supply and fix in repairs for glass shelf 600 mm long. Make-Jaquar Cat Part No ACN-1171N or equivalent Model in CERA/KOHLER.

S&F in repairs stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 1065 mm x 510 mm x 200mm bowl size 510 mm x 405 mm complete all as specified and directed.

M&L in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking down wooden /steel chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.50 Sqm each incl removing to store.complete all as directed.

Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and as directed.

Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fix in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) but exc 1.50 qm and n exc 4.0 Sqm each incl removing to store.complete all as directed.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as directed.

S & F 2nd class HW plain solid straight chowkats and frames,wrought, framed rebated on the solid rounded or chamfered put together with glue pinned joints.complete all as directed.

S & F 35 mm thick 2nd class hard wood glazed & skeleton shutters open rebated and prepared to received glass,gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Pt-I,Sec 8,Clause 8.20 complete.complete all as directed.

Supply and fix 35mm thick factory made plain framed, panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete.complete all as directed.

Supply and fix butt hinges 100mm long cold rolled medium weight complete all as specified and as directed.

Supply and fix 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and as directed.

Supply and fix 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Cutting holes in brick wall built in cement mortar for inserting hold fast and making good the dismantled portion in cement mortar 1:3 or 1:2:4 type B1 as rquired exceeding half brick but not exceeding one brick complete all as specified and directed.

Supply and fix mild steel works as in hold fast and similar work confirming to Fe-410 or Fe-310 complete all as specified and directed.

S&F steel window with side hung shutter in proper position incl projecting type hinges with steel handle and steel peg stey complete with glazing bars dove telled or welded and finishing the disturbed surfaces complete as directed

Ditto,as Item no 76 but without glazing bars

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane.complete all as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire stapples.complete all as directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire stapples.complete all as directed.

S&F in repair aluminium anodised tubular curtain rod 20 mm dia complete all as specified and directed.

S&F aluminium anodised Brackets for tubular curtain rod complete all as specified and directed.

Material and labour preparation of newly or previously untreated wooden surfaces applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

-ditto- all as per item No 83 here in before but on steel surfaces over one coat of red oxide primer.complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as directed.

Material and labour rendering 10 mm thick plaster in CM (1:3) on brick work for fixing wall tiling complete all as specified and as directed.

Material and labour coloured glazed ceramic tiles 450mm x 300 mmx 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.

Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L Vitrified Ceramic tiles light shade 10 mm thick(square/ rectagular) polished, area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified

Dismantling of timber boarding of any descriptions fixed in any position with nails complete all as directed.

M&L 18/19 mm thick pre-laminated particle board interior grade prelam on two side with decorative choice lamination and other side balancing white lamination fixed to timber frame work with screws complete all as directed.

S&F 12 mm thick ply wood, grade BWP type, fixed with screws to timber frame work complete all as directed.

S&F 12 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, complete all as specified and directed

S&F 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured of sectional area exc 13 sqcm and not exc 25 Sqcm fixed complete all as specified.

S&F in repair 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.complete all as directed.

Supply and fix in repair magnetic catch in wooden frame including necessary fixtures complete all as specified and as directed.

Supply and fix in repair 40mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Material and labour preparation of old decorated plastered surfaces, and applying one coat of white washing on wall surfaces complete all as specified and as directed.

All as per serial item No.100.00 here-in-before but on ceiling.

Material and labour preparation of old decorated plastered surfaces,washingh rubbing down and stoping of distempered and painted surface and applying one coat of oil bound distemper complete all as specified and as directed.

Material and labour for complete removal of existing treatment, including preparation of platered or unplastered surfaces of wall and applying Two coats of exterior emulsion paint (weather coat) in any shade or colour over one coat of primer as approved complete all as specified and as directed.

Material and labour preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour preparation of old painted steel or iron surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour preparation of newly plastered brick wall surfaces over 10cm width or girth and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and as directed.

Material and labour preparation of new plastered surfaces, and applying three coat of white washing on wall surfaces complete all as specified and as directed.

Material and labour preparation of new plastered surfaces, and applying two coat of exterior emulsion paint complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workcon- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples to wood or steel members not exc 4Kg/Sqm, complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Gde E-250 quantity B, complete all as specified and directed.

Material and labour preparation of newly or previously untreated steel surfaces n.exc 10cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

E/M PORTION Taking down carefully copper/ aluminium point wiring (light/fan/bell/ socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed.

Taking down carefully sub main wiring of any type and size including fittings and fixtures, removing materials from site complete all as directed.

Disconnecting from electric circuit and taking out existing unserviceable SFUS, MCB DB SPN/ TPN or change over switches etc any number of ways including MCB etc removing materials from site and making good disturbed surfaces of floors/ walls/ ceiling etc complete all as specified and directed.

Materials and labour point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core, drawn through existing PVC/ steel concealled conduit not less than 20mm size complete with all fittings and accessories, fixed to walls/ ceiling, including sunk cast type pressed steel terminal boxes 1.25mm thick with 2.2 mm plastic laminated sheet (Hylem) top cover for mounting switches/ regulator etc including 1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one light point/ one fan point controlled by one one way switch complete all as specified and as directed.

All as per serial item No.117 here-in-beforebut for one light point controlled by two way switches.

All as per serial item No. 117 here-in-before but for one 3 pin 5 amps switch socket out let on independent board.

All as per serial item No. 117 here-in-before but for one 3 pin 5 amps switch socket out let on same board.

All as per serial item No.117 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board.

Supply and fix switch piano, flush button single pole one way 5 Amp complete all as specified and as directed.

Supply and fix switch piano, flush button single pole two way 5 Amp complete all as specified and as directed.

Supply and fix bell push, flush type 5 Amp complete all as specified and as directed.

Supply and fix socket out let 3 pin 5 Amps, flush type complete all as specified and as directed

Supply and fix switch socket combination 2 in 1, 3 pin 5 Amp flush type universal complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal complete all as specified and as directed.

Material and labour ceiling rose, surface bakelite, 65mm x50mm three terminals complete all as specified and as directed.

Supply and fix fan regulator electronic type rotary step, 120/280 volts complete all as specified and as directed.

Supply and fix call bell multi music type complete all as specified and as directed.

Supply and fix LED batten with tube 1 x 20 Watt, 6500K, System Luminous Efficacy more than 100 lm/W with high quality aluminium extruded with decorative end caps with three year warranty including taking down old light fittings any discription capacity size including disconnection of all electric connections and removing unsv materials off the site of work and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

Supply and fix nero surface mounted downlight round/Square LED panel aluminium die cast housing 12 watt LED 6500K complete all as specified as directed.

Supply and fix lamp holder, insulated body, angular type with back plate for batten fitting including LED lamp 9 Watt complete all as specified and as directed.

S&F sheet metal enclosures MCB DB 8 way SPN, double door, with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed.

S&F sheet metal enclosures MCB DB 4 way TPN, Vertical type , with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed.

Supply and fix in repair Miniature circuit breaker (MCBs) Single Pole, 240 Volts, 10KA, 6 to 32 Amps, 'C' curve complete all as specified and directed.

Supply and fix as in repair MCB SPN 6 to 32 Amps 10KA ‘C’ series 240 volts complete all as specified and as directed.

Supply and fix as in repair MCB SPN 40 Amps 10KA ‘C’ series 240 volts complete all as specified and as directed.

Supply and fix in repair Miniature circuit breaker (MCBs) Triple Pole and Neutral, 415 Volts, 63KA, breaking capacity 'C' curve complete all as specified and directed.

Supply and fix backlite blanking plate in lieu of MCB's complete all as specified and directed.

Material and labour two single core PVC insulated unsheathed cable 4.0 sqmm (Nominal aera) with multistranded copper conductor cable, 1100 volts grade, drawn through existing PVC concealled conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 4.0 sqmm (Nominal area) with ultistranded copper conductor (green), 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

Material and labour two single core PVC insulated unsheathed cable 6.0 sqmm (Nominal aera) two run with multistranded copper conductor cable, 1100 volts grade, drawn through existing PVC concealled conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 6.0 sqmm (Nominal area) with ultistranded copper conductor (green)one run 1100 volts grade for sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note:- (i) Two run of wiring cable, one run of earth wire shall be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in gournd (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanized 4 mm dia earth wire as earthing lead upto 7.5 mtrs from testing point fixed by means of steel bolts, nuts, check nuts and washer, of galvanized earth wire protected by 25mm bore medium grade galvanised iron pipe and other end connected to earthing test point including funnel with watering pipe of 20mm bore light grade galvanised iron, wire mesh, charcoal or coke and common salt in alternate layer of 15cm (Compacted thickness) all around earth electrode with concrete earth pit in PCC (1:3:6) type C-1 50mm thick precast RCC M-20 nominal mix cover slab of size 450mm x 450mm reinforced with 8mm dia TMT bar 10 cm C/C and suitable handle of 10mm dia round bar including necessary execavation, earth work in soft / loose soil and deposited soil to a distance n.exc 50 M and necessary testing complete all as shown in electrical plate No. 3 of MES shedule of SSR Part-I complete all as specified and as directed.

Supply and fix GI wire dia 4 mm size complete all as specified and as directed.

M/S Luit Construction

M/S A K MITRA

M/S Annu Electronics

M/S Mandeep Singh

M/S Kangkans

SHRI D. C. BISWAS

M/S N G CHOWDHURY