REPAIR TO COMPOUND WALL DRAIN AND PATHWAY AT NAD AND ABE PARK PARK AREA UNDER AGE BR II OF GE ND VISAKHAPATNAM

Amount

SCHEDULE'A' PART-I:B/R WORKS

Demolition of brick work or stone /boulder masonry built in cement mortar of any description incl quions arches but excluding aslars facing complete all as specified and directed by the Engr-in-charge.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6

-Ditto- all as per item No 2 here in before but except bricks complete all as specified and directed.

M&L for random rubble masonry work brought up to course solidly hearted in cm (1:6).

M&L for walling of random rubble masonary uncoursed,well bonded ,bedded and soildly hearted built in cement moror 1:6 but except stone

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills ,kerbs and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.

Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

S&F in repair PVC (SWR) pipes single socketed in any length 75mm bore for weep holes complete all as specified and directed.

Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified .

M&L for rendering 15mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:4 and finished even and fair without using extra cement

M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) finished fair and even complete all as specified and directed.

M&L for raking out joints/ pointing to masonry or brick-work in single detached joints for flashing, etc.

Preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer on wall complete all as specified and as directed by Engr-in-Charge

M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of cement base paint complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for complete removal of existing finish on walls including column etc. including filling of holes and cracks with putty on wall as per manufacturer's instructions and applying two coat of weather proof acrylic exterior paint (100% Acrylic)over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Demolition of reinforcement cement concrete in reinforcement and in any position not otherwise specifically provided complete all as specified and directed.

M&L for precast cement concrete 1:1.5:3,type A1 (using 20 mm graded stone aggregate) in landings, cover slabs for drain etc. and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions

M&L Reinforced Cement Concrete type A1 1:1.5:3 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings foundation beams, plinth beams, bases for columns, etc.basement slabs, under reamed piles and mass concrete , complete all as specified.

M&L Reinforced Cement Concrete type A1 1:1.5:3 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts.complete all as specified.

M&L mild steel TMT bars 10 mm dia and over,cut to length, bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

Removing demolition of material to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 410-W (Gde E250) quality-B

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; gates, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165

S & F Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riverting etc., and similar work confirming to Fe 410 - O or Fe 310 - O

M&L for Mild steel screw bolts of 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n.exc 15cm long

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L preparation of old steel surfaces and applying one coats of synthetic enamel paint of any description over 10 cm width and girth complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for 20mm thick Granite work (table rubbed and polished) in decorative shelves, steps, pillars, jambs, cooking platforms, stages, etc with chemfering of edge and like inn CM 1:4 including pointing in white cement (1:2) using marble dust with mixture of pigment to match with shade of granite including grinding & mirror polishing with and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

S & F Aluminium Composite Panel sheet of 3 mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core over aluminium frame including screws ,joints etc complete all as specified and directed. Make:- (a) Aludecor, (b) Alstrong, (c) Alucobond, (d) Alstone, (e) Viva Note:- Aluminium frame will be measured and paid separately.

S & F in repair mirror finished Stainless Steel [Grade 304] Letter of height not less than 400 mm, made with 1.2 mm thick Hollow Tube of suitable size / pattern, fixed on Plastered Surfaces / Granite Dado etc. complete all as specified and as directed.

S&F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc as directed.

S&F in repairs for 600 mm dia concertina coil stretches along with three lines for RBT supporting wire to same material as concertina coil having standard specifications (i.e 51 spiral per coil average weight not less than 1.3 Kg/RM), including coating of Px2 compound (Anti Rust) & fixed in angle iron brackets with clips, pins on compound wall with and including using necessary scaffolding along the length of wall, complete all as specified.

Dismantling chain link fencing wire mesh any type

Dismantling post struts (RCC) any section embadded in natural ground including taking out embeded portion.

Excavating in post holes (or similar holes) each n.exc 0.5 cu.m, getting out in hard /dene soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface.

S&F PVC coated Chain link MS Galvanised Fencing Mesh of size 50mm x 50mm, 4mm dia wire with minimum 1mm thick PVC coating and of weight not less than 4.5 Kgs/Sqm, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded granite stone aggregate) as in flooring /hard standing etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 30 cm x 30 cm x 22 mm to 25mm thick coloured Chequered cement concrete tiles in flooring, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade including 15mm thick Cement mortar (1:6) screed bed or bedding layer of mortar for laying floor tiles. complete all as specified and as directed.

M&L sand filling under floors or in foundation including watering and consolidation.

Dismantling of machine pressed precast concrete inter locking blocks in floor etc

M&L machine pressed precast concrete inter locking blocks with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mmm thickness M-40 grade.

M & L for precast cement concrete solid building blocks or slabs10 cm thick (with plain or interlocking joints as directed) setting in mortar 1: 4 complete all as specified and directed.

M&L for clearing the drain lines by remqve silt/soil/debris completaly preferably by remove cover slabs to enable the water to flow freely remove of sludge and other materials obtained from the drain line removing to out side MD land and making good complete all as required and as directed Engineer in charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil and getting out complete all specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil and getting out complete all specified and directed.

Removing excavated surplus soil to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided

M&L extra over stone walling for hammer dressing to face stones & dressing face beds and joints as specified of random rubble walling, un coursed or brought up to course with maximum depression on face from a straight edge not exc 40mm complete all as specified & directed.

M&L for Mild steel Round bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping/bed blocks including weathering slightly rounded or chamfered angles and throating including use & waste of form work complete all as specified and directed.

M&L keyed pointing in CM (1:3) to random or polygonal rubble, uncoursed or brought up to courses.

S&F for anodised aluminium frame work of any size for aluminum composite panel complete all as specified.

INDRA CONSTRUCTIONS (BID ID -3064794)

K.ADITYA ENGINEERING CONTRACTORS (BID ID -3064242)

sai ganesh enterprises (BID ID -3064228)

K NAGARAJU (BID ID -3064983)

SAI SAMPATH ELECTRICAL AND ENGINEERING (BID ID -3065177)

TECHNO SOFT SOLUTIONS (BID ID -3060150)

RAGHU RAMA PANDA (BID ID -3065379)