IMPLEMENTATION OF SOUND AND LIGHT SHOW 3D PROJECTION MAPPING SHOW FOR DEVAL AT MANDORE(PHASE-I)

Amount

A) Artistic Direction & Content Generation.

Cost including VFX, generation of synchronized rich media in 2 & 3D content including animation, multilayering etc ready for transfer on to media servers for a maximum of 20 minutes.

Cost of Music /sound track production in two languages with SFX etc for multi channel 3 D immersive sound effect duly mixed and ready for transfer on to Hard Discs.

Cost of multiple media server splitting, mapping and programming of content with onsite testing, alignment & integration.

Cost of designing, cueing and programming DMX based intelligent luminaries and system integration.

B) Audio systems.

Supply installation and fixing Equipment Rack - 19 “standard 36 U Rack with all required accessories. Earthing community kit, mounting bracket, cable manager, support angle, equipment shelf, mounting hardware, fan housing units etc, Ventilated top and bottom covers with attractive styling. It has Removable side panels with slam latches for easy access. (Make : MTS/Netrack/APW

Complete audio solution with Speakers woofers and suitable amp and its accosories. Speaker should be weatherised. (Make : JBL/Bose/EV

Audio Interface Hybrid FireWire and USB Audio Interface with software license. Eight 24-bit analog quarter-inch (TRS) inputs and Eight 24-bit analog quarter-inch (TRS) outputs, Operates on all analog I/O at standard sample rates up to 192 kHz, MIDI I/O,Auto-switching international power supply. (Make : Focusrite/Steinberg/Motu

C) MAGING/EFFECTS/LIGHTING Projection System, Sky Launchers etc

DLP projector of with range from 12,000 ANSI lumens to 16000 ANSI Lumens, having resolution WUXGA with contrast ratio 10,000:1 and lux level on the façade surface, it should be 70-100 lux minimum. (Make : Christie/ Barco/ Panasonic)

Digital Zoom Lens for above projectors. (Make : Christie/ Barco/ Panasonic)

Projection housing enclosure with DEC Control Interface for setup and monitoring of temperature, humidity and status indicators. Power control circuit with PID Management system compatible with the projection housing unit and display unit. (Make : Customised)

Control panel with Independent Digital Led Display for Monitoring of Temperature and Humidity , exhaust control circuit, heating circuit, and power distribution for the projectors.(Make : RDM)

Assembly and mounting of projector as per site plan with cables, mounting brackets and tilt/pan arrangement systems for projection layout. (Make : Customised)

Lasers 10 watts 3000 mW / 637 nm LPS 3000 mW / 520 nm LPS 4000 mW / 445 nm LPS Eye-Magic 60 kpps scanning Safety shutter Interlock dustfree optic area processor supported electronics optimized airflow ILDA Interlock mechanical shutter ILDA IN/OUT (Make : LPS/ HB Laser/ Kvant)

Laser Show Software LPS-Real TIME Pro or equivalent. (Make : LPS/ LAYU/ Pangolin)

Laser protection housing 20 - 30 °C with an accuracy of 0.3°C inside, independent from the ambient temperature in a temperature range of +5°C up to 40°C with external chiller. (Make : Customised)

Sky Launcher Luminaries MSD Platinum 15R (8,000K) (300W) 1 color wheel with 14 dichroic color filters plus Double shutter blades, 0.3~20 F.P.S and 1 Prism/Frost Wheel with 1 x CTO, 1 x frost and 1 x 8-facet prism plus white Pan 540º. Tilt of 270º with auto position correction, speed adjustable and lock mechanism. (Make : Martin /LBT/ PR Lighting/ Canara)

Weather proof dome housing for beam lights of suitable size with heat dissipation unit and acrylic covering to pass the beam. (Make : Customised)

D) CONTROL ROOM Supply installation testing and commissioning of following:

Program server with interfaces as per the technical specs of 8 GB RAM,Intel® C612 chipset, compatible audio video interface Graphic card with DP Outs and 3U Rack mountable PC complete with keyboard mouse etc. Integrated Intel I217 Gigabit Ethernet controller. Quad channel; Up to 256GB10 2133MHz DDR4 ECC RDIMM memory. Support for 2 PCI Express® x16 Gen 2/Gen 3 graphics cards up to 300W. (Make : Dataton/ SMC/ Asus/ Dell)

Light control Software , 1 universe licence and DMX interface. (Make : Avolite/ MPC V3/ Canara)

Watchout :- A multi-display production and presentation Software that delivers a remarkable impact. Watchout- version 6 Media Servers licence keys with 4 display monitor output. (Make : Dataton/ Coolux/ Modulo)

DMX splitter with 3 and 5 pin XLR points for programming of lights. Power: AC 100-240V. Protocol: DMX-512. DMX input and 8 isolated output.(Make : Avolite/Lite Putter/ Eurolite/ Canara)

Primary program server with interfaces as per the technical specs of 16 GB RAM. (Make : Dataton/ SMC/ Asus/ Dell)

24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x 1080 at 60 Hz having Brightness 250 cd/m² (typical). CONNECTIVITY 1 Digital Visual Interface connectors (DVI-D) with HDCP 1 Video Graphics Array (VGA) 1 USB 2.0 upstream port 2 USB 2.0 downstream ports DC power connector for Dell Sound bar (Make : Dell/Samsung/ HP)

Supply, installation testing and commissioning of 12 KVA, true on-line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batteries, with a 15-20 mins backup time on full load with MS open MS Battery rack and Nyvin cable. (Make : Eaton/Emerson)

DVI D, HDMI, VGA, USB etc CABLES.For All above Arrangements/Equipments (Make : Kramer/Extron/ Dell)

Small Business 24 port Gigabit switch and 2 x Mini GBIC fibre uplinks. Standards:-IEEE 802.3, 802.3u, 802.3x, 802.3ab. Cabling Type:-Category 5 and multi-mode fibre. Power:-100-127VAC/200-240VAC, 1.0A/0.5A, 50-60 Hz. Operating Temperature:-32 to 104ºF (0 to 40ºC). (Make : Cisco/ Dlink/ Netgear)

DVI/ HDMIExtender Transmitter Using Cat6 Cable.(Make : Extron/Kramer/ Milestone)

DVI/ HDMI Extender Receiver Using Cat6 Cable. (Make : Extron/Kramer/ Milestone)

300 mtrs Cat5e/6 twisted unshielded/ shielded pair cable. (Make : Extron/Kramer/ Dlink)

Speaker cable 16 AWG 2C ATC as per requirement. (Make : Beldon/ Krystal/ Extron)

E) Cabling & Earthing 1. Electrical Panel

a. 200 A MCCB 35 KA 3 Pole Incommer b. 100 A MCCB for UPS IN c. 100 A MCCB for UPS OUT d. Digital Metering Set e. LED indicator light f. 32 A DP MCB g. 6-25 Amp SPMCB h. Panel Stand i. PANEL BODY WITH COPPER BUS BAR AND WIRING Supply and laying of one number cable of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. / on surface / in pipe / conduit as required. (Make : Customised As per Requirement)

3C x 1.5 mm² PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked, as required. (Make : Havells/Polycap /Kei/ RR)

3C x 2.5 mm² PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked, as required. (Make : Havells/Polycap /Kei/ RR)

3C x 4mm² PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked as required. (Make : Havells/Polycap /Kei/ RR)

3C x 6mm² PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked as required. (Make : Havells/Polycap /Kei/ RR)

3C x 16mm² PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked as required. (Make : Havells/Polycap /Kei/ RR)

Field Junction and distribution box with 6-32 A MCB (Make : Customised As per Requirement)

100 x 40 mm race way in the control room. (Make : Customised )

Supply of 100 x 100 mm water proof box for beam lights.(Make : Customised )

DMX /RS485 cable, 22 AWG stranded (7x30) tinned copper conductor, insulated, twisted pairs, overall shield (100% coverage) PVC outer jacket as required. (Make : Kramer/ Krystal/ Extron/ Dlink/ Polycap)

Earthing with Copper earth plate 600 mmx600x3mm thick including all accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. complete with charcoal and salt as required as per BIS specifications. (Make : Customised )

15 mmx5mm copper strip on surface/recess for connections etc. as required. (Make : Customised )

6 SWG GI Wire on surface/recess/in ground for loop earthing along with existing cable as required. (Make : Customised )

S.I.T.C. 25 mm Pvc conduit pipe in existing trench and surface on wall with bend, saddle, PVC sleeve, screw and required accessory. (Make : Customised )

Supply and fixing of control room fittings like tube lights, power points and light points. (Make : Customised )

Operation, maintenance & Security of Light & Sound system for 3D projection mapping at mandore Udhyan including all accessories & repairing required if any with providing of operator for operating sound & light show (4 year)

Canara Lighting Industries Pvt Ltd.,

TRICOLOR INDIA SCHAUSPIEL PRIVATE LIMITED

CS Direkt Events And Exhibitions Pvt. Ltd.