Supply and Fixing of 13.5 Meter Decorative Highmass Light At 5 batti Circle Jodhpur

Amount

Supply and fixing of stainless steel 304 grade stainless steel pipes, flats, strips etc. as per instruction of engineer incharge.

Supply and fixing of 13.5 Mtr. Decorative Cast Iron Big Pole Included Five Arm Bracket & Aluminium Light Fixture With 100 Watt LED Light- Without Foundation Bolts Decorative Ornamental Big Lamp-Post-Square Type Supply, installation and fixing of heritage architectural ornamental decorative light pole having provision to fix decorative brackets with aluminum light fixture. Installation of same with foundation bolts of suitable size to grout it into specially designed RCC foundation, as shown in the enclosed drawing. The decorative bracket & light shall be fixed on the top of the pole. The details of pole, brackets & light are given below: - The total height of the pole is 13500mm. First Part- A complete cast iron and M.S heavy design decorative pillar of height 2500mm with cast iron design. The base shall contain all provisions for electric arrangements .The pillar has complete structure with four numbers of Decorative round pillars. The diameter of the each pillar is 565mm.The top and bottom part of the pillars is of beautiful heritage designs of cast iron. Second Part- It is also a combination of cast iron and M.S. fabrication work. The Second Part of size 3000mmx1900mm. Second Part is fixing with the first part by bolts. At the bottom, each side is having cast iron decorative element. Third Part- Centre Bamboo- is also a combination of cast iron and M.S. fabrication work. Bottom part of the bamboo is of cone shaped diameter 800mm. center bamboo of height 5000mm with decorative ring. Fourth Part-Brackets and Lights- The overall height of this crown assembly is 3000mm. It comprises of two parts: 5 lights and 5 brackets facing downwards A classic decorative central Crown is put up on this part with height of 1360mm to give it a glorious look. The bracket size is of 1640mmx3000mm having all internal wiring arrangements for lights. And the light fittings on the bracket are made of decorative aluminum casting. The light fittings having diameter 470mm and height 520 mm. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%) Color specification & finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting process. Further parts are painted in 4 layer coating(Coating thickness-125 to 150 micron) in which first layer with epoxy primer(to prevent corrosion),second layer with epoxy base colour,than third layer polyurethane (PU) metallic paint (Gold/Green/Copper/Silver) & final layer of polyurethane (PU) lacquer (to prevent ultra violets ray). Material Specification: All this above parts made of cast iron castings must be of FG-150 grade as per IS 210 (2009) standard, Hardness must be in range between 130 BHN to180 BHN. Cast iron must have Chemical composition of Carbon -3.0% to 4.0% Silicon- 1.0% to 2.0%, magnesium -0.5% to 0.7%,sulpher -0.02% to 0.04% & phosphorous-0.07% to 0.09% this composition is best suitable for product strength & life. as per direction of engineering Inchaege. Make- Dwarka India, Gopi Intricast, R.N.L.

Supply and fixing of CCMS panel 3 phase, IP-65, CRCA Sheet Enclosure Single door, GSM IoT device, Power Supply with Antenna Group On/Off, Energy and Fault Monitoring, Incoming 63 Amp MCB, Output 63Amp MCB, SPD-20KV, 3 Phase Energy Meter, Rotary Switch for Maintenance and Bypass Operation, Subscription for dashnoard for 2 year Make : Surya, HPL, Havells, Halonix, Samarth, Dhanad, Eigen

Bidder Name

Amount

Kadam Electricals and Energy Power (GSTN-08AAQFK6692L1ZD) BID ID -2990254