KMC/S_D/KGPS-50/24-25

Amount

Disconnecting the main supply , open out the cables , dismantling the damaged components from the panel including its damaged enclosure by engaging expert personnel.

Supply and fixing of 3 pole , 40A , 415V, 50Hz MPCB with thermal release range of 28-40 Amp and with short circuit & overload protection. ( Make-L&T or any other reputed make)

Supply and fixing of 40 A (AC3 rated ),415V, MNX-40 , 3 Pole Power contactor. Make: L&T or any other reputed make

Supply and fixing of 1 pole Electronic timer type ST100 , 3-30 sec

Supply & fixing of the Current Transformer, Ratio : 50/5A, 5VA, Class 0.5 (Make: KAPPA/AE)

Supply and fixing of Modular Push button actuators (with pla stic front ring), Rised, colour: Red, green, blue, white, yellow, black Make: (Make: L & T/ABB/ Schneider/Simence/ GE)

S/F 230V, LED indicating lamp, (other colours)

Supply & fixing of 1.1kV Grade , 1.5 sq mm single core ' FR' PVC insulated copper conductor cable. Make : Havells/Unicab / Polycab / KEI Cables or Any reputed make.

Supply & replacement of power cable with 1.1 kv grade , 3 core , 10 sq mm PVC Insulated and PVC Sheathed Industrial Copper Flat Cable for Submersible usage , conforming to IS 694. Make : Unicab / Polycab / KEI Cables or Any reputed make.

Proper positioning of the floating type surface aerator with necessary arrangements and laying of the submerisble cable inside the aerobic pond upto required length using proper method with special care.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry for submersible cable compatible with specifications.

Internal control circuit wiring including necesary connection with 1.5 sq mm copper cable lugs , pvc tapes , nuts & bolts etc. and making proper termination for starter panel as per requirement.

Fitting , fixing of the motor cable at both panel side & motor terminal side for each starter panel by crimping method including supplying and fixing of copper lugs ,nuts & bolts , PVC tapes and joitning materials by skilled Electrician.

Complete checking and testing of the power and the control circuit connection for each starter panel and also trial run of the motor as per direction of EIC.

Supply,delivery and installation of starter cubicle box of outdoor rated , 415V, IP55 , single door , dust and vermin proof & the box shall have minimum dimension of 500 mm x 450 mm x 250 mm with canopy. The nuts, bolts, washers used in the box shall be galvanized to avoid rusting. The box shall have two nos. of solid earthing points on either side and holes for cable entry. Before fixing the cubicle box , its mounting structure shall be thoroughly checked, cleaned and repaired as required & painting the same with anti-corrosive coat . Checking and testing of the underground main incoming cables & earthing connection with the boxes to be made before trail run.

POWER INDIA (BID ID -6496800)

STAR ENTERPRISE (BID ID -6489743)