GE/KHU-18/2019-20 SPECIAL REPAIR OF TOILET AND BATHROOM AT HQ 8 MTN DIV KHUMBATHANG UNDER GE KHUMBATHANG

Amount

Dismantling of plain or corrugated steel sheeting, any guage, thickness, including Nainital patterns roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down plastering on brick or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water, etc built in cement mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) n exc 1.50 Sqm each and removed to store complete all as specified and directed.

Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in floors and finishing the surfaces even and smooth using extra cement complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in floors and finishing the surfaces even and smooth using extra cement complete all as specified and directed.

M&L plastic diving 3mm thick 38mm wide glass dividing stripscomplete all as specified and directed.

S&F 2nd class soft wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

M&L for rendering CM (1:6) 15 mm thick on fair faces of brick work or concrete surfaces surface even and smooth without using extra cement complete all as specified and directed.

M&L for 12 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building complete all as directed and specified.

Preparation of newly plastered or unplastered surface and applying one coat of white wash on walls complete all as specified and directed.

Preparation of newly plastered or unplastered surface and applying two coats cement base paint complete all as specified and directed.

M/L for preparation of old plastered surface of walls and applying one coats of cement base paint over a coat of primer complete all as directed and specified.

S & F glazed ceramic tiles coloured tiles 300 x 200 mm x 7mm thk on vertical surfaces such as skirting, dado etc complete all as specified and directed.

S & F MS pipes ,reactangular tubes,as in framed work,purlins rafters struts, vertical members trusses and similar works incl special shape washers etc complete using ERW or induction butt welded tubes all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/chajja/cladding fixed with self tapping screw as specified and directed by engr-in-charge.

S&F CGI aluminum zinc coating GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as directed and specified.

S & F fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu screw in roof complete all as directed and specified.

S&F bib taps cast copper alloy fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrul and fixed in repair.

S&F 15mm Pillar taps, fany typecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm Stop valves,fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs waste coupling of PTMT (half or full treated) 32mm dia complete all as specified.

S & F PVC connection 15mm dia with PTMT nuts of length 600mm complete all as specified.

S & F in repair vitreous china wash hand basin, white flat back size 580 x 450mm excl taps, waste but incl brackets complete all as specified and directed.

S & F 15 mm bore tubing galvanised iron medium grade with all fittings and fixed complete all as specified and directed.

S & F 20 mm bore tubing galvanised iron medium grade with all fittings and fixed complete all as specified and directed.

Dismantling existing water tanks 1000 ltrs capacity and removing to store complete all as directed..

S&F rotational moulded polyethylene water tank 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in repair in position all as specified in SSR complete all as directed at site.

S&F 20mm dia of bore Gun-metal, globe or gate valves, with iron handle,half turn screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs10 ltr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete and specified and directed by engr-in -charge.

Preparation of newly plastered or unplastered surface and applying three coats of white wash on surface of ceiling complete all as specified.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F fixing in repairs stainles steel (Orissa pattern) water closet size 580X440 with integral foot rests ( excluding flushing cistern and flush pipe) complete incl. connection to trap and flush pipe anti syphonage pipe etc complete all as specified.

S&F in repairs CP Towel rail 450mm long fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified

S&F in repairs soap dish, vitreous china white approximate size 160x160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified

S&F 100 mm dia PTMT Grating complete all as specified.

S&F of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

S&F in repairs 100 mm dia cast iron soil waste pipe sand cast pipes and vent pipe in any length with or without ears with cement joints fixed to wallS&Floors etc complete all as specified.

M&L, two coats of synthetic enamel paint over a coat of red oxide primer on wooden surfaces of any description, over 10 cm width or girth complete all as specified and directed.

Excavation in trenches n exc 1.50 m wide, n exc 1.5 m in depth for foundation and getting out in hard /dense soil complete all as specified and directed..

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC Nominal mix 1:2;4 ( 20 mm graded stone aggregates) as in beams cantilever bressumer lintles over 1.5 m span complete all as specified and directed. .

Formwork (rough finished ) to sides of beam, lintels complete as per specified

M &L precast cement concrete type C-1, 1:3:6 using 20mm graded stone aggregates, block masonry with solid blocks, exc 10 cm width and setting in cement mortar 1:4 complete all as specified.

M & L for 10 mm thick rendering in CM (1:6) on fair surfaces of brick or concrete work and finished even & smooth without using extra cement on walls complete all as specified.

M & L for 15 mm thick rendering in two layer (10+5mm) in CM (1:4) on fair surfaces of brick or concrete work and finished even & fair with using WPC on walls complete all as specified.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and directed..

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L Hard core of broken stones or boulders of gauge exc 63mm & n'exc 100mm, deposited, spread and levelled in layers n.exc 15cm thick incl watering and rolled to true surface complete all as specified and directed..

M&L 100mm thick cement concrete (1:4:8), type D2 using 40mm graded stone aggregate as sub base in floor complete all as specified.

M&L 10mm thick, rendering in cement mortar (1:4) onas in backing coat plaster for skirting/dado complete all as specified and directed..

Glazed ceramic coloured tiles printed or designer with highlighter and border concept joint free of size 250x350x7mm thick as in vertical surfaces such as dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile complete all as specified and directed.

M&L second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints, etc. complete all as specified

S & F 2nd class Hard wood plain framed panelled shutters (any No of pannels ) 40 mm thick with panel of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers as in doors all as specified.

M&L for preparing previously untreated wood and wood based materials of any description over 10cm width/ grith and applying two coats of Synthetic Enamel paint over one coat of pink primer including preparation of surface complete all as specified and directed.

M&L for preparing previously untreated steel surfaces based materials of any description over 10cm width/ grith and applying two coats of Synthetic Enamel paint over one coat of red oxide primer including preparation of surface complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.

S & F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.

S&F 125 mm, long, Aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 125mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified.

S & F Aluminium anodised sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F hold fasts flats iron Fe-290 Gde-E-165 complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 , 50 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Ditto but 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and directed. .

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

S&F WHB Viterous China white/colour flat back of size 550x400mm on existing brackets complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap ,plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. .

S & F in repair stop valve cost copper alloy screwed down high pressure with round handle complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m & n exc. 3.0 M in depth for foundation n exc 10 sq m on plan and getting out in hard / dense soil complete all as specified and directed. .

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m & n exc. 3.0 M & n exc 4.5 m in depth for foundation n exc 10 sq m on plan and getting out in hard / dense soil complete all as specified and directed.

M&L walling of random rubble masonry uncoursed well bonded bedded and solidly hearted built in CM 1:4 ,complete all as specified.

M&L walling of random rubble masonry uncoursed well bonded bedded , laid dry in retaining walls, abutments and soakage well and similar works ,complete all as specified.

Formwork, rough finished conc surfaces tosoffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exec. 200 mm thick (Horizontal or sloping), complete all as specified.

M&L for RCC 1:2:4 type B1 using 20mm graded aggregate as in slabs supported on walls, tank slabs and the like complete all as specified.

M&L for providing precast RCC as in landing, cover slabs (for manhoes etc) chullah hoods chajjas, water truoghs mangers sheves in 1:2:4 type B1 ( 20 mm graded aggregate) and set in CM 1:6 complete as as specified.

M&L for 150 mm bore, reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and directe by Engr-in-Charge.

M&L cement concrete 1:48 type D2 (40mm graded aggregate) as in concrete bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : - Note : Colour coding for point and sub main wiring should be maintained at site. Incase of any deviation necessary recovery will be made as applicable. If any fitting is found serviceable and point wiring is unserviceable only point wiring will be replaced.

S&F Ceiling rose 3 terminals of PVC Polycarbonate complete all as specified & directed

S&F switch piano flush type single pole one way 5 amp complete all as specified and directed. Make : SSK/ Fine/ Anchor

S&F holder any type for batten fittings complete all as specified.

Supply & fix in repair 7W LED lamp complete all as specified and directed. Make : Havells/Philips/ Syska/ CG

S&F in repair Exhaust fan, ventilator DX-WE with louvers plastic body suitable for 250mm dia sweep complete with all fixing accessories incl making opening for fixing in any type of partition wall complete all as specified and directed. Make : Havells/ Bajaj / CG

Dedcuct Credit for Demolished/Dismantled material Rs (-) 27924.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S ALI MOHD AND SONS

M/S kashmir fair deal services