Restoration of rain Damages of LWSS Kalroo Chakban in Tehsil Shahpur Distt Kangra, (HP) (Under PDNA).

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil I/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth ,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts .

Laying jointing and testing of bevlled ended G.I. pipe (M-Class) various dia table-5 with circumfernital butt welded joints every two joints (94%) by electrical are welding thincless shall be equal to pipe wall thinckes)and testing of G.I. pipe of following dia cinfirming to ISI 1239-1990 (part-III) having wall thinckess as specfic below capable of with standing required test pressure including manufacturing and fabrication of reducers/tapers all short pieces etc. as per site requirement made from parent tubes the laying of pipe shall also providing MS flanged of required table including welding of flanges of every third pipe (6%) duly welded including nuts. complete within all leads and lifts. 100mm

65 mm Dia

Providing, fixing, MS flange pairs confirming to IS-6392-1971 (Latest with upto date ammendments) of class (Table 5) having following dia specified welding both sides of flanges according to relevant standereds i/c nuts bolts and rubbur sheet washer confirming to IS 1367-1981 and carriage of material with in all leads and lifts. 100mm Dia

65 mm Dia

Laying, jointing & testing in trenches of Galvanised mild steel tube (L-Class) of following diameter including tube fittings complete (earth work to be measured and paid for separately) including testing of joints,within all leads and lifts . 40 mm Dia

32 mm Dia

25 mm Dia

Welding of leakage joints with two layers at various places and various dia including carriage of welding set and generator set at site requiremeent as per direction of but welding to make the joint leak proof with electric welding and generator set at site complete in all respect. 150mm dia

80 mm dia