Annual Plan- 844/24- Kandamkulam Jubilee Hall 2 Phase (Interior works Electrification)Air Conditioning completion-Electrical AC Work

Amount

Balance AC Works for completion

OD221330/2023-2024:Supply ,installation , balancing and commissioning of fabricated at site aluminum rectangular/round ducting complete with all fittings such as tees, bends, special shoots, inspection door, transformation pieces etc as per approved drawing and specification of 0.80mm sheet thickness complete as required

OD221334/2023-2024:Supplying and fixing powder coated extruded aluminum defuser grills without volume control dampers as per specification

OD241872/2023-2024:SITC of air supply diffusers of powder coated aluminum with alu. volume control dampers as per specification

OD221344/2023-2024:Supply an installation of Five micron filters for pre-filtration of air down to 5 micron at an efficiency of 98.5% suitable for AHU

OD221346/2023-2024:Supply and installation of 0.3 micron filters for pre filtration of air down to 0.5 micron at an efficiency of 99.7% suitable for AHU

OD221376/2023-2024:Supply ,installation ,testing and commissioning of micro processor control panel for 8.5 / 11 / 17 TR AHU

OD221378/2023-2024:Supply and installation of class 'O' type nitrile rubber 10mm thick open cell elastomeric insulation for thermal insulation of duct make A flex/ K flex/ equivalent

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD221380/2023-2024:Supply and providing following size hard/ soft drawn copper pipe for the extending the pipe between outdoor and indoor unit including providing rubberized form sleeve 10mm thick, brazing, leak testing etc. size 11/8 inch 22 gauge soft drawn copper pipe insulated using 10 mm thick rubber nitrite insulation

OD221461/2023-2024:Supply and providing following size hard/soft drawn copper pipe for the extending the pipe between outdoor and indoor unit including providing rubberized form sleeve 10mm thick, brazing, leak testing etc. size 5/8 inch 22 gauge soft drawn copper pipe insulated using 10 mm thick rubber nitrite insulation

OD221462/2023-2024:Supply and filling of R-410 gas

OD221471/2023-2024:Supply fabrication and installation of 50 mm thick AHU out door cabinet for maintaining required temperature made with preprinted galvanized GI sheets of required thickness and density locking type construction film coated surface PUF insulated , supporting with powder coated GI angle and channels, off white color and suitable door opening for inspection and service etc as required at site

OD241895/2023-2024:"Supply, installation, testing and commissioning of Inverter Wall mounted/Hi-wall type Split AC unit complete with indoor unit and outdoor unit. Indoor unit with DX cooling coil,filter,fan-motor assembly and air outlet with horzontal/vertical automatic rotating deflecters. Air cooled condensing unit complete with Scroll/Rotary compressor, condenser fans,condenser coil.The unit should operate on R410A/ R32/R407C refrigerant.Rates shall include cordless remote controller. Make:Daikin/Carrier/Equivalent" 2.0 TR Hi-wall unit (5 Star Inverter unit )

OD241899/2023-2024:"Supply and installation of voltage stabilizer to maintain a constant voltage level for air conditioning units to prevent undue power failures. Make:V-Guard/Equivalent" 5 KVA

SHAJI P

Bidder Name

Bharath Aircon

SHAJI P