Patch Repair Work on different roads in Milak Assembly Area.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the material with water at OMC in mechanical mix (Plant), carriage of mixed material by tipper to site laying in uniform layers With grader in sub-base/base course on well prepared under base and compacting with vibratory-roller to achieve the desired density. Laying using grader

Providing and laying Dense Graded Bituminous Macadam with 100-120 TPH producing an average output of 75 Tonnes per hour using crust aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and laying bituminous concrete with 100-120 TPH producing an average output of 75 Tonnes per hour using crust aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40 to 5.60 % of mix and filler, transporting the hot mix to work site, laying with a hydro static paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification Clause No. 509 complete in all respects (509) including all material, labour, cess, T&P, machinery, and all taxes etc. complete direction by E-I/c.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 to required line, grade and level to serve as wearing course on a previously prepared base by manual means, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508 (By Manual Means)

Providing and laying Type "C" seal coat by manual means with VG-10 sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall as per Technical Specification Clause 510 ( By Manual Means)

Providing and applying tack coat with VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer/Bituminous surface as per Technical Specification Clause 503.

Supply and Laying of Empty Cement Bags filled with local sand as per s.i. no. new item 1 chapter 19

Providing a JCB Machine including driver and POL extra proper completion of the work as per Engineer-in-Charge.

Spreading and laying BC/PC manually of Premix material supplied by departmental HMP including cleaning, lineing etc also including labour for tack coat (Labour Rates Only)

Providing a Tractor with Trolly including driver and POL extra proper completion of the work as per Engineer-in-Charge.