Loading
Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹3.9 L
Closing Date
13 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
16 conditions · 4 needing a document upload
Financial Eligibility Criteria:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB , along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
All rates are inclusive of GST and bidders should be registered in GST.
Technical Eligibility Criteria:(a) The tenderer must have successfully completed or substantially completed (Which should have been issued not prior to 60 days of date of invitation of present tender) any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of work:- " Any track work. "
12 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.(Para 14.1 (see Page-17 of GCC, April-2022) & Tenderer shall submit the documents in support of their constitution of the firm as per Para 14 of GCC, April-2022 (See Page-17 to 19).
As per instructions please attach proforma of ANNEXURE V-A this certificate is to be given by attorney/authorized signatory/each member of partnership firm / Joint Venture (JV)/ Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.) Non submission of above certificate (s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent up on the tenderer to identify, state and submit the supporting documents duly self-attested / digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Proforma is available in uploaded documents.
Certificate of Information regarding Employment/Partnership etc. of Retired Railway Employees with the tender as per the attached Performa. As per clause No 16 (a) and (b) of GCC Part-I April 2022 corrected up to date. (As per Para 16 of GCC, April2022 (See Page-19 to 20).
Restrictions on the Employment of Retired Engineers of Railway Services Within One Year of their Retirement: As per Para 59.9, of GCC, April-2022 (see Page-91).
Certificate of NO Relative being an employee of Western Railway as per attached Performa.
The tenderer should upload the scan copy of EPFO and ESI registration number. However EPFO and ESI registration would be mandatory and documents towards EPFO and ESI registration must be submitted before execution of the agreement.
In case of Bid Security in the form of Bank Guarantee, the same should be in favor of Sr. DFM Vadodara with the tender for due performance with the stipulation to keep the offer open till such date as specified in the tender, under condition of tender. (GCC April 2022 Part I Instructions to tenderers (ITT) para 5 Bid Security (1) (a,b,c),(2) (3)(i-viii). As per ACS 2 issued vide Rly. Board letter No.2022/CEI/ CT/GCC-2022/Policy date 13.12.2022: (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids. As pr ACS 5 RB No. 2022/CE-I/CT/GCC-2022/Policy date 20.10.2023:- Para 5(3) II The original bank guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bid.(i.e. excluding the last date of submission of bids).
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. As par Para 15 of GCC, April-2022 (see Page-19).
Maintenance period for the work is "NIL CALENDAR" from the certified date of the completion.
Ekta Nagar - Providing one loop line.
DRM-BRC-170-OF-2025-26~WR
DRM-BRC-170-OF-2025-26
Open
Works - General
10 Months
Vadodara, Gujarat
₹0
₹3.9 L
13 Feb 2026
21 Jan 2026
30 Jan 2026
114 items across 2 schedules · ₹6,26,87,019.18 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Preparation of foundation for Embankment by clearing, grubbing, stripping top soil (average 150 mm) and stacking beyond foundation area, thereafter ploughing and pulverizing 150 - 200 mm of top of soil with tractor trolley, mixing water to achieve OMC with water sprinkler or left for natural drying, as required, and compaction with vibratory roller of suitable capacity to achieve 98% MDD for laying first layer of soil for embankment construction. | 100 Sqm | 6500.00 | 604.92 | 39,319.8 |
| 2 | Using Soil Class SQ2 | cum | 12000.00 | 529.05 | 63,48,600 |
| 3 | Mechanical manufacturing of blanketing material by using only hard and durable stone crushed in mechanical crusher to different gradations, wet mixing of the same in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 w ith latest correction slips. Note: This item shall be used only when entire constituent of blanketing material is mechanically manufactured by crushing of hard and durable stone into desired gradation of designed proportion. | cum | 588.00 | 2,162.18 | 12,71,361.84 |
| 4 | With provision of one 50mm wide retro- reflective tape in horizontal direction, duly secured/tight with vertical posts. | Metre | 500.00 | 248.25 | 1,24,125 |
| 5 | On top of subgrade or prepared subgrade before laying blanketing layer with minimum strengths in Grab test, Trapezoidal Tear test and Puncture test of 700N, 250 N and 1800 N respectively. | Sqm | 6552.00 | 135.05 | 8,84,847.6 |
| 6 | Below the ballast and above blanket layer with minimum strengths in Grab test, Trapezoidal Tear test and Puncture test of 1750N, 800 N and 5800 N respectively. | Sqm | 2352.00 | 248.37 | 5,84,166.24 |
| 7 | Providing and fixing Weep Holes in Abutments, Wing walls and Return walls etc., of new bridges with 110mm dia UPVC pipe Type A ISI marked with all contractor's men, material, transportation, all taxes as per specifications and as directed by Engineer-in- Charge. | Metre | 300.00 | 274.89 | 82,467 |
| 8 | Up to 40 m long rail panel | RM | 672.00 | 9.8 | 6,585.6 |
| 9 | More than 40 m long rail panel | RM | 620.00 | 15.5 | 9,610 |
| 10 | For Casual/Scattered Rail Renewal work | RM | 226.00 | 38 | 8,588 |
| 11 | For Casual/Scattered Rail Renewal work | RM | 200.00 | 40.24 | 8,048 |
| 12 | Locations other than Ballasted Deck Bridge | Each | 80.00 | 507.15 | 40,572 |
| 13 | By using Contractor's Grease Graphite | Each | 100.00 | 40.38 | 4,038 |
| 14 | Rail section of 52Kg and above | Each | 130.00 | 108.38 | 14,089.4 |
| 15 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 2.00 | 9,223.09 | 18,446.18 |
| 16 | 1 in 8½ Turnout (Under Traffic Block) | Set | 1.00 | 36,162.9 | 36,162.9 |
| 17 | 1 in 12 Turnouts | Set | 2.00 | 76,893.24 | 1,53,786.48 |
| 18 | Derailing Switch | Set | 1.00 | 16,126.03 | 16,126.03 |
| 19 | Depth of 250 mm below bottom of sleeper for Turnouts | TRM | 1.00 | 884.56 | 884.56 |
| 20 | Depth of 300 mm below bottom of sleeper for Turnouts | TRM | 1.00 | 996.86 | 996.86 |
| 21 | For average lead up to 50m and lift up to 5m | cum | 330.00 | 151.5 | 49,995 |
| 22 | Extra over item no. 082011 for each additional average lead of 50m or part thereof when total average lead exceeds 50m, but up to 250m. Note: This item may be used only in exceptional circumstance under prior order on record. | Each | 650.00 | 28.24 | 18,356 |
| 23 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 310.00 | 28.14 | 8,723.4 |
| 24 | When distance of nearest quarry is more than 100 km and up to 150 km | cum | 1101.00 | 1,463.8 | 16,11,643.8 |
| 25 | When distance of nearest quarry is more than 150 km and up to 200 km | cum | 1101.00 | 1,710.73 | 18,83,513.73 |
| 26 | Spreading of ballast, from existing stacks available along formation on top or at cess, in required uniform thickness, compaction of ballast layer laid on new formation at all the locations with smooth wheeled power roller of 8-10 tonne capacity to sufficient number of passes to form consolidated ballast bed of approximately 250mm thickness to a width of 4m symmetrical to centre line of proposed track in correct line & level with all ascents & descents, as directed by Engineer in-charge. Note: Item is inclusive of (a) providing ramp for taking roller to formation and removing the same & making good formation after completion of work; (b) redistribution & leveling of excess ballast while rolling to obtain uniform plane cambered surface. | cum | 1872.00 | 48.51 | 90,810.72 |
| 27 | For sleeper density of 1660 sleepers per km | TRM | 720.00 | 335.55 | 2,41,596 |
| 28 | Maximum Shifting / Slewing up to 1 metre | TRM | 220.00 | 221.24 | 48,672.8 |
| 29 | Maximum Shifting / Slewing for more than 1 metre & up to 2 metres | TRM | 440.00 | 265.83 | 1,16,965.2 |
| 30 | For one shift ( 12 Hrs) | Each | 100.00 | 1,281.08 | 1,28,108 |
| 31 | For PSC sleeper Track with Sleeper Density of 1540 Sleepers/Km or more | TRM | 620.00 | 111.67 | 69,235.4 |
| 32 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 1240.00 | 147.4 | 1,82,776 |
| 33 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 620.00 | 113.38 | 70,295.6 |
| 34 | 1 in 12 PSC layout | Set | 2.00 | 15,946.88 | 31,893.76 |
| 35 | 1 in 8½ Derailing Switch | Set | 1.00 | 1,738.65 | 1,738.65 |
| 36 | Without Rail tensor | TRM | 620.00 | 47.35 | 29,357 |
| 37 | Drilling holes of 16mm to 22mm dia. on all types of PSC sleepers and fixing the dowels with adhesive of RDSO approved quality for fixing check rails & guard rails, as directed by Engineer in-charge. | Each | 168.00 | 402.37 | 67,598.16 |
| 38 | For 60 Kg Rails | RM | 1240.00 | 95.59 | 1,18,531.6 |
| 39 | For day time block working | TRM | 200.00 | 20.3 | 4,060 |
| 40 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 2.00 | 11,639.19 | 23,278.38 |
| 41 | Derailing Switch (Under Traffic Block Conditions) | Set | 1.00 | 3,655.41 | 3,655.41 |
| 42 | 60 Kg - 110/90 UTS - Outside Track | Each | 108.00 | 242.54 | 26,194.32 |
| 43 | 60 Kg - 110/90 UTS - On Running Line | Each | 48.00 | 310.82 | 14,919.36 |
| 44 | Outside Track | Each | 309.00 | 61.48 | 18,997.32 |
| 45 | On Running Line | Each | 235.00 | 78.7 | 18,494.5 |
| 46 | Drilling holes of specified size for bond holes with 7.2mm dia drill twist to correct spacing and location on 60kg/52kg rails on cess or under traffic block with contractor's tools and plant, equipment, consumable, labour etc complete as directed by the Engineer in charge at site. | Each | 208.00 | 44.75 | 9,308 |
| 47 | Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | Each | 275.00 | 75.84 | 20,856 |
| 48 | Extraction of jammed ERC by Heavy Duty Hydraulic Extractor with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in- charge. Heavy Duty Hydraulic Extractor for jammed ERCs (10 Ton capacity) shall be used as per RDSO's Specification No. TM/SM/6, dated 8.05.1991. | Each | 332.00 | 36.81 | 12,220.92 |
| 49 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 88.00 | 216.82 | 19,080.16 |
| 50 | I n Wagon where mechanical handling is possible and traffic block is required. | MT | 18.00 | 265.65 | 4,781.7 |
| 51 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 18.00 | 206.4 | 3,715.2 |
| 52 | For lead up to 500 metre. | MT | 66.00 | 410.32 | 27,081.12 |
| 53 | For lead beyond 500 metre and up to 1 Km. | MT | 35.00 | 529.6 | 18,536 |
| 54 | Extra to Items no. 171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 432.00 | 63.38 | 27,380.16 |
| 55 | For lead up to 500m | MT | 38.00 | 463.74 | 17,622.12 |
| 56 | For lead beyond 500 metre and up to 1 Km | MT | 38.00 | 675.16 | 25,656.08 |
| 57 | Extra to Items no. 171042 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 338.00 | 84.44 | 28,540.72 |
| 58 | From wagons during period of traffic block where handling by mechanical means is not possible | MT | 38.00 | 189.12 | 7,186.56 |
| 59 | From Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer. | MT | 51.00 | 156.8 | 7,996.8 |
| 60 | During period of traffic block | MT | 38.00 | 197.7 | 7,512.6 |
| 61 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer | MT | 385.00 | 178.3 | 68,645.5 |
| 62 | I n Wagon/Truck / trailer where mechanical handling is possible a n d traffic block is not required. | MT | 59.00 | 205.96 | 12,151.64 |
| 63 | For lead up to 500 metres | MT | 265.00 | 319.49 | 84,664.85 |
| 64 | For lead beyond 500 metre and up to 1 Km | MT | 223.00 | 474.19 | 1,05,744.37 |
| 65 | Extra to Items no. 172032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 2358.00 | 49.44 | 1,16,579.52 |
| 66 | Lead up to 5 Km | MT | 7.00 | 179.92 | 1,259.44 |
| 67 | Lead beyond 5 Km and up to 10 km | MT | 7.00 | 222.96 | 1,560.72 |
| 68 | Lead beyond 10 Km and up to 20 km | MT | 7.00 | 281.29 | 1,969.03 |
| 69 | Lead beyond 20 Km and up to 30 km | MT | 9.00 | 352.03 | 3,168.27 |
| 70 | Lead beyond 30 Km and up to 50 km | MT | 11.00 | 449.86 | 4,948.46 |
| 71 | Lead beyond 50 Km and up to 100 Km | MT | 13.00 | 662.06 | 8,606.78 |
| 72 | Lead beyond 100 Km and up to 150 Km | MT | 15.00 | 980.75 | 14,711.25 |
| 73 | Extra for every Km per MT beyond 150 Km over item no. 172047 | MT-Km | 1408.00 | 3.26 | 4,590.08 |
| 74 | Lead up to 5 Km | MT | 179.00 | 56.61 | 10,133.19 |
| 75 | Lead beyond 5 Km and up to 10 km | MT | 254.00 | 99.65 | 25,311.1 |
| 76 | Lead beyond 10 Km and up to 20 km | MT | 240.00 | 157.98 | 37,915.2 |
| 77 | Lead beyond 20 Km and up to 30 km | MT | 234.00 | 228.72 | 53,520.48 |
| 78 | Lead beyond 30 Km and up to 50 km | MT | 227.00 | 326.55 | 74,126.85 |
| 79 | Lead beyond 50 Km and up to 100 Km | MT | 315.00 | 538.74 | 1,69,703.1 |
| 80 | Lead beyond 100 Km and up to 150 Km | MT | 396.00 | 857.43 | 3,39,542.28 |
| 81 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km | 43138.00 | 3.26 | 1,40,629.88 |
| 82 | From DMT - During period of traffic block | MT | 193.00 | 178.18 | 34,388.74 |
| 83 | From Truck / Trailer | MT | 193.00 | 146.36 | 28,247.48 |
| 84 | From DMT - During period of traffic block | MT | 30.00 | 226.54 | 6,796.2 |
| 85 | From Truck / Trailer | MT | 30.00 | 162.77 | 4,883.1 |
| 86 | From DMT - Not involving traffic block or on lines, not opened to traffic | MT | 28.00 | 179.36 | 5,022.08 |
| 87 | From Truck / Trailer | MT | 28.00 | 234.02 | 6,552.56 |
| 88 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 68.00 | 478.8 | 32,558.4 |
| 89 | All type of PSC sleepers | MT | 92.00 | 516.47 | 47,515.24 |
| 90 | P.Way fittings of all types and other similar loose items | MT | 16.00 | 414.33 | 6,629.28 |
| 91 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 2.00 | 6,908.11 | 13,816.22 |
| 92 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 2.00 | 5,917.1 | 11,834.2 |
| 93 | Stop Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 2.00 | 6,908.11 | 13,816.22 |
| 94 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each | 2.00 | 8,361.59 | 16,723.18 |
| 95 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 90.00 | 846.09 | 76,148.1 |
| 96 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 230.00 | 2,118.4 | 4,87,232 |
| 97 | Tractor with Trolley for local transportation or other misc. works. | Hour | 200.00 | 599.84 | 1,19,968 |
| 98 | Arranging labour as and when required by the Engineer in charge, for various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. as per specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the Engineer in charge. Note: Item shall be operated with prior approval of concerned Sr. DEN / DEN in charge. | Day | 400.00 | 753.26 | 3,01,304 |
| Schedule total | ₹1,72,62,622.73 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .