Repair/replacement of geysers, ceiling fans, exhaust fans, summer appliances and other connected works at Charri Camp and Mil Stn Dharamshala

Amount

Taking down exhaust fans 250/ 300/ 380/ 450 mm sweep, and properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of exhaust fan, complete all as specified and directed by Engr-in-Charge. Note: Spare parts will be measured and paid separately at 'supply only rates'.

Supply only ball bearing of exhaust fans of any size and type all as per site requirement including greasing, complete all as specified and directed by Engr-in-Charge. Make: SKF/NBC/ABC

M&L for rewinding of exhaust fan of 225 to 300 mm sweep complete with super enameled insulated copper wire of appropriate size , including all winding, insulating material and impregnation of insulating varnish as per detail given below of any make, type, model including transportation from E/M store yard to site of rewinding, complete all as specified and directed by Engr-in-Charge.

All as per item No. 03 above but exhaust fan of 450 mm sweep, complete all as specified and directed by Engr-in-Charge.

Painting to exhaust fans after due preparation of surface 225/300/380/ 450 mm sweep complete at site with super enamel synthetic paint of colour as per old one by spray gun including filling cavities with filler, two coats after cleaning all dust, grease, smoke spots etc, complete all as specified and directed by Engr-in-Charge.

Supply only copper alloy bush of exhaust fan any make and size all as per site requirement, complete all as specified and directed by Engr-in-Charge.

Supply and replacing the deshaped blade from exhaust fan of any size, complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fans 1200/1400mm sweep, and then properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of and also writing MES No. existing with black paint, complete all as specified and directed by Engr-in-Charge. Note: Spare parts will be measured and paid separately at 'supply only rates'

Strip opening of unserviceable ceiling fan 230 volts 1200/1400 mm sweep any make for taking repairs/greasing /oiling, reassembling and testing after repairs/greasing etc, complete all as specified and directed by Engr-in-Charge.

M&L for rewinding of ceiling fan motor 1200 mm sweep any make with super enameled copper winding wire of gauge as per existing including cutting and getting out old US winding, sleeve work, varnishing with E class insulation varnish , threading ,connections with twin core copper flexible wire of suitable size of length not more than one mtr with each fan. Material to be used as per ISI marked, complete all as specified and directed by Engr-in-Charge. Note: (i) Repaired ceiling fan shall be fixed by the contractor in any loaction of Dharamshala cantt & Charri at his own cost and transport.

Supply only ball bearing of ceiling fans of any size and type all as per site requirement including greasing, complete all as specified and directed by Engr-in-Charge. Make: SKF/NBC/ABC

Supply only gun metal copper alloy bush for ceiling fan any type and size as per existing one, complete all as specified and directed by Engr-in-Charge.

Supply only capacitor of size 2.5 MFD for ceiling fan, complete all as specified and directed by Engr-in-Charge.

supply only canopy of ceiling fan of size and make as per existing one as required at site, complete all as specified and directed by Engr-in-Charge.

Supply only down rod of ceiling fan with heavy grade of 15mm size pipe complete with drilling holes,cutting and making threads as per site requirement up to 0.75mtr icluding painting with two coats of white paint, complete all as specified and directed by Engr-in-Charge.

Supply only bolts,nuts and washers,rubber reel, split pin of appropriate size as required at site for ceiling fan of any size, complete all as specified and directed by Engr-in-Charge.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc, complete all as specified and directed by Engr-in-Charge.

Supply only of ceiling fan blade suitable for 1200mm/1400 mm sweep, complete all as specified and directed by Engr-in-Charge. Make : Bajaj/USHA/CG

Taking down carefully geyser 50/35/25 Ltr capacity from wall after unscrewing nut/bolts and opening the same for taking out internal tank, syphon assembley etc and reassembling and refixing after repair all as specified and as directed by Engr-in-Charge. Note: Spares shall be measured and paid sepratley under respective items of Sch.

Supply only heating unit (element) ISI marked of 1500 watts triangular shape rating as required at site including rubber washers, complete all as specified and directed by Engr-in-Charge. (As per sample) Make : Umpire/Wondercool/Ditz/ Toshiba

All as per Serial item No 20 above but circular shape, complete all as specified and directed by Engr-in-Charge. Make : Umpire/Wondercool/Ditz/ Toshiba

Supply and replacement internal steel tank of geyser 25 ltr capacity complete with syphon –assembly, 1.5 kw element , rubber gasket , thermostat switch , complete all as specified and directed by Engr-in-Charge. Note: The tank shall be tested at site and shall be able to with stand the requisite pressure. Necessary testing equipment shall be arranged by the contractor .

Supply and replacement internal steel tank of geyser 50 ltr capacity complete with syphon –assembly, 1.5 kw element , rubber gasket , thermostat switch , complete all as specified and directed by Engr-in-Charge. Note: The tank shall be tested at site and shall be able to with stand requisite pressure . Necessary testing equipment shall be arranged by the contractor .

Supply and replacement of syphon assembly made out of brass of 50 ltr capacity including necessary studs screws and rubber gasket/washers, complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 24.00 above but 25 ltr capacity, complete all as specified and directed by Engr-in-Charge.

Supply and replace glass wool of 25 ltrs capacity geyser, complete all as specified and directed by Engr-in-Charge.

All as per Srl item 26.00 here in before but in 50 ltrs capacity geyser, complete all as specified and directed by Engr-in-Charge.

De-scaling of geyser of capacity 25/50 ltr after taking down the geyser from wall, strip opening the assembly, de-scaling the syphon assembly and refixing with existing location, re-installation of geyser complete all as specified and directed by Engr-in –Charge.

Supply and replace PVC connection 15mm dia complete with brass flair nuts at both ends. (ISI marked and suitable for hot water supply upto 100 degree celcius), complete all as specified and directed by Engr-in-Charge.

Supply and replace brass pressure relief valve chromium plated suitable for geyser 25/50 ltr capacity, complete all as specified and directed by Engr-in-Charge.

Supply and fixing anchor bolt 12mmX100mm long, complete all as specified and directed by Engr-in-Charge. Note: Anchor bolt shall be grouted with hammer drill only.

Supply and replacement of defective mild steel base plate cup any type with screws of suitable size as per requirement, complete all as specified and directed by Engr-in-Charge.

Supply only ISI marked thermostat range 0°-75°C for the geysers of 25 to 50 Ltr capacity, complete all as specified and directed by Engr-in-Charge.

Supply only 15mm stop valve CP fancy type,cast copper alloy,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe unions and suitable, complete all as specified and directed by Engr-in-Charge.

Supply only non return valve 15mm dia cast copper alloy ISI mark, complete all as specified and as directed by Engineer-in-Charge.

Supply only Indicator lamp rectangular/ round type, complete all as specified and directed by Engr-in-Charge.

Supply and replace CP connection brass with flair nuts as per sample, complete all as specified and directed by Engr-in-Charge.

Supply only GI union 15mm dia complete for fixing the non return valve, complete all as specified and as directed by Engr-in-Charge.

Cleaning / scrapping of old paint/dust and painting of geysers of 25/35/50 litres capacity at site/ stores with two coat of super enameled painting by spray, complete all as specified and directed by Engr-in-Charge.

Supply and fixing mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lenghts, with and including all fittings such as sockets,bends,elbow,unions,tees diminishing pieces etc, fixed to wall or ceiling or in floor, complete all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 8 way, double door, 240 volts with 200 Amp rated bus bar, including taking down the existing and making good distrubed surface, complete all as specified and directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SP 5 to 32 Amp complete all as specified and directed by Engr-in-Charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SPN 32 Amp complete all as specified and directed by Engr-in-Charge.

Supply and fixing plug top 15 Amp three pin for geysers, complete all as specified and directed by Engr-in-Charge.

Supply and fixing metal clad socket three pin for geysers, complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apartincluding 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, complete all as specified and directed by Engr-in-Charge. Make-: Philips/Bajaj/CG/Polycab/Halonix

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge. Make-: Philips/Bajaj/CG/Polycab/Halonix

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed by Engr-in-Charge. Make-: Philips/Bajaj/CG/Polycab/Halonix

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge. Make-: Philips/Bajaj/CG/Polycab/Halonix

M&L for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size, complete all as specified and directed by Engr-in-Charge.

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engr-in-Charge.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all specified and as directed by the Engr-in-Charge.

S&F in replacement of existing UNSV sealed unit for Refrigerator of any capacity including Gas filling complete all as specified and directed by Engr-in-Charge. Make : LG/Kirloskar/Kelvinator/Tecum seh/Godrej/Copeland.

M&L for charging oil and R-134A gas for refrigerator any capacity after rectifying leakage and testing, complete all as specified and directed by Engr-in-Charge.

Supply and Replacement of cooling coil for refrigerator of any capacity and makes, complete all as specified and directed by Engr-in-Charge.

Supply and fix magnetic door gasket for refrigerator of capacity complete all as specified and directed by Engr-in-Charge.

Supply and Replacement of over load protector suitable for refrigerator of any capacity complete all as specified and directed by Engr-in-Charge.

Supply and Replacement of Starting relay for refrigerator of capacity 165 to 310 ltrs capacity complete all as specified and directed by Engr-in-Charge.

Supply and Replacement of biometal timer for frostfree refrigerator, complete all as specified and directed by Engr-in-Charge.

Supply and Replacement of fan motor for frostfree refrigerators of capacity 165 ltr to 310 ltr, complete all as specified and directed by Engr-in-Charge.

Removing of water cooler of various sizes from existing position servicing with HCL acid and water solution and refixing the same on its original position with insulating, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of existing UNSV cooling Thermostat switch No 10180 for Refrigerator of any type, complete all as specified and directed by Engr-in-Charge.

Supply and install voltage stablizer of capacity 0.5 KVA, complete all as specified and directed by Engr-in-Charge.

M/S SAROOP ELECTRICAL & MECHANICAL WORKS

VIRAT CONSTRUCTIONS

Mahashakti Enterprises

M/S MALHI CONSTRUCTIONS

Eshaan Construction Co.