8776 PROVN OF ADDITIONAL FANS AND TILING IN BLDG NOS. P167 TO P176 AND PROVN OF SOAKAGE WELL FOR DSS HANGAR WASH ROOM OF 111 HU AT AF STATION BAREILLY

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.

S&F 15mm bore dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including taking down existing unserviceable GI tubes all as specified.

All as per Item No. 3 herein before but 20mm bore dia pipes

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.

S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with dia of outlet 75mm complete all as specified.

S&F Cast iron soil, waste and vent pipes 75mm bore, sand cast in any length with or without ears, with cement joints, laid in trenches or in floors all as specified.

S&F Cast iron soil, waste and vent pipes 100mm bore, sand cast in any length with or without ears, with cement joints, fixed to walls all as specified.

S&F of 100mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.

S&F of 75mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes 75/ 100mm dia, jointed in cement mortar and taking out of trenches, if required

S&F in repairs Stop valves, 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and as directed

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F in repairs brass chromium plated grating 125mm dia with or without waste hole, all as specified.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster

M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on surfaces of ceiling finished even and smooth without using extra cement complete including brushing neat cement slurry with 3 kg of cement per sq.m. preparatory to rendering complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.

Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.

Taking down shutter of any description, size exc. 2 sq.m each.

Taking down shutter of any description, size exceeding 1 sq.m and not exceeding 2 sq.m each.

S&F second class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides all as specified

M&L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.24 (a) complete all as directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F 250mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F 100mm long cold rolled MS butt hinges medium weight.

S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified

M&L for preparation of old painted steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

M&L for treating small article such as hold fast etc area n.exc 0.1 sq.m each with tar or coal tar black paint complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 all as specified and as directed.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L 140mm length of Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing clips/ wooden beads in any size all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty/ glazing clips in any size all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified

M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

Drilling holes in cooking platform stone slab for gas pipe etc n. exc 25mm dia complete all as specified and as directed.

S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for reinforced cement concrete 1:1½:3 type A1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete all as specified.

Use and removal of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface of concrete all as specified

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs stainless steel kitchen plate rack of size 36"x31"x10", made of 1mm thick stainless steel sheet complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.

M&L for 18-20mm thick Udaipur green stone work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, laid over and including 20mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.

M&L for preparation of old decorated surfaces of ceilings by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment from the surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and cornices by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified

M&L for construction of soakage well of size 3.6m internal dia, 3.0m effective depth all as per TD drg No. CE LZ TD/576, Sheet 1/2 & 2/2 dated 16.06.1989 with excavation and earthwork in any type of soil, foundation in PCC 1:3:6 type C2, Brick work in dwarf wall in CM 1:4, brick work in CM 1:4 for solid walls, honey comb brick work in CM 1:4, RCC type B1 for cover slab, PCC type B1 for band complete all as specified and as directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.

S&F of 150 mm bore reinforced concrete pipe class NP-2 laid and jointed complete with collars in neat cement slurry complete all as specified and directed.

M&L for concrete bed to drain pipes of 150mm bore dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6, type C2 all as specified.

M&L for cutting trench in road/ hard standing (Bituminous/ concrete) 30 cm wide, up to 600mm deep, for taking the sewer lines and refilling trenches with soil/ debris and top 200mm depth with PCC type B1 complete all as directed.

S&F Ceiling fan complete with blades, white colour, with anti suicide down rod of matching colour, including all accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) complete including electric connection from ceiling rose to fan connector with PVC insulated 2 core copper cable of size 0.75 sq.mm all as specified and as directed. [Make :- Usha Model No: Usha Energia 32 1200mm/ Havells Model No: Havells Efficiencia Neo 1200mm/ Orient Model No: Orient Electric I Tome Plus 1200mm]

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 58,300.00

M/s M Aali construction co

Shikhar ji Enterprises

ZAIGHAM ENTERPRISES

Jain construction co