Providing Fire and Sefty facility to Block Panchayayt RRF

Items

HYDRANT - 1.Provide one Hydrant for 100 meter square area. (as per the Circular) no. WM1/40/2022/LSGD (wm) DTd. 02.02.2022) 2. Hydrant as per IS 3844:1989 3. Diameter of delivery pipe- 100mm 4. Material G.I Pipe 5. Colour- Red 6.Hydrant should be placed outside the building minimum 02 mtr away from the building

Accessories - 1. 63mm diameter female coupling with single head landing valve 2. Delivery Hose - 63mm diameter, 15 mtr length with male and female coupling 3.Branch pipe- With 20mm nozzle and suitable for 63mm, instantaneous connection

Hose box- Above three Accessories shall be housed in a 750*600*250 mm size MS cabinet made from 2 mm thick MS sheet with glass door of thickness 6 mm. The Cabinet shall be painted with red colour shade no.536 as per IS5.

Diesel pump - 1. Discharge - 1620 LPM (as per the Circular no. WM1/40/2022/LSGD (wm) Dt. 02.02.2022) 2.Head - Not less than 35 mtr 3. Diesel pump should be installed inside the pump House (BIS- 15303) 4.Exhaust pipe of the Diesel pump should be fitted vertically above the pump house in such a way that the smoke goes directly to the atmosphere 5. Adequate number of fire extinguishers shall be installed in the pump house

FIRE BUCKET - A fire bucket is a bucket fitted with water or sand which is used to prevent or extinguish fires 1.Material MS GALVANIZED SHEET 2.TOP Dia 260mm 3.Height 270 mm 4. Body Thickness 2.8 mm 5. Painting two coats of White paint inside two coats of red paint out side . Ear and handle painted black.Letter "FIRE" painted centrally in black color (75mm height and 12mm thick) 6. Minimum 04 Nos .Should be arranged in metallic stand which should be easily accessibility and visible Body- The body shall be in two halves which shall be joined together by butt wlding. The top rim of the body shall be wired and unformly beaded. The beading shall be fully formed without gaps. The bottom shall be dished and shall be joined to the bodyby butt welding so that there is no raw edge or crevice on the inside of the bucket Ears- The ears shall be made of mild steel sheet and shall be fitted to the body at the top by means of welding with the flat head on the side. The thickness of sheet for ears shall be 2.8 mm Top Handle- The top handle shall be mild steel road of 10mm in diameter with its ends bent up

FIRE BUCKET - A fire bucket is a bucket fitted with water or sand which is used to prevent or extinguish fires 1.Material MS GALVANIZED SHEET 2.TOP Dia 260mm 3.Height 270 mm 4. Body Thickness 2.8 mm 5. Painting two coats of White paint inside two coats of red paint out side . Ear and handle painted black.Letter "FIRE" painted centrally in black color (75mm height and 12mm thick) 6. Minimum 04 Nos .Should be arranged in metallic stand which should be easily accessibility and visible Body- The body shall be in two halves which shall be joined together by butt wlding. The top rim of the body shall be wired and unformly beaded. The beading shall be fully formed without gaps. The bottom shall be dished and shall be joined to the bodyby butt welding so that there is no raw edge or crevice on the inside of the bucket Ears- The ears shall be made of mild steel sheet and shall be fitted to the body at the top by means of welding with the flat head on the side. The thickness of sheet for ears shall be 2.8 mm Top Handle- The top handle shall be mild steel road of 10mm in diameter with its ends bent up

FIRE RAKE- 1. Length - not less than 2 mtr 2. Head- Shall not be more than 1 feet wide 3. Teeth - shall be 10 cm long 4. 7 Teeth at an interval of 2 inches shall be provided

FIRE BEATER - The main purpose of the fire beater is to pull out small fires. IT should be user friendly and the pipe should not be bend while using the fire beater in fire conditions. Total weight of the fire beater shall be designed in such a way that fire personnel can comfortably use this during the fire conditions 1.It should have mainly 3 part- Metal pipe. Metal Stripand Rubber mat a) GI Metal pipe- Diameter should be 32 mm Length- Should not be less than 1.5 meter b) Rubber mat- A thin metal mesh or wire should be provided inside the mat Thickness- 0.5 CM, Length45cm,Bredth-3cm,Thickness- 0.2cm,Nut&Bolt- 5Nos 2. Metal pipe should be welded on the metal strip 3. Rubber mat shall be fitted to the strip by using nut & bolt 4. Additioanl metal support should be given to the strip for ensuring adequate strength