Constrction of type V Qtr, for principal Govt Degree College Karsog Distt Mandi HP (ShC/o Building portion I/c ESAnd SI, 50 user septic tank, rain water harvesting tank, boundary wall and gate)

Amount

Excavation in foundation trenches etc. in earth work in all kinds of soils such as pick work , jumper work, pick work,pick jumper blasting work, blasting work in soft and hard rock conglomrate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Excavation In drain and channels etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work , pick jumper blasting work , blasting work in soil and hard rock conglomerate rock or saturated soil and its intermediate class including cheisling /wedging out rock(where blasting is prohibited) or any other mixed variety of soil,dewatering and /or removal of slush and other incidentals lifts upto any heights, stacking the excavated soil with in all leads and lifts clear from the edge of excavation and then returing consolidating each deposited layer by ramming and watering and then depositing of all surpluse excavated earth at specified places as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

Providing and laying Mechanical mixed and vibrated cement concrete 1:3:6 (One cement: three sand: six graded crushed stone aggregate 40 mm (forty millimeter) nominal size and curing complete excluding cost of centering and shuttering in foundation and plinth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying Mechanical mixed and vibrated cement concrete 1:3:6 (One cement: three sand: six graded crushed stone aggregate 20 mm (twenty millimeter) nominal size and curing complete excluding cost of centering and shuttering in foundation and plinth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:4:8 (one cement :four sand :eight graded crushed stone aggregate 40 mm nominal size)( Forty milimetre size) and curing complete excluding cost of form work in foundation and plinth as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm(Three point fifteen millimeter) thick welded with angle iron in frame 30x30x5mm(Thirty millimeter into thirty millimeter into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and bellies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in situ-reinforced concrete and pain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge in:-

Foundation, footing basis of columns etc. and mass concrete .

Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc upto any thickness.

Vertical surface such as walls(any thickness) and the like including attached pilasters, buttersses plinth and string courses and the like

Columns, pillars, Posts and struts, Square, rectangular or polygonal in plan

Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor.

Stair cases with sloping or stepped soffits excluding landing

Edges of slabs and breaks in floors and walls in any width.

Providing and laying Mechanical mixed and vibrated cement concrete 1:6:12 (One cement: six sand: twelve graded crushed stone aggregate 40 mm nominal size (forty millimeter) and curing complete excluding cost of centering and shuttering in foundation and plinth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:5:10 ( one cement : five sand : ten graded crushed stone aggregate 40mm.(Forty millimetre) mechanically mixed and curing complete excluding the cost of form work in foundation and plinth as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying M-20 grade of cement concrete mechanically mixed and vibrated with minimum cement content 320Kg./Cum.(Three Hundred Twenty Kilogram Per Cubic Metre) with crushed stone aggregate 20mm(Twenty milimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Foundation, footing basis of columns etc. and mass concrete .

Suspended floors, roofs ,landings and shelves and their support, balconies, beams, girders, breasumers and cantilevers upto all floor level.

Columns, pillars posts and struts square rectangular polygonal in plain upto all floor level.

Stair cases (except spiral stair cases) excluding landing but including preparing of the top surface and finishing of nosing upto floor all level.

Providing and laying upto all level reinforced cement concrete 1:2:4 (one cement : two Sand :four graded crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and vibrated to give an smooth and even surface including centring and shuttering and reinforcement for RCC work in chajja including finishing exposed surface with cement nortar 1:3 (one cement:three sand to smooth and even surface centring/ form work and curing complete excluding the cost of rain forcement cement like as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals

Providing and laying upto all level reinforced cement concrete 1:2:4 (one cement : two Sand :four graded crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and vibrated to give an smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the like as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to any level as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Providing in RCC work smooth finishing of exposed surface with cement mortar 1:3 (One cement:three sand) complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Brick work using common burnt clay building bricks with Cement mortar 1:6 (One Cement : Six Sand) second Class Bricks as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals .

In foundation and plinth

Superstructure above plinth level upto all floor level .

Half brick masonry in common burnt clay building bricks in cement mortar 1:4 (one Cement :Four Sand) (2nd Class Brick)in super structure above plinth level upto all floor level as per the direction of Engineer-in-chargeincluding carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing 12 mm (twenty millimeter) thick and 100 mm (Hundred millimeter) wide palmet with 25 mm (twenty five millimeter) dia wooden curtain rod and bracket including 25x3 mm (twenty five into three millimeter) MS flate at 10 cm (ten centimeter) long and plug extra complete in first class wood as per the direction of Engineer-in-chargeincluding carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws Plain grill as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing aluminium. sliding door bolts with nuts and screws etc. complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

300x16 mm .(Three hundred millimeter x Sixteen millimetre)

250x16 mm .(Two hundred fifty millimeter x Sixteen millimetre)

Providing and fixing aluminium Tower Bolts (Barrel type) with necessary screws & welding etc. complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

300x10 mm .(Three hundred fifty millimeter x ten millimetre)

200x10mm (Two hundred millimeter x ten millimeter)

Providing and fixing 50mm (fifty millimetre) bright finished brass cup board or ward robe knob as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing aluminium handles with the necessary screws etc. complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. .

125 mm .(One hundred twenty five millimeter)

100 mm. (One hundred millimeter)

Providing and fixing 150mm (one hundred fifty millimetre) oxidized M.S. double acting spring hinges bright finished with necessary screws etc. complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing bright finished hard drawn brass hooks and eyes 250 mm (two hundred fifty millimeter) as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. safty hooks and staples with necessary screw etc. complete 115 mm (one hundred fifteen millimeter) size as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 12 mm (twelve millimeter) thick prilaminated board both side bwp phenol bonded exterior / interior grade panalled shutters with frame of 1st class deodar wood including bright finished /black enamelled iron butt hinges with necessary screws 40 mm (forty millimeter) thick frame. complete as per specification and as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Providing and fixing 19mm (nineteen millimeter) thick water proof termite resistant commercial board box and its shelves including 19mm (nineteen millimeter) thick commercial board shutter with back side of the cabinet of 8mm (eight millimeter) thick ply and cut portion of the shelves to be finished with 6mm (six millimeter) hard wood edging complete including piano hinges and other accessories as per direction of Engineer-in-Charge and specification including carriage of materials with in all leads, lifts and other incidentals .

Providing and laying automatic fibro hydraulically compressed and polished silver grey shade terrazzo tiles 300 mmx300mmx25mm (three hundred millimeter into three hundred millimeter into twenty five millimeter) ISI marked IS No. 1237-1980 of approved shade laid in flooring treads of steps and landing on the bed of 25 mm ( twenty five millimeter) avarage thickness of cement mortar 1:6 (one cement:six sand ) jointed with neat cement slurry mixed with pigment to mate the shade of tiles wherever required including eubbing and polishing complete as per direction of Engineer-in-Charge and specification including carriage of materials with in all leads, lifts and other incidentals .

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring 300 x300 mm.(three hundred xthree hundred millimeter) size treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: : 3 sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals .

Providing and laying automatic fibro hydraulically compressed and polished medium shade terrazzo tiles ISI marked IS No. 1237-1980 of approved shade laid in skirting and risers of steps upto any height on a bed of 10 mm average thickness of cement plaster 1:3 (one cement :three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles wherever required including rubbing and polishing complete as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

White glazed tiles 6 mm (six millimeter) thick having size 152 mmx152 mm ( one hundred fifty two millimeter into one hundred fifty two millimeter)in skirting ,riser,dado and steps 12 mm (twelve millimeter) thick cement mortar 1:3 (one cement:three sand) and jointed with slurry complete as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and laying Marble work (Table rubbed and polished) in flooring 20 mm (twenty millimeter) thick base in cement mortar 1:3 (one cement:3 sand ) including jointing with cement mortar 1:2 (one white cement:2 marble dust) with an mix the pigment to match the shade of the marble 20 mm (twenty millimeter) thick makrana marble. as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Marble chips skirting or dado in all height rubbed and polished to granolithic finished with under layer 14 mm (forteen millimeter) thick cement plaster 1:3 (one cement:three sand) and top layer 20 mm (twenty millimeter) thick marble chips of required size laid in cement morble power mis 3:1 (three cement:one marble power by weight ) in proporation 4:7 ( four cement:seven marble chips by volume) silver gray shade pigment with approximate 50 % (fifty percent) white cement and 50% (fifty percent) ordinary cement (in top layer only) upto all floor level.as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

40mm (forty millimeter) thick cement concrete flooring with cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre nominal size) laid in one layer finished with a floating coat of neat cement 40mm (forty millimeter) thick complete as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and fixing on wall face C.I. rain water pipe 100 mm (hundred millimeter) diameter including filling joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (one cement:two sand) upto all floor level as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and fixing cast iron holder bats clamps of approved design to C.I or S.C.I pipe embedded in and including cement concrete blocks 100mm x100mm x 100mm (one hundred millimeter into one hundred millimeter into one hundred millimeter) of 1 : 2 : 4 ( one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeter) nominal size including cost of cutting holes and making good the walls for 100mm (one hundred millimeter) nominal diametre/ size) pipe. as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and fixing on wall face C.I. accessories for rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (one cement:2 sand) complete as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

C.I palin bend 100 mm (one hundred millimeter) diameter

Providing and fixing angle iron frame manufacture from M.S.single iron section 40x40x5 mm (forty into forty into five millimeter) thick and MS flate 50x5 mm (fifty into five millimeter) including hinges ,jamb,beed and if required angle thresold of mild steel angle 25x25 mm (twenty five into twenty five millimeter) welded of rigidly fixed by mechanical means, lugs with split end tails to each jambs including steel butt hinges 2.5 mm (two point five millimeter) thick provision for locking arrangement and shock observer as specified and printing a coat of steel primer after pretreatment of surface.as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Door with single Reabet

Door with double Rebate

Providing and fixing MS channel door/window frame manufacture from M.S. section ISMC 75x40x5 mm (seventy five into forty into five millimeter) and MS flate 75x5 mm (seventy five into five millimeter) if required in middle frame including hinges ,jamb,beed and if required angle thresold of mild steel angle 25x25 mm (twenty five into twenty five millimeter) welded of rigidly fixed by mechanical means, lugs with split end tails to each jambs including steel butt hinges 2.5 mm (two point five millimeter) thick provision for locking arrangement and shock observer as specified and printing a coat of steel primer after pretreatment of surface.as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25X25X5mm (twenty five into twenty five into five millimeter) thickness including hinges jamb,lock jamb, beed and if required angle thrashold of mild steel angle 25X25 mm (twenty five into twenty five millimeter) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimeter) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40 mm (forty millimeter) thick 2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g (eighty five gauge). With wire of dia 0.56mm (zero point fifty six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. As per architectural drawing for this work comlete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing ans fixing steel glazed door, window and ventilator of standared rolled steel section,jointed mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimeter) lugs 10 cm (ten centimeter) long embedded in concrete block 15 cm x10cmx10 cm (fifteen centimeter into ten centimeter into ten centimeter) size of 1:3:6 (one cement: three sand: six graded aggregate of 20 mm (twenty millimeter) nominal size or with wooden plugs and screw or rawl plug and screws or with fixing clips or with bolts and nuts as required including providing and fixing of projecting hinges, handles,peg style, bolting device locking arragement, spring catch and ficxing of 4 mm (four millimeter) thick glass paners with glazing clips and specials metal sash putty of approved make complete including applying coat of red lead paint as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Side hung window

Fixed steel window

Providing and fixing steel wire gauge window and ventilator of standared rolled section joint mitred and welded with window including all leads, lifts and carriage of material and other incidental.

Providing and fixing railing of stair case having baluster of 40x40 mm (forty millimeter into forty millimeter) square /rectangle hollow MS pipe (ISG-16, (sixteen) gauge with clear height 85 cm (eighty five centimeter)@60 cm(sixty centimeter) including painting in CC steps and jointing with electric gas welding at top along with rail of hollow MS pipe 60x10 mm (sixty millimeter into Ten millimeter)(ISG-16) vertical baluster welded /jointed with each other with two no. MS flat 50x5 mm (fifty millimeter into five millimeter) complete with applying a primming coat of red oxide paint as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Painting two coats (excluding priming coat) on new steel and other metal surfces surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel paint other than whiteas per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other forein matter sand papering and knotting ready mixed paint brushing wood priming pink of approved brand and manufacture (Nerolac/Asian Shalimar) conforming to IS: 3536-1966 brushing as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease,dirt and and other foreign matter sand papering and stopingready mixed paint white as per direction of Engineer-in-including carriage of materials within all leads, lifts and other incidentals.

6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) as per the directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all floor level includingarises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand)as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals

15mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:6 sand) as per the direction of Engineer-in-Charge including carriage of materials within all leads, and lifts other incidentals.

White washing with lime on undecorated wall surface (two coat) to give an even shade including throughly brooming the surface to remove all dirts,dust, mortar drops and loose scale the lime wash and other foreign matter on ceiling as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

White washing with lime on undecorated wall surface (two coat) to give an even shade including throughly brooming the surface to remove all dirts,dust, mortar drops and loose scale the lime wash and other foreign matter on wall as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture of and of required shade of undecorated wall surface to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Finishing with water-proofing cement paint of approved brand and manufacture of required shade of undecorated concrete/masonry/asbestos cement/plastered wall surface (Two coat) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials upto all floor level in including carriage of material in all lead and liftsas per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm (Seventy Five millimetre) thick (unconsolidated) bed of dry brick/stone aggregated 40mm (Forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing plinth protection 50mm (Fifty millimeter) thick in cement mortor 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeter) nominal size as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Constructing course rubble dressed "U" shape open surface drain with side wall 15X22cm (Fifteen into twenty two centimeter) in cement mortor 1:6 (one cement: six sand) and in side plastering with cement plaster 1:3 (one cement : three sand ) including earth work and laying 10cm (Ten Centimetre) cement concrete 1:5:10 (one cement :five sand:ten graded crushed stone aggregate 40mm (Forty millimetre) nominal size) and 7.5cm (seven point five centimeter) cement concrete 1:2:4(one cement :two sand ;four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) and finishing with a floating coat of neat cement and curing complete as per standard design as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying Kota stone slab 25 mm (twenty five millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:4 (one cement : four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in positiobn and applying a priming coat of red lead paint as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals in:

Trusses and trussed purlins in buildings including carriage of materials with in all leads,lifts and other incidentals.

In grating framed guard bars ladders, railing brackets and similar works

Providing and fixing 0.60mm (zero point sixty millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point sixty millimeter) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. carriage of material in all leads and lifts as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15cm (fifteen centimeter) wide 45cm (forty five centimeter) over all semi circular plain GI sheet gutter with iron brackets 40x3mm (forty into three millimeter) size bolts and nuts and washer etc. including making necessary connection with rain water pipe complete as per desisgn:63mm (sixty three millimeter) thick as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing MS BP sheet 1.66 mm to 2mm (one point sixty six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling i/c cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer in charge ( Base members of steel work shall be measured and paid seperetely). as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying to wall ceiling and floor galvanised mild steel tubes (Medium grade) I.S. No. 15450-2004 tube fittings and clamps including making good the wall, ceiling and floor:- as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

15mm (fifteen millimeter) nominal bore

20mm (twenty millimeter) nominal bore

Providing and laying in trenches galvinised Mild steel tube (Midum grade) tube fitting,and clamps (earth work to be measured and paid separtly ) 25 mm (twnty five millimeter) bore complete as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Making connection of Galvanised steel distribution Branch with galvanized mild steel main 20 mm to 40 mm (twenty millimeter to forty millimeter) nominal bore by providing and fixing tee including cutting and trenching the pipe as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection and 15mm dia brass ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 2000 L(two thousand litres) net capacity tank as per the direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.

Providing and fixing sand cast/cast iron spun spiogot and socket soil, waste and ventilating pipes(Lead caulked joints to be measured and paid separately) as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Providing and fixing sand cast iron/cast iron spun fittings and accessories:- as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Bends of required degree any radious with oval access door insertion rubber washer 2mm (two millimeter) thick bolts and nuts complete

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Single equal branch of required degree of required degree with oval assess door insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Double equal branch of required degree with ovel access door insertion rubber washer 3mm (three millimeter) thick bolt and nuts complete as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Single unequal branch of reequired degree (plain) with out access door interior rubber washer 3 mm (three millimeter) thick bolt and nut complete (100x75 mm) (one hundred into seventy five millimeter) as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Double unequal branch of reequired degree (plain) with out access door interior rubber washer 3 mm (three millimeter) thick bolt and nut complete (100x75 mm) (one hundred into seventy five millimeter) as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing C.I Collar as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Providing and fixing Cast iron Cowl as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Providing and fixing Heel rest bend as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Providing and fixing M.S. stay and clamps for sand cast iron/cast(spun) iron pipes. as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Providing and fixing 100 mm (one hundred millimeter) dia cast iron floor trap of self cleaning design with sand cast iron screwed /hinged gratting with or without vent arm complete including cost of cutting and making good the walls and floor complete as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing lead caulked joints to sand cast rion/ cast(spun) iron pipes and fittings including testing of joints as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size.

100mm (one hundred millimeter) nominal size.

Providing and fixing vitreous china water closet squatting pan( Indian type WC pan) size 580mm nominal (earth work, bed concrete, foot rest and trap to be measured and paid for separately:-Orrissa pattran. No. 20001 in white shade ISI marked as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous china wash down water closet( European Type WC pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement:one sand)( sheet and cover to be measured and paid for separately)Anglo Indian (Universal closet) PAN No. 20012 in white shade ISI marked as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plastic seat (solid /hollow type) and cover for wash down water closet with C.P.brass hinges and rubber buffers. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10.00/12.50/15.00 ltrs (ten point zero/twlve point fifty/fifteen point zero litters) Vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve less syphon, 15mm (fifteen millimeter) nominal size brass ball valve with polythene float, C.P. brass handle, unions and couplings for connections with inlet, outlet and over flow pipes, 40mm (forty millimeter) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet(overflow pipe to be measured and paid for separately) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100mm (hundred millimeter) size sand cast iron 'P or 'S' strap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1(one cement: one sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing G.I inlet connection for flush pipe with WC pan complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:Flat back 550 mmx400mm.(five hundred fifty into four hundred millimeter) pedestal No. 10001 of hirdware in white shade as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing viterious china 600x4500x150 mm (six hundred into four thousand five hundred into one hundred fifty millimeter) nominal size Kitchen sink woth G.I or M.I brackets painted with including cutting holes in walls and making good the same but excluding the fitting complete. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing rubber plug for wash basin or sink 32 mm (thirty two millimeter) diameter complete. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing CP Brass waste wash basin or sink:- 32mm (thirty two millimeter) dia as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.I union for wash basin or sink 32 mm (thirty two millimeter) diameter complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing bottel trap (heavy duty make as ISI mark No. 8931& 8934 for wash basin or sink 32 mm (thirty two millimeter) diameter complete. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing lead waste pipe for wash basin or sink 32 mm (thirty two millimeter) diameter including brass check nut complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 100 mm (one hundred millimeter) diameter C.P heavy duty grating for gully floor nahni trap as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) bevelled edge miror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600mm x 20mm (six hundred into twenty millimetre) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

Providing and fixing 600mmx120mm (six hundred millimeter into one hundred twenty millimeter) glass shelf with C.P. brass brackets and guard rial complete fixed to wooden plugs with C.P. brass screws. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing toilet paper holder C P Brass as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

Providing and fixing C.P Brass shower rose with 15 mm to 20 mm inlet 150 mm (fifeen millimeter into twenty millimeter into one hundred fifty millimeter) diameter complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P Brass bib tap with capsten head 15 mm (fifteen millimeter) nominal bore diameter as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P Brass two hole basin mixing faucet 15 mm (fiteen millimeter) nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P Brass stop cock superior or heavy duty 15 mm (fiteen millimeter)nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing C.P PVC connection pipe with brass union 45 cm (forty five centimeter) long and 15 mm (fifteen millimeter) nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. .

Providing and fixing Brass full way valve with wheel complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

15 mm (fifteen millimeter) nominal bore

20 mm (twenty millimeter) nominal bore

Providing and fixing C.P angle valve 15 mm (fifteen millimeter) nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying (To slope and level) and joint with stiff mixture of cement mortar in proportion 1:1 (one cement:one sand) salt glazedstone ware pipe Grade A of 150 mm (one hundred fifty millimeter) diameter as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying mechanical mixed and vibrated cement concrete 1:4:8(one cement: four sand: eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size bedded for stone wire pipe 150 mm (one hundred fifty millimeter) diameter including necessary for work and curing complete.40 mm (forty millimeter) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with RCC top slab in 1:2:4 mix ( one cement: two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size, foundation concete 1:4:8(one cement : four sand : eight graded crushed stone aggregate 40mm (forty millimeter) nominal size inside plastering 15mm(fifteen millimeter) thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of net cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeter) nominal size finished smooth complete including curing and testing:- in side size 800mm x 800mm (eight hundred millimeter into eight hundred millimeter) and 500mm (five hundred millimeter) deep including C.I cover with frame (light duty single seal : Pattern -I) 455mm X 610mm (four hundred millimeter into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 Kg (thirty eight kilogram) . ( weight of ceover 23Kg (twenty three kilogram) and weight of frame 15Kg (fifteen kilogram) wtih 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement motor 1:3)(one cement : three sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Constructing manhole with RCC top slab in 1:2:4 mix ( 1cement:2sand:4graded crushed stone aggregate 20mm nominal size), foundation concete 1:4:"8(1cement:4sand:8graded crushed stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement: 3sand) finished with a floating coat of net cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded crushed stone aggregate 20mm nominal size) finished smooth complete including curing and testing:- in side size 800mm x 800mm and 1.000 metre deep including C.I cover with frame (light duty single seal : Pattern -I) 455mm X 610mm internal dimensions total weight of cover and frame to be not less than 38 Kg .( weight of ceover 23Kg and weight of frame 15Kg ) wtih 200mm thick walls of brick masonry using common burnt clay building bricks in cement motor 1:3)(1cement:3sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 (one cement :five sand)and water tight C. I. cover with frame of 300mmx300mm( three hundred into three hundred) size (inside) the weight of cover to be not less than 4.53kg (four point fifty three kilogram) and frame to be not less than 2.72kg.(two point seven two kilogram) square mouth trap 150 x 100 mm ( one hundred fifty into one hundred milimetre)size P or R type as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing fiber glass bath tub of standared size with handle including integral over flow and with a pair of 200mm (two hundred millimeter) CP Brass Pillar taps, 400 mm (four hundred millmeter) CP brass waste 32 mm (thirty two millimeter) over flow pipe CP brass chain with 40 mm (forty millimeter) rubber plug 40 mm (forty millimeter) M.I. or CP brass trap with union complete. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Stone masonary in cement mortar for sub structure complete as per drawing and technical specification clause 702,704,1202 and 1204 in cement mortar 1:6 (One cement :six sand ) R/R masonary with in all lead and lifts and other incidentals

C/o dry random rubble masonery /polygonal masonry(un course/brought to course in wall with hard stone of approved quality in foundation and plinth laid dry, well bonded ,faced with slected stone and built with bond or through stone evenly placed at the rate of two square meter as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Boulder filling with hand packed as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providiing and fixing high pressure PVC spigot and socket waste pipe and ventilating pipe ISI marked including fixing with approved adhesive complete. 110 mm (one hundred ten millimeter) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providiing and fixing PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm dia as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing PVC bend ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimeter) dia as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (One cement : Five sand ) C.I. Cover with frame (light duty ) 355mm x 610mm (Three hundred fifty five millineter into six hundred ten millimeter) internal dimensions total weight of cover with frame to be not less than 38kg (thirty eight kilogram) weight of cover 23 kg.(twenty three kilogram) and weight of frame 15kg (fifteen kilogram) R..C.C top slab with 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeter) nominal size foundation concrete 1:5:10 ( One cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size inside plaster 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Inside dimensions 455 mm x 610 mm x 450 mm (four hundred fifty five millimeter into six hundred ten millimeter into four hundred fifty millimeter) deep single pipe line.as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Supplying cast iron cover without frame for manholes as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

For frame of internal dimension 455mmx610mm (four hundred fifty five millimeter into six hundred ten millimeter) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg.(twenty three kilogram) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded crushed stone aggregate 40mm (forty millimeter) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1 : 4 : 8 ( one cement : four sand : eight graded crushed stone aggregate 40 mm (forty millimetre nominal size) and curing complete excluding cost of form work in foundation and plinth as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (one cement:four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub-base concrete floor to be paid for 40mm (forty millimeter) thick inter locking blocks including carriage of material within all leads and lifts and as per HP.PWD. Specification of 1990 volume-I and asas per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Half brick masonry in common burnt clay building bricks in cement mortar 1:3 (one Cement :three Sand) (2nd Class Brick)in super structure above plinth level upto all floor level as per the direction of Engineer-in-chargeincluding carriage of materials with in all leads, lifts and other incidentals .

DALIP SINGH GOVT CONTRACTOR

CHOGINDER THAKUR GOVT CONT