Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 CrAccepted-AOC J 219 LANE W 15 WESTERN AVENUE SAINIK FARMS NEW DELHI | ₹8.9 Cr Quoted ₹9.1 Cr | L1 | Accepted-AOC Accepted |
| 2 | L2₹9.8 Cr+₹74.1 L (8.14%)Rejected-Finance DELHI DELHI 110015 | WEST DELHI | DELHI | 110015 | ₹9.8 Cr+₹74.1 L (8.14%) | L2 | Rejected-Finance Highly Quoted |
| 3 | L3₹10.1 Cr+₹97.2 L (10.7%)Rejected-Finance 2277 RAJA PARK RANI BAGH RANI BAGH NORTH WEST DELHI DELHI 110034 | NORTH WEST DELHI | DELHI | 110034 | ₹10.1 Cr+₹97.2 L (10.7%) | L3 | Rejected-Finance Highly Quoted |
Tender Value
₹7.3 Cr
EMD Value
₹7.3 L
Closing Date
11 Feb 2023, 5:30 pmClosed
Commissioner, Municipal Corporation Satna (M.P.)
Municipal Corporation Satna (M.P.)
Design, Engineering, Procurement, Construction, Redevelopment and Refurbishment of Dada Sukhendra Singh Stadium and Maintenance of entire facility for a period 3 Years including 3 years defect liability period at Satna, Madhya Pradesh
2023_UAD_241977_1
27/SCDW/MC Satna, Dated 04/01/2023
Open Tender
Civil Works - Others
Percentage
330 days
Municipal Corporation Satna (M.P.)
Please refer Tender documents.
18 documents required · 18 mandatory
₹20,000
₹7.3 L
Municipal Corporation Satna (M.P.)
28 Jun 2023
5 Jan 2023
13 Feb 2023
5 Jan 2023
11 Feb 2023
20 Jan 2023
19 Jan 2023
Amount
Outdoor Courts - Tennis/Basketball (Acrylic 8 layer system- ITF Certified): ITF Certified, Application of 1 Layer of re-surfacer, 5Layers of dense rubber cushion, 2Layers of colour, & Court markings. Synthetic (Acrylic) Surface is laid over an Asphalt base - for Basketball Court "Synthetic (Acrylic) Surface is laid over an Asphalt base". Asphalt base - 30mmthk Bitumenous Concrete over a 50mm thk Bitumenous Macadam During execution if it is found that any additional layer is to be laid, then the same shall be paid as an extra item as per Vol 1. General Condition of Contract, 6. Deviations/ Variations Extent and Pricing.
Outdoor Courts - Tennis/Basketball (Acrylic 8 layer system- ITF Certified): ITF Certified, Application of 1 Layer of re-surfacer, 5Layers of dense rubber cushion, 2Layers of colour, & Court markings. Synthetic (Acrylic) Surface is laid over an Asphalt base - for Volley Ball Court "Synthetic (Acrylic) Surface is laid over an Asphalt base". Asphalt base - 30mmthk Bitumenous Concrete over a 50mm thk Bitumenous Macadam During execution if it is found that any additional layer is to be laid, then the same shall be paid as an extra item as per Vol 1. General Condition of Contract, 6. Deviations/ Variations Extent and Pricing.
Outdoor Courts - Tennis/Basketball (Acrylic 8 layer system- ITF Certified): ITF Certified, Application of 1 Layer of re-surfacer, 5Layers of dense rubber cushion, 2Layers of colour, & Court markings. Synthetic (Acrylic) Surface is laid over an Asphalt base - for Lawn Tennis Court "Synthetic (Acrylic) Surface is laid over an Asphalt base". Asphalt base - 30mmthk Bitumenous Concrete over a 50mm thk Bitumenous Macadam During execution if it is found that any additional layer is to be laid, then the same shall be paid as an extra item as per Vol 1. General Condition of Contract, 6. Deviations/ Variations Extent and Pricing.
Maple wood1. Cushion Pads- 8 mm thick cushion pads placed under the wooden sleepers for extra resilience 2. Pine/Fir Wood Sleepers - 63mm wide x 32 mm thick x 4’+ planks, chemically treated or termites installed 18inch centre to centre 3. 12mm Plywood4. Flooring – Maple, 20 x 57/83 mm, Tongue & Groove, kiln dried and treated for termites 5. The maple flooring will be finished with anti-skid polyurethane finish. For Badminton Courts
Athletic track: Preparing required base and Providing and laying IAAF Approved Synthetic Athletics Track Full PUR system with minimum 15 mm thick layer (product roposed should have a certification of a minimum 15 mm product) including line marking. The required base details as follows, During execution if it is found that any additional layer (other than above layers) is to be laid, then the same shall be paid as an extra item as per Vol 1. General Condition of Contract, 6. Deviations/ Variations Extent and Pricing.
Billiards Table with equipment (2.84 Mtr x1.42 Mtr)
Modular Tensile Structure: Sizes 10m x 15m Roof & Side Covers 650 Or higher gsm Water Proof & Fire Retardant of M2/B1 International Fire Rating Yes Certifications/Approval European Norms
LED Downlighter P & F of 15W, High efficient recess/ surface mounted LED round/ square downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP20 housing, Ambient temp-0 to 45DegC, CCT - 4000/ 5700K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<10%, Powerfactor>0.95, Surge protection - 2kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 90-265V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 1500 lm. (100 lm/W) - Cutout Dia-ø115mm Similar to Wipro LD06-171-XXX-57 -SMG1 Mollis Downlighte/ equivalent Make & Model.
LED Downlighter P & F of 24W, High efficient Surface mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP40 Housing , Ambient temp -0 to 45 DegC, CCT - 4000/5700K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<10%, Power factor>0.95, Surge protection - 2.5kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 90-265V AC and Safety Extra Low Voltage Safe level <60V DC as per IEC standard. Luminaire lumen ≥ 2400 lm. (100 lm/W) - similar to Wipro LD06-301-XXX-57 - SMG1 Mollis Surface Mounted DownLighter/ equivalent Make & Model.
LED Panel Lights: P & F of Integral, SMD 2x2 LED, IP 20, 36/40W LED Surface/ Recess mounted fixture with System efficacy of more than 100lm/W. Luminaire shall have satin finished translucence (HET) diffuser for Uniform illumination and wider light distribution. LM 80-08 compliant LEDs from reputed makes such as Nichia / Cree / Bridgelux / Lumileds should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, APFC, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 2KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Complying to SELV < 60V DC standards. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 Wipro Model No.CRCO10S038HP57GL1/ CRCO10R038HP57GL1 / Equivalent make & model as per site requirement.
LED Batten- IP65: P & F of Integral, SMD 2x2 LED, IP 20, 36/40W LED Surface/ Recess mounted fixture with System efficacy of more than 100lm/W. Luminaire shall have satin finished translucence (HET) diffuser for Uniform illumination and wider light distribution. LM 80-08 compliant LEDs from reputed makes such as Nichia / Cree / Bridgelux / Lumileds should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, APFC, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 2KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Complying to SELV < 60V DC standards. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 Wipro Model No.CRCO10S038HP57GL1/ CRCO10R038HP57GL1 / Equivalent make & model as per site requirement.
LED Street Light Luminaire- P & F of IP 66 protected 25 W street light luminaire with System efficacy of 110 lm/W (2750 lumens). Luminaire shall be made up of die cast Aluminium housing with PC lens and polycarbonate diffuser. Luminaire shall be designed with street optic LENS for uniform light distribution. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be potted, Integrated type, Multistage, Isolated, APFC Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage < 60V DC as per IEC standard., Driver Efficiency > 85% & 4 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Similar to Wipro LR06-311-XXX-57-XX Skyline PLUS Streetlight/ equivalent make & model.
LED Flood Light: P&F of SMD 40W LED Floodlight fixture with System efficacy of 85 lm/W (3400 lumens). Luminaire shall be made up of die cast Aluminium housing with PC lens and toughened glass diffuser. Luminaire shall be designed with street optic LENS for uniform light distribution. LM 80-08 compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be potted, Integrated type, Multistage, Isolated, APFC Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage < 60V DC as per IEC standard., Driver Efficiency > 85% & 4 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 20% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Similar to Wipro LF19-471-060- 57-XX LED FLOOD LIGHT/ Equivalent Make & Model.
Post Top Lantern at Entry/ Exit Gates - P & F of 35W post top lantern, High efficient LED with aluminium housing in Pure Polyester UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector. CRI>70, IP66, Ambient temp- 0 to 45DegC, Driver efficiency>85%, CCT-4000/ 5700K, THD<10%, Power factor>0.95, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 4275 lumens (95 lm/W) Similar to Wipro.LP07-431-XXX-57-CL or equivalent make & model. Complete erected in an approved manner on Pole/ cement concrete Gate Post/ Structure including mounting hardware and cable sleeves etc.
Cable Pull Pits/ Chambers: Construction of brick masonry pulling chamber of required size and depth up to 0.6 meter with 230 mm thick masonry in cement mortar proportion 1:6, 12 mm thick cement plaster in CM 1:4 in both side, 150 mm thick PCC M-10 at bottom, 100 mm thick R.C.C M-20 coping at top of wall, 100 mm thick precast concrete cover in RCC M-20. including excavation and back filling & clearing the site by removing debris & Shifting of the debris & making site good as per the Instruction of the Engineer In charge complete in all respect. 450 mm x 450 mm inside clear size
600 mm x 600 mm inside clear size
1000 mm x 1000 mm inside clear size
Earthing for Lighting Pole Providing MS Rod Earth Electrode (20 mm dia x 1.5 m long) with required length of 6SWG GI wire for individual lighting pole earthing.
Power Connection Charges: Providing electric supply (at desired voltage level) by power utility/ discom from its nearby substation/ distribution network through overhead line(s)/ or underground cable(s), line terminal & HT/ LT metering equipment including application fee, security deposit, consumption demand charges & other charges etc for sanction/ release of electrical connection from concerned power supply company/ DISCOM (Job to be carried out by DISCOM under DEPOSIT works)
Description of Work / Item(s)
Amount
Maintenance of Dada Sukhendra Singh Stadium and its entire facility for a period [3]Three Years
for 1st Year
for 2nd Year
for 3rd Year
shiv naresh sports pvt ltd
ADVANCED SPORT TECHNOLOGIES LLP
shiv naresh sports pvt ltd
ADVANCED SPORT TECHNOLOGIES LLP
shiv naresh sports pvt ltd
ADVANCED SPORT TECHNOLOGIES LLP
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .