C/O Working Women Hostel (Sakhi Niwas) under scheme for Special Assistance (SASCI ), Directorate of Women and Child Development H.P for COA for internship/Higher studies at CSKHPKV, Palampur (SH Providing and fixing Electrical Insatallation work)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Wires of Havells/KEI/ Plaza/Polycab and accessories of Anchor Penta make) Group B.

Wiring for twin control light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Wires of Havells/KEI/ Plaza/Polycab and accessories of Anchor Penta make)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Wires of Havells/KEI/ Plaza/Polycab and PVC conduit D-plast/ Anchor/ Precision make)

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Wires of Havells/KEI/ Plaza/Polycab make)

3 x 1.5 sq. mm

5 x 1.5 sq. mm

3 x 2.5 sq. mm

5 x 2.5 sq. mm

3 x 4 sq. mm

5 x 4 sq. mm

3 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (D-plast/ Anchor/ Precision make)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Anchor Penta make)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Anchor Penta make)

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (Anchor Penta make)

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (Anchor Penta make)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. (Anchor make)

Supplying and fixing PVC batten/ angle holder including connection etc. as required. (Anchor make)

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. (Anchor/Havells make)

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Havells/Lauritz Knudsen/Indo Asian make)

100 A, 16 KA,TPMCCB

125 A, 16 KA,TPMCCB

160 A, 16 KA, TPMCCB

200 A 36 KA,FPMCCB

250 A 50 KA, FPMCCB

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Havells/Lauritz Knudsen/Indo Asian make)

8 way, Double door

12 way, Double door

16 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Havells/Lauritz Knudsen/Indo Asian make) Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Havells/Lauritz Knudsen/Indo Asian make) 63 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Havells/Lauritz Knudsen/Indo Asian make) 63 amps

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required of the required size:- (Havells/KEI/Polycab/Plaza make)

Armoured cable 6 sq. mm (twin core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 95 sq. mm (3.5 core)

Armoured cable 150 sq. mm (3.5 core)

SITC of stationary storage type Electric water heater (Geyser) of various sizes, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No PVC. connection pipes making good the damages, electrical connections, safety valve connections etc. as required:- (Havells/racold/crompton make)

25 Litres Geyser

35 Litres Geyser

SITC of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. (Havells/crompton make)

1200mm Ceiling Fan

1400mm Ceiling Fan

SITC of exhaust fan of following size in the existing opening, including making good the damage, connection etc. as required. (Havells/crompton make)

Exhaust Fan, Light duty, (Domestic) 250 mm sweep

Exhaust Fan, Heavy duty, 380 mm sweep

SITC of LED surface mounted Batten light of following body material as per IS : 10322 complete with driver and accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Havells/crompton/orient make)

10W LED Batten, Polycarbonate Body, fitting, 30 cm

30W LED Batten, Polycarbonate Body, fitting, 110 cm

SITC of LED Panel light 2x2 ft. surface mounted, as per IS : 10322 with driver and accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Havells/crompton/orient make) 30W, 2x2 LED Surface Light Panel Downlight

SITC of LED Recessed Down lighter (Round/ square/ Rectangular shaped), as per IS : 10322 with driver and accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Havells/crompton/orient make) 5W Junction Box Downlight

SITC of Wall fan of following size on wall complete with accessories, including connection etc. as required. (Havells/crompton make) Wall fan 400mm

SITC of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement (Havells/crompton/orient make) LED Flood Light, Aluminium Die cast Body 100W

SITC of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement (Havells/crompton/orient make) LED Street Light, Aluminium Die cast Body 50W

Supplying & fixing all weather outdoor box of suitable size including connection, painting etc. as required. (Sintex/Precision make) 130 X 80 X 65mm All weather box

Supplying and Erection of steel tubular pole of following size, as per IS:2713, strut in hume pipe to be filled with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling, etc. as required.

8 meter Steel Tubular pole

9 meter Steel Tubular pole

Supplying and drawing following sizes of PVC insulated aluminium conductor, two core cable in the existing surface/ recessed steel/ PVC conduit as required. PVC Insulated Aluminium Twin Flat 6sqmm

Supplying and fixing copper strip bus-bars suitable for 400 Amp. 415 volts capacity 4 No. each of cross-sectional area (38.10mmx6.35mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:-

SITC of cubical panel, indoor/outdoor type floor/wall mounted free standing totally enclosed, extendable, IP 42, of following capacity for 3 phase, 415 V + 10 %, 50 Hz AC System for Ambient temperature -5°C to +40°C, fabricated in compartmentalised designed made of CRCA sheet steel of 2.0mm thick for framework & covers, 3 mm thick for gland plate i/c cleaning & finishing complete with 9 tank process for powder coated of approved shade ( RAL 7032-Siemens gray or as approved by Engineer-in-Charge), having front section (switch gear and control accessories)fabrication shall be done in transportable section, entire panel shall have common copper earth bar of minimum size of 25mm x 5mm with 2 nos. earth studs, the earth terminals provided on the body, forced ventilation for maintaining temperature rise not more than 5°C from ambient Panel shall be in compliance with IS :14772 & CPWD Specifications etc. Separate space for Incomer/Outgjngs of Suitable capacity Changeover/MCCB/MCBs base , ON, OFF, Trip, R, Y, B - LED Indicating Lamp set alongwith required accessories with extended rotary handel and door interlocking arrangment. Digital Multi function meter with LED Display for V, A with Suitable rating CT shall be provided for control and indication circuit. All components like CT, meter, relay and indicating lamp shall be protected by using suitable rating individual MCB's. Wiring of the control circuit shall be done by using 2.5 sq mm, FRLS/HFFR 1100 V grade, PVC insulated multi stranded copper control wire.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc including excavation and refilling etc. as required.

Supplying and erection of shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

Supplying and Erection of G.I. Wire No. 8 SWG including binding etc. as required.

Supplying and erection of all aluminium conductor of following size diameter including binding etc. as required.

AAAC 7/3.15mm (Rabbit)

ACSR 6/1/4.72 mm (Dog)

Sulpying and Erection of pvc spiral type LT line spacer as required.