Construction of Civil Hospital (Additional Block) at Palampur in Tehsil Palampur, Distt. Kangra, HP (SH- Providing wiring for additional rooms in Basement-I and Min Control Panel, Sub-Panel and LED accessories in left out area therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x16 Sq. mm.

Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules(140mmx78mmx50mm)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Four Pole MCB 32 Amp Cat A

Four Pole MCB 63 Amp Cat A

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.

Single pole. 6 Amp

Single pole. 16 Amp

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

100 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

100 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-4 way

Double door-8 way

Double door-12 way

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Armoured cable 400 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Makes:- Bajaj (Ultima),C&G (Cool bridge), Panasonic(As per Panasonic cat. No. FLO GS High Speed) or any other make approved by Engineer-in-Charge.

Makes:- Bajaj, Usha, C&G, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.

Exhaust Fan, Heavy duty, 300 mm sweep

Makes:- Bajaj, Usha, C&G, Panasonic or any other approved by Engineer-in-Charge.

Providing and fixing indoor decorative aluminium extruded LED Tube fixture suitable for surface application with the use of the latest technology 20 watt (2000 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Makes:- Philips, Bajaj ,Wipro or any other make approved by Engineer-in-Charge.

Providing and fixing LED surface mounting square downlighter suitable for surface application with the use of the latest technology 15 watt (1500 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Makes:- Philips, Bajaj ,Wipro or any other make approved by Engineer-in-Charge.

Providing and fixing LED 2'X2' LED Panel suitable for surface application with the use of the latest technology 36 watt (3600 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Makes:- Philips, Bajaj ,Wipro or any other make approved by Engineer-in-Charge.

Providing and fixing LED Bulk head of following rating made of aluminium housing suitable for surface application with the use of the latest technology 10 watt (1000 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Makes:- Philips, Bajaj ,Wipro or any other make approved by Engineer-in-Charge.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 1000A 4 strip Copper Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.6 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. as required complete in all respects and panel should be Approved/Tested from CPRI Lab and should confirm IS 61439. (EVA/ DSPL or any other Approved equivalent make).

Appx. Panel Size (2000 mm (height) x 1100 mm (Wide) x 1000 mm (Deep)).

The panel shall include the following switchgears & Accessories as per the make of Schneider, L&T, Siemens, ABB etc.

Material

Outgoing:-

MCCB 630 A 4P 50 KA- 1 Nos. with 2 Nos. Spreader terminal, MCCB 400 A 4P 50 KA-1 No. with 2 Nos. Spreader terminal.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 100A 4 Strip Copper Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/ tested from CPRI lab and conforming to IS 64139. (EVA/ DSPL or any other Approved equivalent make).

The panel shall include the following switchgears & Accessories as per the make of Schneider, L&T, Siemens, ABB etc.

MATERIAL:

MAIN INCOMER :- MCCB 63/100 A 4P 25 KA with TMR O/L & S/C Protecrtion 1 No., Spreader Link 100A 4P 2 Nos.,RHOM Ext 1 No,Indicating Lamp LED type RYB- 3 Nos, Control SP MCB 6A- 3 Nos.

Basement-II MCCB 40 Amp for light Load and MCCB 100 Amp for Heating Load. Basement-I MCCB 63 Amp for light Load G.F. MCCB 63A for Light load and MCCB 100 Amp for Heating Load. F.F. MCCB 63A for Light load and MCCB 100 Amp for Heating Load.. S.F. MCCB 63A for Light loadand MCCB 100 Amp for Heating Load. . T.F. MCCB 63A for Light load

OUTGOING :

Basement-II MCB 40/63 A DP 10 kA 4/4 Nos Basement-I MCB 40 A DP 10 kA 5 Nos G.F MCB 40/63 A DP 10 kA 9/3 Nos F.F MCB 40/63 A DP 10 kA 10/4 Nos S.F MCB 40/63 A DP 10 kA 10/4 Nos T.F MCB 40 A DP 10 kA 7 Nos

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass, wooden, copper flexible door earth, legend plates etc, For Light load Incomer 63 A and 100 Amp for Heating Load.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 150A 4 Strip Copper Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved/ tested from CPRI lab and conforming to IS 64139. (EVA/ DSPL or any other Approved equivalent make).

The panel shall include the following switchgears & Accessories as per the make of Schneider, L&T, Siemens, ABB etc.

MATERIAL:

MAIN INCOMER :- MCCB 125 A 4P 25 KA with TMR O/L & S/C Protecrtion 1 No., Spreader Link 125A 4P 2 Nos.,RHOM Ext 1 No,Indicating Lamp LED type RYB- 3 Nos, Control SP MCB 6A- 3 Nos.

Basement-I MCCB 125 Amp for Heating Load T.F. MCCB 125A for Light load

OUTGOING :

Basement-II MCB 63 A DP 10 kA 5 Nos T.F MCB 63 A DP 10 kA 7 Nos

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass, wooden, copper flexible door earth, legend plates etc, For Light load Incomer 63 A and 100 Amp for Heating Load.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 200A 4 strip Copper Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.6 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. as required complete in all respects and panel should be Approved/Tested from CPRI Lab and should confirm IS 61439. (EVA/ DSPL or any other Approved equivalent make).

Appx. Panel Size (1600 mm (height) x 1850 mm (Wide) x 450 mm (Deep)).

The panel shall include the following switchgears & Accessories as per the make of Schneider, L&T, Siemens, ABB etc.

Material

Main Incomer:- MCCB 160 A 4P- 25 KA TMR with O/L & S/C & E/F protection-1No, Spreader Link 160A 4P 2 Nos.,RHOM Ext 1 No, Indicating Lamp LED type RYB- 3 Nos, Control SP MCB 6A- 3 Nos.

Outgoing:-

MCB 32 A 4P 10 KA- 5 Nos. , MCB 63 A 4P 10 KA-5 No.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Providing and fixing extra conduit down rod of 20mm dia. X 60 cm with 16/0.20 mm twin twisted flexible, cotton braided, copper cable including painting, connections etc. as required:-

Supplying and Fixing Bed Light LED solution suitable for surface application with the use for latest technology 4 Watt ( 400 lumens) and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic distortion < 10% and efftcacy > 100 lumens per watt, CRI>80. sultable for lnput voltage AC 220-240v ,50/60 HZ complete with all accesseries, including connections, testing and commissioning etc.as required complete in all respects.

Makes:- Philips, Bajaj ,Wipro or any other make approved by Engineer-in-Charge.

Supplying and fixing of following sizes PVC -U rigid pipes along with the accessories in ground; including excavation and refilling the trench etc. as required complete in all respect.

110 mm dia.

80 mm dia.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

JAMWAL ELECTRICAL WORKS