SPECIAL REPAIR TO CERTAIN MARRIED ACCOMMODATION AT AF I STATION JAMNAGAR

Amount

Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level, including removal of debries to outside MOD land.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land

M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) of size 300 mm x 450 mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for outdoor coloured vitrified paving tiles, joint free (edge cut) of size 300 mm x 300 mm x 08 to 10 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M & L for 15 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete.

M&L machine cut kota stone slab flooring 18 - 20 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including 20 to 22 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in -Charge. Note:- Overall thickness of kota stone with screed bed shall not be lss than 40 mm.

All as per item No 10 above but in vertical surface such as dado / skirting over 10 mm thick backing coat in CM 1:4. complete all as specified.

M&L for green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15 mm thick screed bed in CM 1:6 complete.

Labour only for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation.

Demolition of PCC Paver block of any description laid bedded dry from path / hardstanding including removal of dry sand screed bed all as specified and directed.

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer chemical coating on top surface, with white cement and pigment all as specified and directed by Engr-in- Charge

M&L for Filling of dry Sand as in screed bed for PCC interlocking paver block including spreading leveling, and well ramming complete all as specified & directed by Engr in Charge

M&L for plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate, as in sub base to floors and paving etc all complete & as directed by Engr In Charge.

M&L 100 mm thick plain cement concrete 1:2:4 type B2, using 40 mm graded stone aggregate, as in paving / hard standing finished even and smooth without using extra cement and spike rolling to surface or making impression of expanded matle when the concrete is green etc all complete & as directed by Engr In Charge.

M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:1 by weight complete all as directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to including removal of debries to outside MOD land all specified and directed by Engr in Charge

M&L for rendering 15 mm thick on PCC block masonry wall surface in cement mortar 1:6, finished even and smooth without using extra cement all as specified and directed by Engr In charge

M&L for rendering 15 mm thick on PCC block masonry wall surface in cement mortar 1:4, finished even and smooth without using extra cement all as specified and directed by Engr in Charge

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement.

M&L for preparation of new plastered surfaces of walls & applying two coat of Distemper oil emulsion over a coat of primer over and including cement base wall care Putty on wall surfaces complete.

M&L for preparation of new plastered surface of wall and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old decorated surfaces of ceiling by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash all as specified and directed.

M&L for preparation of old distempered / decorated surfaces of walls including washing, rubbing down, stopping, brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of distemper oil emulsion complete all as specified and directed by Engr In Charge

M&L preparation of old painted surface of wall by brooming down, scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water and applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified.

Taking down choukhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but n.exc. 2 Sqm each complete all as directed by Engineer-In-Charge.

Resecuring or easing & adjusting without taking down the shutter of any description exc 1 Sqm but n.exc 2 Sqm in same opening complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long (3 Nos in Each Shutter), Aluminium tower bolt 100 mm long (2 Nos in Each Shutter) and Aluminium handle 150 mm long (2 Nos in Each shutter) ( as per specification and drawing complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS tube supplying and fixing in opening as per specification and drawing in SSR Part-II.

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed by Engineer-In-Charge.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed.

S&F 35 mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats complete.

S&F 25 mm thick cupboard flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed.

S&F 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lipping on edge complete.

Supply & paste 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wiregauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. mention in Appx B

(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make

S&F aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete. Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

S&F 100 mm size mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.

S&F 75 mm size mild steel steel butt hinges medium weight, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.

S & F 200 mm long aluminium anodised barrel tower bolt all as specified and as directed by Engineer-In-Charge.

S&F 150 mm long aluminium handle fabricated type anodised all as specified and as directed by Engineer-In-Charge.

S&F 250 mm size mild steel sliding door bolt plate type stove enameled black with bright bolt not less tham 12 mm dia with adn including minimum 6 bolts and nuts, four on bolt plate and 2 on staple plate complete.

S&F Hasp and staple 100 mm size of aluminium anodised including bolt to hinge plate and fixed with screws

S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repairs 50 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr In Charge

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed by Engineer-In-Charge.

M&L for preparation of new wooden surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed by Engineer-In-Charge.

S&F Mild steel flat iron as in hold fast and similar work fixed to chowkhat complete all as specified and as directed by Engineer-In-Charge.

M&L for Preparing surfaces of wooden ends of posts, backs of chowkats, etc., and and treated with tar or coal tar black paint, area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete.

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. area n exc 0.1 sq. m each with tar or coal tar black paint complete.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to wooden shutters complete.

S&F in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position, including necessary bracket and decorative end caps for each curtain rod complete all as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 25 mm bore steel tubing and connections, complete all as specified and as directed

Supply and fixing 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.

Fixing only 15 mm bore galvanised steel water tubing, retrived from BOQ item No 63 above complete and connecting to water supply pipe line including concealed in wall all as specified.

Supply and fixing 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.

Fixing only 20 mm bore galvanised steel water tubing, retrived from BOQ item No 64 above complete and connecting to water supply pipe line including concealed in wall all as specified.

Note For Item No 66 to 69: Cutting chease will be measured & paid separately.

Supply and fixing 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified.

Fixing only 25 mm bore galvanised steel water tubing, retrived from BOQ item No 65 above complete and connecting to water supply pipe line complete.

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete.

S&F in repair 15 mm size long body bib tap with wall flange, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule complete. Make: Prayag cat part PIS-08 or equivalent of make mentioned in Appx B

S&F in repair 15 mm size short body bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete. Make:-Prayag cat part PIS-06 or equivalent of make mentioned in Appx B

S&F S&F in repair 15 mm size Angle Cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete. Make: Prayag cat part PIS-10 equivalent of make mentioned in Appx B

S&F in repair 15 mm size concealed stop cock with wall Flange all as specified and directed. Make:- Prayag cat part PIS-28 equivalent of make mentioned in Appx B

S&F in repairs brass chromium plated shower rose 100 mm size with arms and flanges inlet complete. Make:- Prayag cat part BS-73 equivalent of make mentioned in Appx B

S&F in repairs brass chromium plated towel rail 600mm long 20 mm dia D type all as specified and directed.

S&F in repairs corner glass self including bracket etc. Complete all as specified and directed. Make : Prayag cat part No. BEA-46 or equivalent of make mentioned in Appx B

S&F in repairs stainless steel soap dish holder complete all as specified and directed.

S&F in repair brass chromium plated towel ring, fixed in position all as specified and as directed by Engineer-in-Charge. Make: prayag Cat No. BA-41 or equivalent of make mentioned in Appx B

S&F in repairs Stainless steel peg set of Minimum 5 hooks fixed to wall all as specified and directed by Engg-in-charge.

S&F in repair Jet spray brass chromium plated with 8 mm dia 1 metre long easy flex tube and in chorme finish, fixed to EWC all as specified and as directed.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

S&F in repair Stainless steel Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified.

S&F in repairs 32 / 40 mm dia and 750 mm long PVC waste pipe for urinals / WHB / Sink etc. with coupling complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450 mm long PVC Connection complete all as specified .

S&F in repair 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms).

S&F in repair cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete.

S&F in repair cast iron Nahani trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete.

Supply and fix in repair 500 litres capacity triple layer (white), rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S&F in repair stainless steel kitchen plate rack of size 31" x 36" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete. Make:- Blue star, Prayag, Nirali.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, Including 75 to 110 mm CP waste coupling, PVC flexible waste pipe complete all as specified and directed.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including 15 mm size pillar tap, cast copper alloy, chromium plated with capstan head, screwed down high Pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

Taking out / Removal of existing roof treatment of any type of roof consisting of screed bed, tar felts etc, and removal of debris outside MD land complete all as specified and directed by Engr in Charge

M&L for plan cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3.0 kg of cement per sqm complete.

M&L for screed bed 20 mm thick on concrete surface in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed Note:- WPC will be measured & Paid separately

Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer mineral finished modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 150 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and as directed by Engr in Charge

Supply only Liquid water proofing compound

Demolition of abandened RCC service water tank capacity exc 1000 ltr but not exc 2000 ltr capacity including beams and other supporting structure over roof of max up to triple storied building and removing from roof exc 1.5 Km not exc 5.0 Km and making good disturbed portion of roof with CM 1:4 using WPC all as directed by Engineer in Charge.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:4 including taking down old cover slab complete. Note:- Reinforcement steel will be measured & paid sepratly.

M&L for high Strength deformed CRS steel bars of grade Fe-500 D / 550 D as in reinforcement 8 to 10 mm dia, cut to length, bent to shape as required including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia all as specified & as directed by Engr-in-Charge.

Demolition of brick / stone / PCC block masonry built in cement mortar including all quoins, pillars, arches etc. including removal of debries out side MD land, all as specified and as directed.

M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

M&L PCC 1:2:4 type B1 20 mm graded aggregate in roof kerbs or mud stops rounded or Chamfered on edges and as specified.

M&L 15 mm Cement morter in 1:3 finished even and smooth with using extra cement and water proofing compound for repair of chhajja and facia etc ( WPC will be measured and paid seperately ) . Note:- The work will be done in double storey building. The rate of scaffolding included in this items

M&L for Dubbing out of average 20 mm thick in cement mortar 1:6, on irregular face of walls (when specifically ordered in writing) complete all as specified & directed.

S&F in repair PVC (SWR) pipes 110mm dia single socketed, in any length, jointed with solvent cement, fixed on walls or floors with clamp complete all as specified and as directed

Dismantling of 75 / 100 mm dia cast iron drain pipes, jointed in cement mortar fixed on wall.

S&F 100 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete.

S&F 75 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete.

S&F 100 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length, laid in trenches, with cement joints, complete.

S&F 75 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length, laid in trenches, with cement joints, complete.

S&F 75 mm dia bore CI socket (double) coller connected to branche piece, bend or parallel branches complete.

S&F 100mm dia bore CI socket (double) coller connected to branche piece, bend or parallel branches complete.

S&F 75 mm dia bore CI oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.

S&F 100 mm dia bore CI oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.

S&F 100mm dia bore CI branch piece single, equal or unequal, ordinary or inverted (Spigot or socketed type) or paraler branches with oval access door complete.

S&F 100 mm dia bore CI branch piece double, equal or unequal, ordinary or inverted (Spigot or socketed type) or paraler branches with oval access door complete.

S&F 75mm bore dia CI branch piece single, equal or unequal, ordinary or inverted (Spigot or socketed type) or paraler branches with oval access door complete.

S&F in repair Salt-glazed stoneware gully traps, square or round mouthed, type of size 150 x 150 mm complete all as specified & directed by Engr-in-Charge.

M&L for cleaning of HDPE service water tank of capacity exc 250 litre but n exe 500 litre and circulating pipes at any position by removing sludge, mud, or any other foreign material from the bottom, and internal surfaces by scrapping using wire brush draining out water from the tank and washing internally with water and bleaching powder (0.10 kgs of bleaching powder will be mix in 1 litre water ) and again draining out water from tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed

Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/white washing/colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings, bulk head fittings, tube light fittings, street light, etc all as specified and directed.

Taking down carefully (copper/aluminium ) submain wiring complete of any type (batten/surface conduit or concealed ) for socket point or power point complete with all fittings such as swiches sockets pendants etc complete and making good disturbed surface of wall,floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing / colour washing to match with the existing surface complte all as specified and directed

Material & Labour for Concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly complete.

Note:- (i) Sunken type terminal box and cover frame will be measured & paid separately. (ii) Cutting chases for Concealed wiring will be measured & paid separately

All as per item No 133 above point wiring for One 5 Amp Socket outlet on same board with other switch control.

All as per item No 133 above point wiring for One 5 Amp Socket outlet on independent board with other switch control.

All as per item No 133 above point wiring for bell /Buzzer point controlled by one bell push 5 amp on same board.

All as per item No 133 above but point wiring for One light point controlled by two Nos 2-way switch

All as per item No 133 above but wiring with 2.50 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.50 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

S&F module cover plate with frame for one module as specified & directed.

S&F module cover plate with frame for two module as specified & directed.

S&F module cover plate with frame for three module as specified & directed.

S&F module cover plate with frame for four module as specified & directed.

S&F module cover plate with frame for six module as specified & directed.

S&F module cover plate with frame for eight module as specified & directed.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for one / two module, fixed flush to wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for three module, fixed flush to wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for four module, fixed flush to wall complete.

S&F sunken type sheet metal Flush box fabricated with 1.5 mm thick sheet for six / eight module, fixed flush to wall complete.

Supply and fix modular type white switch, 230 volts, single pole one-way 6 Amps in 1 module Make :- Legrand Arteor series Cat Part No :-573400 or equivalent make mention Appx B.

Supply and fix modular type white switch, 230 volts, single pole two way 6 Amps in 1 module. Make :- Legrand Arteor series Cat Part No :-573402 or equivalent make mention Appx B.

Supply and fix modular type white switch, 230 volts, single pole one-way 16 / 20 Amps in 1 module. Make :- Legrand Arteor series Cat Part No :-573410 or equivalent make mention Appx B.

Supply and fix modular type white socket 3 pin cum 2 pin, 6 Amps universal type, 230 volts in 2 modules. Make :- Legrand Arteor series Cat Part No :-573470 or equivalent make mention Appx B.

Supply and fix modular type white socket 3 pin cum 2 pin, 6 / 16 Amps universal type, 230 volts in 2 modules. Make :- Legrand Arteor series Cat Part No :-573471 or equivalent make mention Appx B.

Supply and fix Modular type fan step regulator 100 watt 2 module 230 volts. Make :- Legrand Arteor series Cat Part No :-573416 or equivalent make mention Appx B.

Supply and fix Modular type Bell push 6A one way, 1 Module, 230 volts Make :- Legrand Arteor series Cat Part No :-573413 or equivalent make mention Appx B.

Supply and fix in repair of Lamp holder white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete.

Supply and fix in repair of Bell musical type AC 230 Volts, as directed including connecting complete.

M&L for Ceiling rose modular type, 2 to 3 terminal polycarbonate, isolated body type suitable for AC 230 volts

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 21 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make :-Wipro cat part No.LL20-221-XXX-65NE3 or equivalent make mention Appx B.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make :-Wipro cat part no.LL20-111-XXX-65NE3 or equivalent make mention Appx B.

S&F LED type bulkhead fitting 10 watt made die cast aluminium housing with complete assembly and PC opal diffuser suitable for surface/wall mounted dust and water resistant complete all as specified and as directed. Make: Wipro cat part no. LW07-141-XXX-57-XX or equivalent make mention Appx B.

Supply and fix in repair LED lamp 5 watt retro type complete all as specified and directed. Make:- Wipro / Havells / Phillips

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC caping & casing not less than 20 mm width with all necessary fitting and including one run single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with caping & casing will be measured as one RM for payment.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC caping & casing not less than 20 mm width with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with caping & casing will be measured as one RM for payment.

S&F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for for IP 43 & IP 54, single pole and neutral 250 Volts, fixed flush to wall complete with IP 54 protection complete all as specified and directed. Note:- Quoted rate shall be deem to include cost of fixing of DB flush (Concealed ) in wall. Make : Legrand Model: IP 54 IK 09 507641 Ekinox or equivalent make mention Appx B.

S&F distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 250 Amps rated copper busbar, 415 Volts with in built MCCB 160 Amps, 4 pole, 10 KA - 01 No, including S&F MCB SPN 32 Amp, 10KA -04 Nos, MCB SPN 63 Amp -04 Nos. 2 neutral bar and 2 earth bar IP 54 protection, cable ties for cable management (Fully insulated busbar and shrouded neutral bars), reversible door for IP 43 & IP 54, fixed flush mounted to wall complete all as specified and directed. Note:- Quoted rate shall be deem to include cost of MCCB, MCB,s & fixing of DB flush (Concealed ) in wall. Make : Legrand Model: No.507750 Ekinox DPX 160MCCB IK-09 or equivalent make mention Appx B.

Supply and fix MCB’s single pole & neutral 6-32 Amps, 230 volts with ‘B’ curve, fixed in sheet metal board complete including connecting.

Supply and fix MCB’s single pole 6-32 Amps, 230 volts with ‘B’ curve, fixed in sheet metal board complete including connecting.

Supply and fix exhaust fan metalic body 150 mm sweep Powder coated metalic finish, 3 blades with bird guard complete with plastic louvers shutter(flap type) of size 350 mm x 350 mm and necessary fixing arrangement including cutting of hole and grouting of nuts and bolts, making good the disturbed surface compete all as specified and as directed by engr-in-charge. Make : Havells Ventilater DS or equvalent of make mention in Appx B.

S&F in repair building security LED Light fitting 35 watt, system efficiency not less than 100 lumen / watt, IP 66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete.

Material and labour for renewal earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.

Note:- Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length.

Supply and fix wall mounting panel board of size 1000mm x 750 mm x 100 mm (approx) made out of not less than 1.6 mm thick CRCA sheet, powder coated, having compartment for fixing of MCB DBs and energy meter complete with acrylic glass cover at the front or as directed, front locking arrangement and suitable size handle, duly affixed with label for LT 440 Volts, holes for passing of cable at bottom, top and on both sides, earthing fixing arrangement or earth link outside complete with suitable arrangement for mounting on walls.The Panel shall be fixed flush mounted on wall including taking out old / unsv / rusted panel board complete all as specified and as directed by Engr-in-Charge

M&L for taking down old sheet metal distribution box of size 1200 mm x 1000 mm x 100mm deep from wall and making good the distribution surface by filling the same with PCC block masonary in of mix 1:5:8 set in set CM 1:4 & rendring 10 mm thick in CM 1:4 finished even & smooth without using extra cement with application of 3 coat of white wash to match with existing surface complete all as specified and as directed by Engr-in-Charge.

Extra over Item No 113 hereanbefore for applying 10 mm thick finishing coat in cement mortar 1:4 and finishing the surface even & smooth without using extra cement.

RACON CONSTRUCTION

lord krishna construction company

suvidhiconstruction

EVEREST BUILDERS

JAMNAGAR ELECTRIC AND MACHINERY CO