SPECIAL REPAIR OF BUILDING NO. P-9 AND 05 BATHROOMS AND SPECIAL REPAIR TO SEWAGE LINE CONNECTING ITEMS AT NHO, DEHRADUN

Amount

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) not exc 1.5 sqm, complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, with frame side hung type or sliding type with sash bars, aluminium sections weighing 0.55 kg/m including 4mm thick glass and aluminium Grill with necessary, galzing clip, rubber packing with and including following fittings such as peg stays 150mm long (1 no.),hinges type B-21, 100mm long (2no.), suitable handle (01 no.), complete all as specified and as directed.

M & L 15mm thick rendering on brick work surfaces mixed with water proofing compound (liquid) as per manufacture instruction, finish the surface even and fair without using extra cement in CM 1:4 including taking down cement plaster on bricks or concrete surface of any description including racking out joints hacking for key scrubbing down with water complete all as specified and as directed. Note :- WPC will be measured and paid separately.

Supply only liquid water proofing compound of Dr fixit, complete all as specified and as directed.

M & L 15 mm thick rendering on brick work surfaces finish the surface even and fair without using extra cement in CM 1:6 including taking down of old plaster complete all as specified.

M&L for preparation of newly plastered wall surface and applying 2mm thick wall care putty and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of complete removal of existing treatment over wall surface and applying 2mm thick wall care putty and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L two coats of weather proof emulsion paint Apex in newly plastered surface over a coat of primer including preparing the surface with 2mm thick wall putty, complete all as specified and as directed.

M&L preperation of old painted plastered surfaces of any description including scraping, brushing, brooming down and repair surface with wall putty and applying two coat of exterior emulsion paint (Apex) any tint / shade over a coat of primer of asian paint or other equivelent as approved complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:4 and complete all as specified including Dismantling floor, hearth including bedding (but not backing) rubbish off the premises complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 300x450x7 mm thick on walls set and jointed in neat cement slurry and pointed in white or colosured cement to match the shade of tile including 10mm thick rendering in CM 1:4 finish surface rough to recieve tile including Dismantling floor, hearth or wall tiling including bedding (but not backing) rubbish off the premises complete all as specified and directed. and complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including removal all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including removal all as specified and directed.

S& F steel tubes medium grade in any size or length galvanised with all fittings and fixed complete to wall and ceiling or laid in floor , bore of pipe 15 mm dia including making hole in RCC slabs for vertical pipes and making good all as specified and directed.

S& F steel tubes medium grade in any size or length galvanised with all fittings and fixed complete to wall and ceiling or laid in floor , bore of pipe 20 mm dia including making hole in RCC slabs for vertical pipes and making good all as specified and directed.

S&F in repair vitrous china wash basin half pedestal size 505x605x475 mm white dlat back size excluding tap but including bracket complete all as specified and directed. Jaquar cat part No-FNS-WHT-0606 or equivalent in parryware or cera approved make, complete all as specified and as directed.

S&F bottle trap (with internal partition ) 32 mm dia size with 250 mm and 190 mm long wall connection pipe and wall flange make Jaquar cat part No-ALD-76L250 X 190 or equivalent in approved make, complete all as specified and as directed.

S & F in repair soap dish, brass, chromium plated,100X100X60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed.

S&F in repair 20 mm dia brass CP tubular towel rail D type 60 cm long, complete all as specified and directed.

S & F in repair acreylic glass corner shelf with CP brass railing size not less than 300 mm long and fix to wall with rawl plug and CP screws complete all as specified and directed.

S & F in repairs 15 mm dia brass chromium plated stop cock chromium plated concealed type with wall flange complete in all respect as specified. Marc Cat part No-MBR-1040,Hindware cat part No-F1000051QT and parryware equevalent, complete all as specified and directed.

S&F in repairs PVC (SWR) pipe 110mm dia single socket in any length with rubber gasket cup washing ,jointed laying in trenches or floor including dismantling complete all as specified and directed.

S&F in repair PVC (SWR) bends of 110mm dia one end fixed to pipes and another end fixed to pipes with solvant complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) junction single, (Single T) with oval access door equal or unequal fixed to pipe with solvant cement, complete all as specified and directed.

S&F in repairs PVC (SWR) pipe 75mm dia single socket in any length with rubber gasket cup washing ,jointed fixed to wall including dismantling all as directed.

S&F in repairs PVC (SWR) pipe 75mm dia single socket in any length with rubber gasket cup washing ,jointed laying in trenches complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) bends with oval access door of 75mm bore one end fixed to pipes with solvant complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) junction single, (Single T) with oval access door equal or unequal fixed to pipe with solvant cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 110/75 mm bore PVC (SWR) reducers larger bore to be measured fixed in pipe complete all as specified and directed.

S&F 100 mm bore Cast Iron ‘P’ trap complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let, complete all as specified and directed.

S&F in rapair 10 Ltrs capacity PVC low level flushing cistern with inlet foat valve,handle ,including brackets,PVC bend of approved make all as specified and directed.

S&F in repair Vitreous china white half stall urinal of size 345 x 320 x 610mm top inlet fix with necessary brackets including 32mm dia CP waste coupling complet all as specified and directed. Make Jaquar URS-WHT-13257 or equivalent

S&F C.P towel Ring 200mm dia round with round flange complete all as specified and directed. Make Jaquar cat part No. ACCN-1121BN or equivalent in approved make.

S&F Toilet paper holder stainless steel flap fixed to wall etc complete all as specified directed. Make-Jaquar cat part no. CAN-1153S or equivalent

S&F hand shower (Health faucet) with 8mm dia 1.20 meter long flexible tube & wall hook with NRV including fixing bracket complete all as epcfied and directed. Make Jaquar Cat No. ALD-577 or equivalent in approved make, complete all as specified and as directed.

S&F in repair 100mm squar CP greating fixed with coloured cement joint to match the existing surface of tile, complete all as specified and as directed.

S&F in reapairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S & F in repair 15 mm dia CP Bib tap fancy type with capstan head fix in 15mm bore GI pipe complete all as specified and directed..

S & F in repairs angle valve brass CP 15 mm bore fancy type screwed ends for iron pipe incl flange complete all as specified and directed.Make - Hind ware , Jaquar

S & F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with the prelam sheet reinforced with MS square tube supply & fixing in opening incl necessary fixing arrangements as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a VC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2004)(make Raj shree or equivalent )

S&F MS Butt Hinge 100mm long medium weight cold rolled, complete all as specified and as directed.

S & F Extruded brass handles, fabricated type polished 150mm long of fixed to door shutter complete all as specified.

S &F Brass extruded type 150 mm long barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

S&F 10 mm thick sheet toughen glass ordinary quality as in partion between urinal in square exc 0.50 sqm in each pane all as specified and directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level), (reinforcement cut as required to facilitate demolition) complete all as specified and directed

Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level), (reinforcement cut as required to facilitate demolition) including scraping and cleaning of reinforcement,complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all specified and directed

Excavation in trenches n exc 1.5 M deep & n exc 1.5 M wide and n exc 10 sqm on plan, in any type of soil and getting out complete all as specifed and directed.

Ditto- but exc 1.5 m & n exc 3m deep and getting out in any type of soil, complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling and mass concrete complete all as specified & directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for PCC 1:2:4 type B 1, using 20 mm graded stone aggregate as surface channels and drains incl fair finishing complete all as specifed and directed

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) finished even and smooth without using extra cement as in copings including necessary formwork etc complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement,including form, moulds, mitred/ stopped ends etc complete all as specified & directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore of pipe complete all as specified & directed.

M&L for RCC pipes, class NP3, laid in trenches & jointed as specfified for 200 mm bore of pipe including collars complete all as specifed and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300 mm bore of pipe complete all as specified & directed.

M&L for RCC pipes, class NP3, laid in trenches & jointed as specfified for 300 mm bore of pipe including collars complete all as specifed and directed.

M & L for precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in landings, cover slabs (for manholes) etc.) and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specifed and directed.

M & L for mild steel round bars Fe-410-W (Gde E-250) quality-A or Fe 290 (Gde-E-165) 10 mm dia and over in rungs, MH cover handles etc.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M & L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in any type of soil complete all as specifed and directed

Removing surplus excavated soil to a distance exc 250 M but n.exc 500 Mt & depositing where directed complete all as directed at site.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm internal dia of pipe complete all as specifed and directed

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 300 mm internal dia of pipe complete all as specifed and directed

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base,complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (12.5 mm graded aggregate) 25 mm thick as in floors finished fair and even to receive other floor finish,complete all as specified and directed.

M&L for chequered cement concrete tiles with gray cement and no pigment 20cmX 20cmX25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, over 15 mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block as in road berm any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with no pigments over and including 50mm thick sand cushioning complete all as specified and directed.

Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes, 75/ 100 mm dia jointed in neat cement mortar and taking out of trenches or floor or wall if required.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid trenches or in floor complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or un equal 110mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F PVC (SWR) bend 75 mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or un equal 75 mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed.

S & F PVC (SWR) vent cowl 100 mm dia, complete all as specified and as directed.

S&F in repair vitreous china white wash down couple closet of size 800 x 365 x 650mm including PVC soft seat cover white complete all as specified make: Jaquar cat part No. ARS-WHT-0313 equivalent in parryware or cera make, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (padestal pattern) white (excluding flushing cisterns and flush pipe) complete all as specified and as directed. MAKE-Jaquar, hindware, parryware

S & F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete in all respect as specified Make- Jaquar, hindware, parry ware

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed stranded copper conductor cable single core 1100 volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface, including all necessary modular accessarries like metallic flush box, white cover plate with frame etc and 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable as earth wire connected with main common earth dolly including complete all as specified and directed for the following :- (a) One light/fan/bell point controlled by one, one way Modular switch complete all as specified and directed

b) One 3 pin/ 5 pin 5 AMP socket out let on same board controlled by one, one way Modular switch complete all as specified and directed.

c) One 3 pin/ 5 pin 5 AMP socket out let on independent board controlled by one, one way Modular switch complete all as specified and directed.

S&F Modular switch single pole, 5/6 AMP 240 volts AC complete all as specified and directed make:- Legrand, Havells, C&S

Supply and fix socket out-let modular with safety shutter 5/6 Amp, 5 pin complete all as specified and directed. make:- Legrand, Havells, C&S

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals all as specified, make:- Legrand, Havells, C&S

S & F LED tubelight 20 watt with integrated driver, polycarbonate diffuser & aluminum housing complete all as specified and directed, Make :- Havells, C&S

S & F in replacement LED downlighter 6 Watt slim fit round profile for ceiling cut out dia 105mm complete all as specified and directed. Make :- Havells, C&S

S & F fresh air fan 250 mm sweep PVC body complete all as specified and directed. make:- Legrand, Havells, C&S, Cromption

M/s RK ENTERPRISES

M/s Teg Singh Negi

M/S Manmohan Singh Anand