MISC REPAIR/REPLACEMENT OF B/R NATURE WORK IN VARIOUS LAB AND CLEANING OF SEWAGE LINE, DRAINS, PATHWAYS AND OTHER MISC WORKS AT RESIDENTIAL AREA AND REPAIR TO PCC FLOORING, HARDSTANDING, BRICK WORK ETC AROUND BLDG NO P-25 AND KOTHARI SC HOSTEL AT KWC

Amount

Repairs to leaking in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description by changing the washer etc, complete all as specified and directed.

S&F in repairs PVC connection 15mm dia 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.

S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.

S&F in repair 15 mm dia PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm dia bib tap cast copper alloy but fancy type chromium plated long body complete all as specified and directed.

S&F in repairs 15 mm dia bib tap chromium plated brass complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed complete all as specified and directed.

S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed.

S&F in repairs 15 mm dia angle valve chromium plated brass complete all as specified and directed.

S&F in repairs 15mm dia ball valve high pressure of PTMT complete with aluminum rod with polyplast ball complete all as specified and directed.

All as per Srl item No 10 above but 20mm dia complete all as specified and directed.

S&F in repairs 32 mm dia waste fittings brass chromium plated. complete all as specified and directed.

All as per Srl Item No 12 above but 40mm dia waste fittings brass chromium plated. complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple, tee , union etc for 15mm bore pipe (ISI Mark) complete all as specified and directed.

All as per Srl Item No 14 above but for 20mm bore pipe complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

All as per Srl Item No 16 above but 40mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphone handled level PVC bend inclduing connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repairs flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repairs PVC syphone kit with handle complete for low level flushing cistern complete all as specified and directed.

S&F in repairs CP jet spray with tube for single symphonic EWC complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm excluding CI/MS brackets complete all as specified and directed.

S&F in repairs CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.

S&F in repairs CP grating 125 mm dia round fix on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs vitreous china water closet orissa pattern 580x440mm white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe etc complete all as specified and directed

S&F in repair 9 mm plywood, grade BWR type BB fixed with screws to timber frame complete all as specified and directed.

S&F in repair vertical veniation blind consisting of alum head rail, vanes/louvers 4” wide of approved tint and traverse cord complete fixed in position complete all as specified and directed. Make: VISTA/HITECK

Easing of door/windows shutters(without taking off)of not exceeding 1 Sqm of pannels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts. Sliding bolts etc complete all as specified and directed.

All as per item No 30 above but exceeding 1 Sqm and not exceeding 2 Sqm complete all as specified and directed.

S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F in repairs aluminium sheeting 0.56 mm thick fixed to wooden shutters with CP screw including cutting to required size complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

M&L for securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rail of size 60mm long including brackets. complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F in repairs 100 mm size steel window handles, (Including welding if required) complete all as specified and directed.

S&F in repair 100 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed.

All as per item srl No 41.00 above but size 75 mm. complete all as specified and directed.

Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering/wall cladding complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for Granite stone 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 20 cmx20 cmx25 mm thick jointed and pointed in neat cement slurry in floors over & including screed bed or bedding layer of mortar 20 mm thick in CM 1:6 with gray cement and pigment. complete all as specified and directed.

S&F In repair 15 mm dia GI steel tubing medium grade galvanised with all fittingsand fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittingsand fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair rotational moulded polythelene water storage tank tripple layer (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

All as per Srl Item No 51.00 above but 1000 ltrs capacity of tank.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position. including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.

All as per Srl Item No 53 above but exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate 40 mm thick as in floors etc finishing even and smooth without using extra cement complete all as specified and directed.

-BLANK-

Dismanting of floor, hearth or wall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.

M&L for 1st quality non skid coloured tiles 400mm X 400mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 20mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

M&L glazed ceramic tiles 300x200x7mm thick coloured in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in skirtings, dado over 15mm thick plaster in CM (1:4) complete all as specified and directed.

-BLANK-

M&L for light shade coloured vitrified ceramic tiles (600x600mm size) 10 mm thick polished, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles 20mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F in repair 100 mm long aluminium handles, cast type anodised for alluminum windows complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

-BLANK-

S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with & including snap beading and gasket etc. for aluminium door & window exc .0.5 Sqm in each pane, complete all as specified and directed.

Taking down and refixing of PVC door shutter (after taking down) loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed.

M&L for racking out old joints of roof tiles including flush pointing in cement mortar (1:3) upto depth of 20 mm complete including cutting removing vegetation complete all as specified and directed.

M&L welding in repairs (thickness of metal to be welded n exc 06 mm) in any situation and in any floor complete all as specified and directed.

Repair only aluminium door shutter by taking down shutter from frame, opening out joints after taking down glass or particle board, jointing again refixing the glass pane/particle board including rubber gasket etc.

S&F in repair mortice lock, verticle type of brass complete size 100mm and 4 levers complete all as specified and directed.

S&F in repairs Viterious China urinals, bowl type(back or corner wall type) ofsize 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe. complete all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes, complete all as specified and directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM (1:4). Complete all as specified and directed.

All same as per item srl No 80.00 above but except bricks. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4). complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.

All as per item srl No 84.00 above but in CM 1:4 mixed with WPC @ 3% by weight of cement or as per manufacturer's instruction complete all as specified and directed.

M&L for preparation of newly plastered outer wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of newly plastered inner wall surfaces and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty complete all as specified and directed.

Taking down wooden or mild steel or aluminium chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F Aluminium anodized section of size 63.5x38.1x1.6mm thick as in frame for aluminium door shutter fixed to walls etc with rawl plugs and steel screws incl all cuttings etc for fixing pivot complete all as specified and directed.

S&F aluminium powder coated section swing door partly panneled and partly glazed considering top rail 86.77X44.45X1.60 mm thick bottom and lock rail 150X44.45X1.60 mm and style 47.50X44.45X1.60mm any shape including jointing clips, aluminium snap beading, rubber gasket, glazing clips, two aluminium handles 150mm per leaf, aluminium tower bolts 250 mm, one door stopper in each leaf and each side, one floor spring in each leaf dead lock of brass complete all as specefied and directed. Note: Glass and boards shall be measered and paid separetely.

S&F 12mm thick particle board exterior grade prelaminated both sides decorative of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in Square/rectangle exc 0.5 sqm each pane coloured and fixed with glazing pins and rubber beading etc in aluminium door/partion complete all as specified and directed.

S&F 30mm thick wooden flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt hasp, staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F MS Butt hinges medium wt of size 100 mm. complete all as specified and directed.

M&L for preparation of newly wooden surfaces and applying two coats synthetic enamel paint over a coat of pink primer. complete all as specified and directed.

S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized aluminium section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised aluminium snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as specified and as directed. Note: (i) Sheet glass and particle board shall be measured and paid for separately. (ii) Area of each panel shall not be exc 01 Sqm.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

-BLANK-

S&F 110 mm bore PVC (SWR) bends any radius

M&L for cleaning and greasing the sides of the rolling shutter of size n. exc 25 Sqm each as well as other moving parts, like spring,roller, wheel etc complete and shutter fully easy functional complete all as specified and directed.

M&L prepolished coloured chequred cement concrete tiles 300X300X25 mm size set in screed bed 20 mm thick in cement mortar 1:4 all as specefied and directed

M&L Cement concrete type C2 1:3:6 (40mm graded stone aggregate) as in foundations, filling and mass concrete/Subbase

M&L Plain cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in levelling of roof, complete all as specified and directed.

M&L complete removal of existing treatment and applying Water proofing treatment as under:- (A) Applying a coat of approved bituminious primer @0.20 Kg/Sqm and applying a coat of hot blown bitumen 85/25 @1.20 Kg/Sqm. (B):- applying APP Polymer modified membrane 3.00 mm thick and not less than3.50 Kg /Sqm with side end lap by torch application method as specefied.(C):-Applying one coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specefied and directed

M&L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubing down concrete surfaces with wire brushes cleaning with water allow to dry and applying a layer of Zinc rich epoxy primer as an antirust on all exposed reinforcement followed by a layer of binding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited and applying two layers of guniting over steel welded mesh 2 mm dia of wire and aperture 75 mm, total thickness of guniting not exc 40 mm (Avg thickness) in Cement mortar 1:2 using OPC 53 grade cement mixed with polycreate mixture @2% by weight of cement or as per manufacturer's instructions and finally applying cement plaster over guniting surface of requred thickness to give even, unirorm and smooth finishes confirming to proper geomtrics in cement mortar 1:3 to match the existing surfaces as in sides ,soffits of the slabs,chajja,fins,facia ,parapets,lintels,columns and beams etc complete including necessary scafolding, shuttering, chasing to brick work or RCC members at any hieght up to 06 storied buildings including removal of all small trees/shurbs etc complete all as specified and directed. Note : Expended metal shall be meaured and paid seperately.

M&L for expanded metal cut to length bent to shape reuired and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing wih galvanised steel staples suplied and fixed to wood or steel members complete all as specified and directed.

S&F in repair of stainless steel(grade-304) hollow tube sections,chennels,plates,angles etc of any size and sections as approved in railing,balusters,posts,newel posts,running rails,middlle rails, chains etc including necessary welding reveting, bolting, grinding, buffering, polishing and making curvature(whereevver requred) all as specefied and directed

S&F tensile fabric sheet 650 GSM to 950 GSM thick fixed with coach screw and washer in roof wall etc complete all as specified and directed. Make: Serge Ferrari/Mehlar.

M&L for removal of blockage and cleaning of manhole of existing sewer line of internal dia 100/150/200 mm manually including removal of taken out material outside defence land distance n.exc. 5KM including refixing of cover complete all as specified and as directed.

M&L for removal of blockage and cleaning the floor trap, gully trap, bottle trap, in kitchen, lobby, bath room, toilets at any height of floor (Maximum G+9 Floor) including pipe line up to the first manhole complete all as specified and as directed

M&L for cleaning and removal of blockage in IWC/EWC/Urinal pots at any height of floor (Maximum G+9 Floor) including pipe line up to the first manhole complete all as specified and as directed

Notes for ser item 112 to 114 :- 1. Rate also includes for necesary tools and plants which is required for execution of item i.e cleaning rod, buckets, bamboos sticks, Kashi etc. 2. Contractor's rep will be required to report to complaint cell (KWC Area) to collect the machine numbered complaint slip from concrened JE from 0900 hrs to 1700 hrs on all working days but on demand for Sundays, Holidays, additional working hours also, the contractor shall provide manpowers alongwith T&P required for execution of work as per numbers of complaints, additional Sweeper/Helper shall also be provided by the contractor if required but no additional claim on this account shall be admissible as the payment is to be made as per unit rate quoted.

3. After handover the complaint to contractor/contractor's rep, in case of absence of the Safaiwala with tools at Complaint Cell on any working day or on the particular day for which demanded, and failed to complete the complaint with in 24 hours a penalty of Rs 500/- per complaint shall be effected from the dues of the Contractor . 4. Necessary complaint register and printed complaint slip as per specimen given by the Engineer-in-Charge shall also be arranged/provided by Contractor. On receipt of complaint, concerned JE fill the slip and handover it to Contractor/Contractor Rep who will re-submit it to JE after attending complaint duly signed by Rep of user with satisfactory completion of complaint by user and keep it in safe custory for payment purpose.

Removal of blockage in between two manholes spacing upto 18 meters of underground sewage line of any type and size upto 200 mm dia by means of mechanicals rodding with vibrations/drilling concept. A trolley mounted motorized sewer cleaning machine for the execution of item shall have to be provided by the contractor. Blocked material, sludge obtained during execution of this item shall be removed from the site through trolly mounted motor out of defence land. Sewage line between existing two manholes shall be flushed with combined high pressure water jetting cum suction (vaccum type machine suitably mounted on HCV having facilities of hydraulic applications with suitable size of nozzle pipes. Item shall be executed by the contractor upto satisfaction of the Engineer-in-Charge. No extra claim, whatsoever shall be entertained at any stage. Quoted rate shall be deemed to include all aspects mentioned herein.

Excavation in trenches in hard / dense soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep and getting out complete all as specified and directed.

M&L for salt glazed stone ware pipe grade ‘A’ 150 mm internal dia including laying and jointing with cement joints including demolition and breaking up existing unserviceable SGSW pipe and removal of debris complete all as specified and directed

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed

M&L for salt glazed stone ware pipe grade ‘A’ 200 mm internal dia including laying and jointing with cement joints including demolition and breaking up existing unserviceable SGSW pipe and removal of debris complete all as specified and directed

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in concrete bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 200 mm internal dia after they are laid and tested complete all as specified and directed

M&L for salt glazed stone ware pipe grade ‘A’ 300 mm internal dia including laying and jointing with cement joints including demolition and breaking up existing unserviceable SGSW pipe and removal of debris complete all as specified and directed

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in concrete bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 300 mm internal dia after they are laid and tested complete all as specified and directed

S&F in repair 150mm internal dia PVC (SWR) pipes single socketed in any length with rubber ring joint, fixed to walls with fittings and clamps including dismantling old unserviceable pipe complete all as specified and directed.

S&F in repair 110mm internal dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall with MS clamps old unserviceable down pipes complete all as specified and directed. Make: Prince/Finolex.

S&F PVC (SWR) bends any radius 110/150mmmm dia including taking down complete all as specified and directed

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed

S&F PVC (SWR) 'P’ trap 110mm bore complete all as specified and directed

Returning, filling in hard/dense loose soil including spreading, leveling, watering and well ramming in layers n.exc. 25 cm complete all as specified and as directed

Removing excavated material to a distance exceeding 1.5 KM and not exceeding 5 KM depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

Cutting into existing manhole for connecting new drain pipe of 150mm bore SGSW pipe including making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete (1:2:4) type B-1 smooth finished complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching for manholes and haunching around manholes frame for setting, coping, holdfast fixing etc including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed

Supply only integral water proofing compound/liquid etc complete all as specified and directed

Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness complete all as specified and directed. Make: SS/Uttam.

M&L for RCC work (Nominal Mix) (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note : Reinforcement shall be measured & paid seperately

M&L for TMT bars of 10mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works (horizontal or sloping) complete all as specified and as directed.

S&F concrete paving tiles with polish & coatings 20mm thick set jointed and pointed in neat cement slurry using pigmnets laid over 20 mm thick screed bed in CM 1:6 all as specified and directed.

S&F factory made PU moulded polished with coating material concrete interlocking paver block with grey cement and pigment, any shape and size, 60mm thickness, M-35 grade complete all as specified and directed.

M&L for cushioning of sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for cement concrete (1:4:8), type D2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed.

M&L for PCC 50mm thick (1:4:8), type D2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base of floor complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply & fixing framed work such door, grill railing, cattle trap on open drains using mild steel angle iron, MS flats of sizes as directed with and including provision of MS hinges and MS Hold fast fixed complete all as specified and as directed.

M&L for preparation of newly steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F grating doom of size 100/125/140 mm CP in round or square shape for out let of water etc complete all as specified and directed

Desilting and cleaning of open drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of excavated materials to a distance outside MoD premises complete all as specified and directed.

All as per ser item No 147.00 above but covered as under culverts cover slabs with hume pipe etc complete all as specified and directed

-BLANK-

M&L for cement concrete type C-1 1:3:6 (20mm graded stone aggregate) as in plinth courses, copings, parapets, saucers drain, kneelers, apex stones, bed plates, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L 75mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) then provide 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) finished the surface even & fair complete all as specified and directed.

Renewing cement concrete tiles in patches, area n. exc. 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete

All same as per Srl item No 139.00 above but except paver block.

Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for preparation of new external plaster surfaces and applying two coat of Exterior acrylic paint (weather proof / dust proof) over and including a coat of primer complete all as specified and as directed.

M&L for forming contraction (dummy) joint 30mmx10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

JM enterprises

V.V CONSTRUCTIONS

boon construction company

LR Mendiratta and Sons

m/s Kailash Chander