Constructing Security Cabin At 3 (Three) Various Location Of Guhai Dam Site, At- Khandhol, Ta-Himatnagar, Dist.-Sabarkantha

Name of work : Constructing Security Cabin At 3 (Three) Various Location Of Guhai Dam Site, At- Khandhol, Ta-Himatnagar

,Dist.-Sabarkantha

Bill of Quantity

Item No Description of Item Qty Unit Rate in Figures Amount

Item No.1 Excavation for foundation in all sorts of soil including yellow sandy gravelly soils ,soft & hard murrum etc. in dry

1 condition including depositing the excavated stuff in uniform layers in banks or as and where directed etc. complete for 77.00 Cum 107.8000

lead up to 500m and all lift. (BY MACHINERY) (b)Including dewatering.

Item No.2 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

2 exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Item No.3 Providing & Laying in position "NOMINAL MIX" cement concrete using cement, sand and crushed

aggregate by mass and machine mix for C.C./R.C.C work incl. necessary formworks centering, scaffolding,

3 compaction by vibrator, curing as directed with all lead & lift etc complete Without Dewatering and excluding cost 20.00 Cum 3346.0000

of steel reinforcement. (A) For Foundation concrete / General purpose,(a) C. C. Nominal Mix, M-10 and MSA-40

Item No.4 Providing and laying uncoursed rubble masonry in ordinary portland cement mortar 1:5 proportion in

foundation including curing etc. complete for all leads and lifts.

Item No.5 Providing and laying burnt brick masonry for superstructure with ordinary portland cement mortar 1:5

5 proportion including providing scaffolding racking out joints curing etc. complete for all leads and lifts. 36.00 Cum 5371.1000

(Conventional Bricks)

Item No.6 Half Brick work :Half brick masonry in common brunt clay building bricks having crushing

6 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) (B) 3.68 Sqmt 629.8360

Item No.7 Providing & Laying in position "DESIGN MIX" cement concrete using cement sand and crushed aggregate

for C.C./ R.C.C work by"FLORI" including necessary formwork, centering, scaffolding, compaction by vibrator,

7 curing as directed with all lead & lift etc complete without dewatering and excluding the cost of steel 17.00 Cum 4543.0000

reinforcement. (A) For Footing of column / Abutment / Pier / Bottom slab of barrel / Plinth course / Coping /

Approach Slab etc. (c) Concrete grade M-20 and MSA-20 mm

8 Providing & Placing in position reinforcement bars including cutting, bending, welding joints where necessary, 22.43 Qtl 7194.0000

hooking etc. complete as per drawing for all lead and lifts. TMT / CRS (FE 500 D)

Item No.9 Providing cement plaster in thickness and proportion as under including, smooth finishing, curing,

scaffolding etc. complete for all leads and lifts.Cement mortar 1:3 proportion.( b ) 12 mm thick.

Item No.10 20mm thick sand faced cement plaster(Gutka) on walls upto height 10 metres above ground level

10 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 240.00 Sqmt 321.0992

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Item No.11 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls

11 for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3- 211.70 Sqmt 184.7795

Bill of Quantity

Item No Description of Item Qty Unit Rate in Figures Amount

Item No.12 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm

12 / 300 mm x 450 mm x 8 mm in skirting, floors ,risers of steps and dedo on 10 mm. thick cement plaster 1:3 15.96 Sqmt 1487.8815

(1 cement: 3 coarse sand) & jointed with white cement slurry.

Item No.13 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6

13 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab 36.50 Sqmt 1018.9991

including rubbing and polishing etc. complete. (A) 25mm thick

Item No.14 Providing and fixing mirror polished 18 mm thick granite stone with full round edge and polished of approved

14 quality in clading on sill and around the doors/ windows/ ventilation with 12 mm thick cement mortor CM (1:4) and fixing 20.20 Sqmt 2099.6890

with cement slurry & adhesive including moulding of exposed edges as directed by engineering in charge etc. complete.

Item No.15 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring

15 mortar creme out upto surface using white cement including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed.

Item No.16 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at

16 required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.

Item No.17 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Threetrack member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

17 size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/

with 5mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

Item No.18 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt.

18 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for 0.34 Sqmt 1175.5592

Item No.19 Providing and fixing G.I shutters for Doors, windows and clearstory windows including blackenamelled M.S.

butt hinges with necessary screws. (i) Fully Panelled.M.S frames 12.5 cm x 7 cm. size including Steel work, welded in

built up sections framed work including cutting, hoisting, fixing in position Applying Painting two coats and priming coat

over new steel and other metel surface and Directed As per Engineer In Charge.

Item No.20 Providing and fixing Alluminium Door with Frame Size 100 x 50 mm and 28 mm thick Alluminium depress

panel Single or Double shutter.The Door And Frame insitu along with embeded steel pieces for stiffening & also taking

20 hinges & fintures.The whole Alluminium frame&single or double shutter is to be waterproof, weatherproof, termite proof & 1.00 Each 5500.0000

resistance to mild acid/alkali.Rates are to be inclusive of S.S hinges with necessary screws & alluminum fixtures &

fastenings & fartenersleeve.Colour and Shade approved by Engineer-In-Charge.

Item No.21 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to

21 give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and 211.70 Sqmt 40.5919

sand papered smooth.

Bill of Quantity

Item No Description of Item Qty Unit Rate in Figures Amount

Item No.22 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape

22 even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc 240.00 Sqmt 73.7502

Item No.23 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

23 surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign 211.70 Sqmt 82.9715

matter and sand papered smooth.

Item No.24 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings

24 and connection etc. complete on terrace . 500.00 Litre 3.9491

(Make:- Sintex, Vectus safe, Plasto Gold)

Item No.25 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including

25 sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 1.00 Each 1519.5046

400mm size. (i) In white colour.

Item No.26 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for

26 separately) including providing and fixing PVC flushing tank with a pair of C I or MS bracket with complete fitting such as 1.00 Each 2041.5635

lead valve siphon15 mm dia brass ball valve with polythene float CP brass handle unions and couplings for connecting

with inlet out let (A) vitreous China Pattern :(i) in white colour

Item No.27 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the

27 wall ceiling and floor.(B) 25mm

(Make:- Finolex,Ashirvad,Astral Pipe)

28 Item No.28 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia. 1.00 Each 158.8629

Item No.29 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Item No.30 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at

30 top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. 1.00 Each 3445.1807

complete as directed.

Item No.31 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

31 or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same 8.00 Rmt 72.6493

with adhesive solvent, including cost of all materials.

(Make:- Finolex,Ashirvad,Astral Pipe)

Bill of Quantity

Item No Description of Item Qty Unit Rate in Figures Amount

Item No.32 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

32 or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same 8.00 Rmt 91.8393

with adhesive solvent, including cost of all materials.

(Make:- Finolex,Ashirvad,Astral Pipe)

33 Item No.33 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 1.00 Each 958.1668

Item No.34 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i)

Item No.35 Providing and laying jointing and pointing with stiff mixture of Cement Mortar 1:1 (1-Cement : 1-Fine sand)

35 mm internal diameter salt glazed stoneware half round channels.

Item No.36 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are

of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of

pipe erected with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal /

36 PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp 24.00 Point 387.0000

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete. (Make for Pipe-Nihir,Precision,Vraj,polycab) (Make for Wire-

Polycab,RRkable,Avocab,finolex) (Make for switches-Anchorroma,Havells,Crabtree,ABB,Salzer,Toyoma)

Item No.37 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

(Make-Havells,Bajaj,Cropmpton,orient,usha)

Item No.38 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%,CCT 3000 K to 6500K,

38 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %( fitting required LM-79 & LM-80 12.00 Each 751.0000

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(A) Tube Light with integral driver(iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat-III

(Make-Havells,Bajaj,Philips,Surya,Crompton)

Deputy Executive Engineer Executive Engineer

Himatnagar Irrigation Sub Dn No.2 Sabarkantha Irrigation Division

Himatnagar Himatnagar