DEPOSIT-Improvements to Mukkom Town at Kozhikode Dist. Part-2-Providing street light fittings-General Electrical Work

Amount

Improvements to Mukkom town in Kozhikode District - Providing electrical fittings

90.15.3.7:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters

90.15.3.8:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters

OD171929/2022-2023:Supply of high-quality integrated LED Street light Luminaries having power consumption not more than 90W and light output not less than 11000 lumen with a nominal efficiency greater than 120 lumen/watt. The housing should be of non-corrosive high pressure die-cast aluminum LM6 Grade to withstand extreme environments and should have corrosion resistant powder coating to pass NSS of 500 Hrs. The Luminaries should be having Minimum 50000 burning hours (L70B50) with CRI >= 70 SDCM < 5 and co-related colour temperature(CCT) of 5700K.the ingress protection should be minimum IP 66 with an IK rating of 08.The LED used in luminaries shall be SMD type only of make LGIT,Lumiled,Osram,Nichia,and CREE& no other make. The luminaries should be capable of withstanding voltage stress 440V for 8 Hrs, should have an auto shutdown@325V and have auto recovery feature, under voltage protection with input Voltage stress of 100V for 48 Hrs and EMI/EMC compliant. The driver should be a potted driver not a printed circuit board without casing, mounted inside the luminaire with PF > 0.95 and THD < 10%.Luminaire and driver shall be separately BIS approved of same make equivalent to Phlips BRP333 LED110 CW R5C FG PSU S1 SPD or Techno-commercially equivalent approved by engineer in-charge.LM80, LM79, Type test certificate and BIS certificate need to submitted

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

OD113524/2022-2023:Supply and fixing 4 pole porcelain terminal connector

OD92280/2021-2022:Supply and fixing Syntax junction box GSJB 1616 with provision for fixing SP/DP MCB for terminating street light cable

OD108612/2022-2023:Supply and fixing of dust and vermin proof, wall mounting Sintex junction box GSJB 1414 suitable for fixing connector, fuse units etc., knock out for cable entry and exit, for street light termination as required.

9.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.12.5.3:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.12.5.41:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.2.4:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

9.3.29:Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

OD108611/2022-2023:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation40/32mm or nearest size

90.16.1.10:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

OD107473/2022-2023:Steel reinforcement for RCC Work including straightening, cutting, bending, placing in position and binding all complete.

90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

OD114407/2022-2023:Supply and providing 32A TPN disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuse links on wall/angle iron frame including drilling holes in frame,making connections ,etc as required (Front handle type)

OD114408/2022-2023:Supply, conveyance and installation of 32A DP Switch disconnector fuse Unit 240V 50Hz AC supply with ISI marked HRC fuse links suitable for fixing existing panel assembly and giving connections etc.

OD114747/2022-2023:Supplying and fixing 24Hours Digital Time Switch for operating ON-OFF function complete with connections, testing and commissioning etc. as required. (L&T make Digital Time switch 2 module cat no AUTS02DIG00 or Techno Commercial equivalent approved by engineer in charge)

OD114748/2022-2023:Supplying and fixing 40A 4Pole AC-1 Power Contactors complete with connections, testing and commissioning etc. as required. (L&T make 40A Power Contactors cat no CS97012 or Techno Commercial equivalent approved by engineer in charge)

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

OD114842/2022-2023:Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc. as required

candelaengineering corporation

DEEPESH P

Bidder Name

DEEPESH P

candelaengineering corporation

Best Power Controls