Laying power cable, installation of Earthing pit and mounting of Panel Fans at VECC.

Amount

LT Power cables: Supply, testing at manufacturer works of 1.1 KV grade 3.5C x 300 Sq.mm aluminium stranded sector shape core conductor with XLPE insulation, cable conforming to IS 7098 Part-I with latest amendments as per Technical specifications in clause no. 3 of PART-E. And laying/ fixing of the same cable on

wall/column/slab/false ceiling / existing cable tray/trench/ shaft/pit etc. with all fixing accessories, providing cable tag etc. testing and commissioning at site as per instructions of the Engineer In charge of the work.

Underground at a depth of 750 mm from ground level with sand and bricks protection.

L T Cable End Joints: Supplying and making end termination with double compression brass cable glands and aluminium lugs for 3.5C x 300 Sq.mm of XLPE aluminium conductor cable of 1.1 KV grade by crimping with supply of all jointing materials, insulation tape, flux and duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per enclosed detailed specifications, as per instructions of the Engineer In charge of the work.

Supply and installation of GI flat strip, 50mmX6mm on surface to connect earth pit with existing earthing system.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 1.1 KV grade 3.5C x 185 Sq.mm aluminium stranded sector shape core conductor with XLPE

Earthing Pits: Supply, installation, testing and commissioning of plate type Earthing System as per enclosed detailed specifications in clause no. 3 of PART-E and as per instructions of the Engineer In charge of the work.

Supply, installation of heavy duty Panel mounting exhaust fan 200mm sweep, 230Volt, 50Hz Ac supply. The work includes cutting of MS panels to appropriate size and fixing of Exhaust fan with the MS panel sheet with appropriate fixing clamps, Nuts and bolts, filters (louvre) to avoid ingression of dust particles into the Panels, installation of a DP MCB, C- curve of 02Amp, wiring of the fan with 1.5sq.mm copper flexible FRLS wire from the supply source to Exhaust fan and or as directed by the Engineer-In Charge (EIC) of the work.

Supply, installation of heavy duty Panel mounting exhaust fan 150mm sweep, 230Volt, 50Hz Ac supply. The work includes cutting of MS panels to appropriate size and fixing of Exhaust fan with the MS panel sheet with appropriate fixing clamps, Nuts and bolts, filters (Louvre) to avoid ingression of dust particles into the Panels, installation of a DP MCB, C- curve of 02Amp, wiring of the fan with 1.5 sq.mm copper flexible FRLS wire from the supply source to Exhaust fan and or as directed by the Engineer-In Charge (EIC) of the work.

Supply, installation of heavy duty Panel mounting exhaust fan 200mm sweep, 230Volt, 50Hz Ac supply. The work includes disconnection from power supply and removal of old exhaust fan and refixing of the supplied new exhaust fan with appropriate fixing clamps, Nuts and bolts, filters (Louvre) to avoid ingression of dust particles into the Panels and or as directed by the Engineer-In Charge (EIC) of the work.

Supply, installation of heavy duty Panel mounting exhaust fan 150mm sweep, 230Volt, 50Hz Ac supply. The work includes disconnection from power supply and removal of old exhaust fan and refixing of the supplied new exhaust fan with appropriate fixing clamps, Nuts and bolts, filters (Louvre) to avoid ingression of dust particles into the Panels and or as directed by the Engineer-In Charge (EIC) of the work.

Supply, installation of heavy duty Panel mounting exhaust fan 100mm sweep, 230Volt, 50Hz Ac supply. The work includes disconnection from power supply and removal of old exhaust fan and refixing of th supplied new exhaust fan with appropriate fixing clamps, Nuts and bolts, filters to avoid ingression of dust particles into the Panels and or as directed by the Engineer-In Charge (EIC) of the work.

Supply, installation 12watt LED lamp, 6500K, 1200Lumen and straight batten brass holder of B22 cap, in bollard lamp set. Dismanling from its post and fitting of straight batten brass holder (B22) in Aluminum strip, fixing in the existing Bollard lamp fitting and putting the lamp in bollard lamp fitting, connection to the lamp and refixing of the Bollard lamp fitting in the post is under the scope of the contractors and will be carried out as per instruction of EIC.

Supply, laying on surface of wall with shaddles/china clips etc. of 1.5sq.mm, 3 core, FRLS insulated, PVC sheathed, 1100Volt grade flexible cable. The work includes end termination with suitable type thimbles/pin type sockets or as directed by the Engineer-Incharge of the work.

Shahi Electric Engineering Co. Pvt. Ltd.

GEETALI ENGINEERING SERVICES

SHIKHA ENTERPRISE