Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in All villages of Subir Taluka of District Dang for One Year.

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance,

Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest

amendment and 32 mm NB ISI marked medium duty GI Pipe in All villages of Subir Taluka of

District Dang for One Year.

The office of the Executive Engineer

Public Health Mechanical Division

Gujarat Water Supply & Sewerage Board

1st Floor, “Jal Bhavan”, Opposite to Kusum Vidhyalay,

Tithal Road, Bhagdawada, Valsad -

Volume III: Price bid Page

NAME OF WORK : Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and

32 mm NB ISI marked medium duty GI Pipe in All Villages of Taluka Subir of Dang District for One Year.

Schedule showing the material to be supplied from the store of GWSSB for the work

contracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. Rate Rs. Unit Place of

No. Delivery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the Tender.

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought by

the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled materials

at the rate of current SOR from contractor bill.

Signature of Contractor Executive Engineer

P.H. Mech. Division

Volume III: Price bid Page

NAME OF WORK : Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and

32 mm NB ISI marked medium duty GI Pipe in All Villages of Taluka Subir of Dang District for One

Particulars Qty. Rate Unit Amount Rs.

Providing light commercial (medium) four wheeler Diesel

vehicle on rental basis for one day (particularly for H.P repairing

1 works) with Driver & POL(Per day) (The vehicle shall be fully 12 100490.00 Team

insured with fitness certificate & PUC) with 01 Semi skilled

Labour (Per day) & 03 Unskilled Labour (Per day) for year.

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with Hexa.Nut M-

12x1.75 & Washer 4mm thick

A-2 Hex. Bolt M10x1.50x40 mm long 2 2.58 No

A-3 Nylock Nut M10x1.50 99 1.72 No

A-4 Handle Axle(Stainless Steel) 89 73.92 No

A-5 Washer (4 mm thick) for Handle Axle 0 1.29 No

A-6 Bearing (No.6204-Z) 213 27.63 No

A-7 Spacer(for pump Head) 3 4.26 No

A-8 Chain with Coupling 198 68.32 No

A-9 Bolt for front cover M-12x20 mm long 31 2.27 No

Pump Head Assly.Consi.of Item No.(1) to (7) as per 2

(B) SPARES FOR CYLINDER

B-1 Pump Bucket 571 4.63 No

B-2 Sealing Ring 627 3.00 No

Upper Valve Assly comp. consi.of item as per fig 3.6 A 152

(Part no 1 to 4 & 8 to 9)

Lower Valve Asslycomp.consi.of item as per fig 3.6 B 113

(Part no 5 to 7 & 10)

(C) WATER TANK consi.of item as per fig 3.6 B (1 to 6) 11 601.44 Set

(D) Cylinder With Brass Liner consi.of item (a) & (b) 68 280.32 Set

(E) REDUCER CAP 29 69.54 No

(F) Spares for Conne. Rods

F-1 Hexagonal Coupler M-12 x 1.75 x 50mm 67 6.61 No

(G) UPPER VALVE ASSEMBLY SPARES

G-1 Upper Valve Seating 33 1.53 No

G-2 Plunger Yoke Body 0 111.25 No

G-3 Bucket Spacer 0 86.25 No

Volume III: Price bid Page

G-4 Follower 0 104.88 No

G-5 Plunger Rod (S & S) 13.00 87.58 No

G-6 Upper Valve (Guide) 0 47.50 No

(H) LOWER VALVE ASSEMBLY SPARES

H-1 Check Valve Seat 0 80.66 No

H-2 Check Valve 0 66.25 No

H-3 Check Valve Seating 37 2.29 No

H-4 Rubber Seat Retainer 20 36.63 No

(I) Handle Bar consisting of Item no (1) & (3) as per Fig 4.6 15 613.76 Set

Cylinder Assembly Complete consisting of Item no (1) 75

to (7) as per Fig

Conn. Rod Electro Galvanising consisting of Item no (1) 448

to (3) as per Fig

Special Tool Kit for I. M.-II Handpump Consi. Item (1) to

(11) as per IS 15500 Part-8 with tool box

Standard Tool Kit for I. M.-II Handpump Consi. Item(1)

to (16) as per IS 15500Part-8 with tool box

(N) Third plate consisting of Item (1) & (2) as per fig 4.5 0.00 129.03 Set

(O) Spares for deep well Hand pump-Extra Deep

Cylinder Body with Brass Liner consisting of Item no (1)

for body fig 5.2 & (2) for brass linear Fig 6.1 B

O-2 Handle Bar consisting of Item no (1) to (3) as per Fig 4.7 0.00 1187.20 Set

Upper Valve Assembly complete consisting of Item no

(1) to (11) as per Fig

O-4 Follower as per Fig 6.7 0.00 161.25 No

O-5 Bucket Spacer-Lower as per Fig 6.5 0.00 75.21 No

(P) Pedestal of Telescopic stand 0.00 1613.76 No

Manufacture Supply & Delivery of ISI Marked 32 mm dia.

medium quality galvanized mild steel tubes (Continuously

welded electric resistance welded (ERW)/high frequency

induction welded (HFIW) /Hot finished welded (HFW) type

screwed at both ends to IS:554/ 1985 for pipe suitable for water

and gas application, socket on one end and other end

protected with plastic thread protector in approximate length of

3 mtrs. conforming to IS:1239 (Part-I) 2004 With latest

amendment and socket to conforming to IS:1239 (Part-II)

With latest amendment

Total Cost for one year (Rs.)

1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of the Volume I (GCC).

2. Contractor has to keep number of manpower for each repairing team as per the condition no. 1 of the Special

Condition of the Volume II (Technical Bid).

3. Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial Terms

Volume III: Price bid Page

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 18,90,546.00 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Signature of Contractor Executive Engineer

P.H. Mech. Division

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and

32 mm NB ISI marked medium duty GI Pipe in All villages of Taluka Subir of Dang District for One Year.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note : The Contractor cannot keep same Handpump repairing team working as another sub

division’s Handpump repairing Team.

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor Executive Engineer

P.H. Mech. Division

Volume III: Price bid Page