Alasahi to Nagar_Road_CC and Retaining Wall -40 mtr-_1.800 to 1.880

Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth including cost of labour T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge.

Supplying and filling in foundation trenches and plinth with sand, well watered and rammed in layers not exceeding 15cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.

Plain Cement Concrete in open foundation with clean black hard granite stone aggregates of 40mm & down graded size of approved quality from approved quarry as per drawings & Technical Specification Clause 1109, 1302.5, 802, 804, 805, 806, 807, 1202 and 1204 of MORD specification for Rural roads and as per direction of Engineer-in-Charge. i) P.C.C M-15 Foundation

Plain Cement Concrete in open foundation with clean black hard granite stone aggregates of 40mm & down graded size of approved quality from approved quarry as per drawings & Technical Specification Clause 1109, 1302.5, 802, 804, 805, 806, 807, 1202 and 1204 of MORD specification for Rural roads and as per direction of Engineer-in-Charge. i) P.C.C M-15 Sub structure

Providing laying R.C.C. Hume pipe NP3 class for culverts including fixing collar with cement mortar 1:2 but excluding excavation, protection work, backfilling, concrete and masonry work in head walls and parapets clause 1106 of MORD specification for Rural roads and as per irection of Engineer-in charge.

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.