Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹16.3 L+₹1.4 L (9.13%)Rejected-Finance 1ST COMPLEX RADHANPUR ROAD NEAR BYPASS CIRCLE OPP 1SQUARE MARKET MAHESANA GUJARAT 384002 | MAHESANA | GUJARAT | 384002 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹17.8 L+₹2.9 L (19.3%)Rejected-Finance | L3 | Rejected-Finance BEING L3 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BARODA
GE AF BARODA PO DARJIPURA BARODA 390022
REPAIR / MAINT OF LT DISTRIBUTION SYSTEM PANELS LT UG CABLES AND CONNECTED WORKS AT HARNI CAMP AND AIRFIELD AREA AT AF STN BARODA
2022_MES_543184_1
8721/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE AF BARODA
AS PER TENDER DOCUMENTS
3 documents required · 3 mandatory
₹500
GE AF BARODA
₹40,000
Yes
27 Sept 2022
4 Aug 2022
3 Sept 2022
4 Aug 2022
1 Sept 2022
18 Aug 2022
5 Aug 2022 - 12 Aug 2022
Amount
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, welles cesspitsm, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depthe in hard/dense soil and getting out , complete all as specified and directed.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified and directed.
Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified and as directed.
M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and as directed.
Supply and laying factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed
Supply and fix in replacement of 1100 V grade heavy duty service cable PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed flat of stranded multistranded conductor size 6 sq mm 02 core .Including taking down of old cables.complete all as specified and directed
All as per item no.6.00 Here in above but 10 sqmm 2 core size cable complete all as specified and directed
All as per item no.6.00 Here in above but 16 sqmm 2 core size cable complete all as specified and directed
All as per item no.6.00 Here in above but 16 sqmm 4 core size cable complete all as specified and directed
Supply & Replacment of XLPE insulated heavy duty electric cables with alluminium conductor,1100 volts grade, cross-sectional area 25 sq mm 2 core Including taking down of old cables.complete all as specified and directed (Earth work, cable protection and sand cushioning shall be measured and paid for separately)
All as per item no.10.00 Here in above but 35 sqmm 3.5 core size cable complete all as specified and directed
All as per item no.10.00 Here in above but 50 sqmm 3.5 core size cable complete all as specified and directed
All as per item no.10.00 Here in above but 70 sqmm 3.5 core size cable complete all as specified and directed
All as per item no.10.00 Here in above but 95 sqmm 3.5 core size cable complete all as specified and directed
Supply, fixing, connecting and testing street light LED INVERTOR type suitable for working on 230 volts, 50 Hz, AC of 45 Watts Including taking down complete all as specified and directed. Halonix Cat Part No. LED SL HLSLD-MLO4-45-CWL-INV-DIMM-RTCR or equivelant in Orient/ Havells/ Crompton / Bajaj.
Supply, fixing, connecting and testing street light LED invertor type suitable for working on 230 volts, 50 Hz, AC of 60 Watts Including taking down complete all as specified and directed. Halonix Cat Part No. LED SL INVER HLSLD-ML04-60-CWL-INV-RTC-R or equivelant in Orient / Havells /Crompton /Bajaj.
Supply and fixing LED Solar street light fitting 20 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified and directed. (Excavation , PCC & earth work shall be measured and paid separately)
S & F of MCCB 200 Amps current carrying capacity 36 KA AC, 415 Volts three pole with thermal & adjustable magnetic setting complete Including taking down complete all as specified and directed
S & F of MCCB 250 Amps current carrying capacity 36 KA AC, 415 Volts three pole with thermal & adjustable magnetic setting complete Including taking down complete all as specified and directed
S & F of MCCB 125 Amps current carrying capacity 35 KA AC, 415 Volts three pole with thermal & adjustable magnetic setting complete Including taking down complete all as specified and directed
S & F of MCCB 63 Amps current carrying capacity 25 KA AC, 415 Volts three pole with thermal & adjustable magnetic setting complete Including taking down complete all as specified and directed
S & F of OFF Load Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete Including taking down complete all as specified and directed.
S & F of Off Load Change over(Front Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete Including taking complete all as specified and directed.
S & F of sheet metal enclouser with 4 Nos insulated Bus bars of capacity 250 Amps 6 way capacity with epoxy insulators and at bottom opening for cable connection with 50X6mm thick angle iron Base frame including PCC foundation and connectioning of incoming and out going cables complete Including taking down of old bus bar complete all as specified and directed.
GI bracket made out of 50mm dia medium grade pipe 1.2 m length to shap for fixing on pole and suitable for 48 to 70 Watt street light fitting with 02 Nos. clamps of flat iron (40 x 4mm), nuts, bolts and washers including painting with two coats of aluminium paint over a coat of primer complete all as specified and directed
Material and labour for GI tubing light grade 50mm dia bore with all fittings laid in trenches complete all as specified and directed
Material and labour for GI tubing light grade 80mm dia bore with all fittings laid in trenches complete all as specified and directed
M &L in repair of PVC insulated and PVC sheathed cable aluminium conductor 4 Sqmm 3 core superior quality complete all as specified and directed.
S&F in repair of aluminium conductor, steel reinforced (ACSR) of any size, any type, as per existing one and stringing properly on the insulators and binding with aluminium wire, connectors, jumpers etc including dismantling of old deteriorated ACSR conductor of any size, any type complete all as specified and directed. Note :- Measurement and payment shall be made by measuring horizontal distance between centres of two adjacent poles and adding 3 % sag, jointing, jumpers etc.
M&L in repair of pin type porcelain, vitreous, brown insulator including one galvanised mild steel spindle two galvanised iron washers and one galvanised iron nut 100 mm height 65mm dia for 1100 Volts grade including dismantling of unserviceable LT insulators from existing OH lines complete all as specified and directed.
M&L in repair of shackle type porcelain, vitreous brown insulator including one galvanised MS strap of size 31x3 mm, 12mm dia insulator bolts washers and nut for 1100 Volts grade 75mm in height and 90mm dia including dismantling of unserviceable LT insulators from existing OH lines complete all as specified and directed.
S&F the following component incl.Scrubing and repainting of LT panels with following process.in existing LT Panel Boards including disconnecting and taking down at different location complete all as specified and directed.
One coat of redoxide after srubing and cleaning of panel suface and Two coat of synthatic enamuled paint with spray machine complete all as specified and directed
Sticking of danger notice board on front of panel complete all as specified and directed
Voltmeter Digital type 0- 500 Volts complete all as specified and directed
Ammeter Digital type of 400 Amps capacity complete all as specified and directed
Phase indicator lamp neon type complete with holder assy RYB complete all as specified and directed
CT coils any capacity. complete all as specified and directed
Trimming of branches of tree upto 3 m long and n.exc 50 mm dia coming in contact with conductor complete all as specified and directed. Note : length between two poles shall be considered as one span complete all as specified and directed
M&L for painting of MS cross arms channels bracing support clamps and back plate of existing LT/HT pole by two coats of superior quality aluminium paint including preparation of surfaces complete all as specified and directed.
Restringing of ACSR conductor including jumpering, binding on insulator properly complete on LT line complete all as specified and directed. Note : Four lines of conductors shall be measured as one length.
M&L in repair of copper bus bar of any size of exisiting LT Panel incl cutting/welding/drilling making connection and testing complete all as specified and directed.
S&F in repair of PVC line separator suitable for conductor LT OH line complete all as specified and directed.
Supply and fixing of Alluminium Thimbale of size 10/16/35/50/70/95 Sq mm incl dismentling of U/S cable from panel and refixing after replacement of burnt thimble/ lugs by new one complete all as spd and directed.
Supply and fixing of Alluminium Thimbale of size 120/150/185/240 Sq mm incl.dismentling of U/S cable from panel and refixing after replacement of burnt thimble/ lugs by new one complete all as spd and directed.
M & L for disconecting of burnt/defective LT cable of any size from LT pole for rectification of fault and refrashing joints of all four terminals of cable and refixing/binding of cable terminations with ACSR O/H conductors after removing of loop and relaying of remaining cable loop at base of the pole at various locations complete all as specified and directed. Note-i) Excavation,returning and removal of soil and cable protections deemed included in quoted rates. ii) Material for binding of terminals such as aluminium wire,clamps for cable, jumpering material etc. also included in quoted rates.
M & L for disconecting of burnt/defective LT cable of any size from LT panel for rectification of fault and refrashing joints of all four terminals of cable and refixing of cable terminations with aluminium/copper lugs after removing of loop and relaying of remaining cable loop at base of the panel at various locations complete all as specified and directed. Note-i) Excavation,returning and removal of soil and cable protections deemed included in quoted rates. ii) Material for fixing of terminals such as aluminium lugs,nut & bolt for cable fixing etc. also included in quoted rates.
M & L for Re routing of HT / LT cables of any size from any place after removing safely from existing place/direction and relaying on new diverted location/ direction complete all as specified and directed. Note-i) Manually Excavation,returning and removal of soil, 70%cable protection and 100% sand for new diverted rout shall be measured and paid seperately. ii) Only 30% of old bricks shall be reused for new diverted rout of cable. iii)Rate of excavation for removing of old cable will be deem included in above quoted rate.
Boring of holes under road, pavement, hard standing by trenchless technology using manual technique and necessary machine including HDPE pipe of 100 mm dia suitable for passing electric cables complete all as specified and directed.
Supply, installation, testing and commissioning of Cubical type wall mounted ‘G’ Frame Panel Boards, O/G TP MCCBs G-Frame with 250 Amp “AA” Frame MCCB,16 Nos of out going ways LT panel board, indoor type factory fabricated made out of CRCA sheet fully enclosed with front openable Double Door shutter, dust and vermin proof complete with locking arrangement, having a system including following items and panel shall be mounted on wall with epoxy/ Porclain insulators , 3 phase, 4 wire , 50 cycle, 415V, AC system pre-wired with suitable coper wire PVC insulated with all control accessories including connecting the existing cables/earthings with the proposed LT panel with suitalbe size of thimbles nuts, bolts and washer etc suitable for enclossing the following items including taking down old panel from site complete all as specified and directed.
Supply, installation, testing and commissioning of Cubical type wall mounted LT panel board, outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick, fully enclosed and angle iron frame of size 40 x 40 x 6 mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of bus bars of Alluminium TPN 1000 Amps conforming to IS :5082 duly insulated and mounted on epoxy/ Porclain insulators in totally enclosed chamber with 3 phase, 4 wire , 50 cycle, 415V, AC system pre-wired with suitable coper wire PVC insulated with all control accessories, duly painted internal externally with two coats of synthetic enamel paint of approved quality over a coat of red oxide primer on PCC 1:2:4 type B-1 platform 60 cm above the ground level including connecting the existing cables/earthings with the proposed LT panel with suitalbe size of thimbles nuts, bolts and washer etc suitable for enclossing the following items complete all as specified and directed
(a) Incoming (i) MCCB 4 Pole , 35KA, 400 Amp-01No (b) Outgoing (i) MCCB TP 200 Amp -02 No (ii) MCCB TP 100 Amp -04 No (iii) MCCB TP 63 Amp -01 No (iv) Aluminium bus bar 3 phase, 4 wire 600 Amp rating (v) hylem sheet, bridge insulator cable gland (vi) Indicating lamp R,Y,B (vii) Digital type Volt meter /Amp. Meter (viii) Digital frequency meter having range 0-50Hz-01 No (ix) Digital PF meter-01 No
Plain cement concrete 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete for stay complete all as specified and directed.
Plain cement concrete 1:2:4 ( nominal mix ) type B-1 (using 20 mm graded crushed stone aggregates) as in copings and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork where required complete all as specified and directed.
M&L for heat srinkable type straight through joint outdoor type for LT UG cable including excavation and earth work in any type of soil/ hard standing floor complete all as specified and directed.
25 to 50 sqmm 3.5 core complete all as specified and directed
70 to 150 sqmm 3.5 core complete all as specified and directed
M&L for heat srinkable type joints of following type for HT UG cable 95 Sqmm 3 core including excavation and earth work in any type of soil/ hard standing floor complete all as specified and directed.
Straight through joint complete all as specified and directed
Indoor type joint complete all as specified and directed
Outdoor type joint complete all as specified and directed
MADHAV ENTERPRISE
Dighard Electricals
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .