Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC 270 ADARSH NAGAR ROORKEE HARIDWAR 247667 | HARIDWAR | UTTARAKHAND | 247667 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹8.9 L+₹14,635 (1.68%)Rejected-Finance A 29 SAMRAT PALACE GARH ROAD MEERUT UP 250001 | MEERUT | UTTAR PRADESH | 250001 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹9.1 L+₹37,635 (4.32%)Rejected-Finance 308 RAMNAGAR ROORKEE HARIDWAR UTTARAKHAND 247667 | HARIDWAR | UTTARAKHAND | 247667 | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹9.9 L+₹1.2 L (13.9%)Rejected-Finance 133 SADAK DUDHLI SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹11.0 L+₹2.2 L (25.7%)Rejected-Finance PLOT NO 4 NAYA GAON HARIPUR KANWALI P O SEEMADWAR DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
4 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
PERIODICAL SERVICES TO MD ACCN AND OFFICE COMPLEX AT PCDA (AF) UNDER AGE B/R-III OF GE CLEMENT TOWN
2024_MES_672608_1
GE /CLT / of 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Class E Cat a(i)
6 documents required · 6 mandatory
₹500
Yes
GE Clement Town
₹30,000
Yes
16 Jan 2025
6 Sept 2024
11 Oct 2024
6 Sept 2024
4 Oct 2024
20 Sept 2024
Amount
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick rendering cement mortar (1:4) mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. (WPC shall be paid seperately)
M&L for 10mm thick plaster on roof, chajja and roof parapet of CM (1:3) on RCC finished even and smooth without using extra cement etc ncl taking down cement plaster complete all as specified and directed by Engr-in-Charge.
Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls surface including salt, glue and blue etc. as required incl cleaning of glass panes, floor and plinth protection complete all as specified and directed by Engr-in-Charge.
All as per item No.6 above but two coats of white wash on wall surfaces complete all as specified and directed by Engr-in-Charge.
All as per item No 6 above but one coat of white wash on ceiling surface complete all as specified and direced by Engr-in-Charge.
M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on walls including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge.
All as per item No.09 above but on ceiling surfaces complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over a layer of wall care putty to make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE.
M&L preperation of old painted plastered or stone surfaces of any description and applying one coat of exterior emulsion paint (Apex) of asian paint or other equivelent as approved complete upto six storey height all as specified and directed b Engr-in-charge. Note : The work is required to be carried out upto Double storey building. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour
M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE. (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for preparation surface of old wall by washing,rubbing down and stopping of surfacest and applying one coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge.
M&L for preparation surface of old wall by washing,rubbing down and stopping of surfaces incl complete removal of existing treatment and applying two coat of cement base paint on walls complete all as specified and directed by Engr-in-Charge.
M&L for preparation surface of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
All as per item No.16 above but applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-Charge.
M&L preperation of old painted steel and iron surfaces of any description not otherwise described over 10cm width of girth and applying one coat of synthetic enamel paint/Aluminium paint/Golden paint (any tint/shade) complete all as specified and directed by Engr-in-Charge..
All as per item No.18 above but applying two coat of synthetic enamel paint/Aluminium paint/Golden paint on steel surfaces complete all as specified and directed by Engr-in-Charge.
M&L for preparing old polished wooden surface over 10cm width or girth including filling the cracks with wooden filler, rubbing the surfaces to give smooth finish and applying one or more coat of french polish for high gloss finish complete all as specified and directed by Engr-in-Charge.
M&L for preperation of old painted plastered or concrete surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L preparation of new surfaces with 2mm thick wall putty and applying two coat of acrylic distemper over a coat of primer on walls complete all as specified and directed by Engr-in-Charge.
M&L two coats of cement based paint over a coat of primer to newly plastered surfaces of wall including preparation surfaces complete all as specified and directed.
M&L two coats of weather proof emulsion paint Apex in newly plastered surface over a coat of primer incl preparing the surface with 2mm thick wall putty complete all as specified and directed by Engr-in-Charge.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
Jain Engineering Works (BID ID -3116533)
ANEJA AND COMPANY (BID ID -3117651)
ANKIT KUMAR (BID ID -3108240)
sweety pest control (BID ID -3128318)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .