MMGSY 2026-27 (Strengthening and Resurfacing) Resurfacing of Various Roads in Uchchhal Taluka Package No.29 Total 2 road 2.800 km. Dist.Tapi. (1) Katswan Village Parsali faliya to Parsali Varg Shala toward road Km 0/0 to 1/500 Ta.Uchchhaal (2) Katswan Patel faliya to Maharatra Limit road Km 0/0 to 1/300 Ta.Uchchhaal.

Name of Work:- MMGSY 2026-27 (Strenghening and Resurfacing) Resurfacing of Various Roads in

Uchchhal Taluka Package No. 29 Total 2 road 2.800 km.[1]Resurfacing of Katswan Village Parsali faliya to

Parsali Varg Shala toward road Km 0/0 to 1/500 Ta. Uchchhaal Dist.Tapi.[2]Resurfacing of Katswan Patel

faliya to Maharatra Limit road Km 0/0 to 1/300 Ta. Uchchhaal Dist.Tapi.

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

1 Clearing and grubbing road land including uprooting 0.99 Hect 28455.09

rank vegetation grass bushes,shrubs,sapling and

trees girth up to 300 mm removal of stumps of trees

cut earlier and disposal of unserviceable materials (C)

By mechanical means in area of light jungle.

2 Earthwork in cuting in all sorts of soil and soft murrum 2268.00 Cum. 130.94

including conveying and spreading the stuff,

embankment as and where directed within 200meters

from the end of the cutting with all required lead and

3 Earth work for embankment including breaking clods 737.70 Cum. 173.67

dressing with all lead & lifts and including watering

rolling and consolidation of sub grade in layers of

O.M.C. to required dry density including filling in

depressions which occure during the process using

vibratory roller 80 to 100 KN (E) From borrow area

within 3.00 Km Lead Having C.B.R. More than 5.00%

4 Scarifying gravelled macadam or bitumen macadam 8400.00 Sqmt 41.74

surface 6 cm to 10 cm.depth including stacking useful

materials on road side and disposing off remaining

5 Supplying, Stacking, Spreading & rolling of Hard 336.00 Cum. 444.40

Murrum on road side for hard side shoulder of work

as per specification including filling the mesure boxes

of standard size etc. complete.

6 Consructing of granular sub-base Gr-II by providing 879.30 Cum. 780.73

course graded B.T. machine crushed material

satisfying MOST specification of grading II including

spreading in uniform layer with motor grader on

prepared surface, mixing by mix in place method with

rotavator at OMC and compacting with vibratory roller

to achieve the desired density etc. complete.

7 Providing and laying of Wet Mix Macadam base 1221.00 Cum. 876.99

course as per MORTH specification using machine

crushed B.T. chips as per required gradation, mixing

with required optimum quantity of water, conveying

the mix to site of work, spreading in to grade and

camber with paver/mechanical means and

consolidation each layer with vibratory roller to

aschieve the desired density including cost of material

labour plant and equipment etc. complete.

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

8 Providing and applying primer coat with Bitumen 8757.00 Sqmt 60.50

emulsion (SS-I) on prepared surface of granular base

including cleaning of road surface and spraying

primer at the rate of 7.50 kg/ 10sqmt using

mechanical means as per Technical Specification

Clause 502. (Hincol made only ) (ii) Medium porosity

9 Providing & laying bituminious base course 37.50 mm 357.00 MT 2715.89

thick compacted in Single layer asphalt VG-30 grade

at 1.99 % by weight of mix for mixing and 2.50 kg/10

smt VG-30 grade Asphalt for tack coat & using B.T.

chips of required gradation including cleaning and

heating asphalt, premix material by drum mix process

in proper gradation and laying with paver finisher

including rolling and consolidation with 8-10 tonne

vibratory roller and providing all material equipment,

tools, and plants, fire wood, oil, kerosene labour

charges etc. complete using contractor's own

machinaries, drum mix plant and paver finisher etc.

10 Providing, laying 50 mm thick compacted Bituminous 965.00 MT 3569.61

Macadam considering 0.66 cmt./10Smt. Stone chips

for one M.ton as per specification,VG-30 using the

asphalt at rate 34.00 Kg/M.ton (i.e. 3.40% by weight of

total mix) for mixing and VG-30 for tack coat at rate

2.5 Kg/ 10sq.mt. including heating and mixing the

asphalt and stone aggregates by continuous batching

of drum mix plant and transporting and spreading the

same by paver finisher and consoli-dation with

vibratory roller with necessary equipments oil,

kerosene,fire wood labour charges etc comp.with

contractor's own machineries and equipment tools

etc. complete in accordance with the requirement.

11 Providing & laying 25mm thick compacted Semi 505.00 MT 4460.13

Dense Bituminous concrete (SDBC) using crushed

stone aggregate as per MORT & H gradation and

bitumen VG-30 at the rate of 5.00% ( i.e. 50 Kg/MT)

by weight of total mix using hot mix hot laid process

including heating the asphalt and aggregate by

continuous batching mixing by drum mix plant and

transporting the mix and spreading the same by paver

finisher & consolidation with power road roller

including providing & laying uniform tack coat

including the cost and using all necessary equipments

tools, plants, including cost of all materials firewood,

oil, lubricants, labour charges etc. complete.

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

12 Providing and laying asphalt painting on B.T. surface 8757.00 Sqmt 43.39

with bitumen VG-30 at rate 5.00 Kg / 10.00 Sq.mt. of

bitumen including spreading stone dust for painting

surface at rate of 0.03 cu.mt. / 10 sq.mt.

13 Providing and fixing ordinary Kilometer stone of 6.00 Nos. 1293.39

precast C.C. 1:2:4 including necessary reinforcement

as per I.R.C. type design in C.C. 1:4:8 including letter

and paints etc. complete (For N.H., S.H. and M.D.R.)

14 Providing and fixing Hectometer stone as per I.R.C. 12.00 Nos. 356.50

type design including lettering and painting etc.

complete. (ii) Fixing in C.C. 1:5:10

15 MMGSY Logo Board:- Providing and fixing MMGSY 2.00 Nos. 5050.00

Logo Board made out of 2mm aluminium sheet, as

per the drawing & design. Pre treated with

phospheting process and acid etching coated with

one coat of epoxy primer and two coat of best quality

epoxy paint, refloctrorized with retro reflective

sheeting as per the latest M.O.S.T. specification,

Mt. long stand post and frame fabricated from suitable

size iron angle of 35 x 35 x 3 mm, 75 x 75 x 6 mm as

required painted with best quality epoxy coatings in

black and white bends. The details of symbol for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 cms for each leg, including

excavation curing etc. complete under the supervision

of Engineer-In-Charge (A)Engineer grade.

16 Village name/ Bump Ahed sign :-Providing and fixing 10.00 Nos. 5045.36

sing boards made out of 2mm aluminium sheet; size

90 x 60cms. rectangle as as per the design of IRC-67-

1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm painted with best quality epoxy coatings in black

and white bends. the details of symbol or inscription /

numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR)

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

17 Direction sign (Junction board):-Providing and fixing 8.00 Nos. 14831.71

sing boards made out of 2mm aluminium sheet; size

120 x 90 cms. rectangle as as per the design of IRC-

67-1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision

of engineer in charge.(A) Engineer Grade.

18 Informatory Signs :-Providing and fixing sing boards 2.00 Nos. 3856.90

made out of 2mm aluminium sheet; size 80 x 60cms.

rectangle as per the design of IRC-67-1977 pre

treatedwith phospheting process & acid teching;

coated with one coat of epoxyprimer and two coats of

best qualityepoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand postand frame

fabricated from suitable sizeiron angle of 35 x 35 x

3mm75x75x6mm as required; painted with best

qualityepoxy coatings in black and whitebends. the

details of symbol for eachboard shall details of symbol

for eachboard shall be as per the instruction

ofengineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x45 x 60cms. for each

leg.including excavation curing tec. complete under

the supervision of engineer in charge.(A) Engineer

19 Road marking with hot applied thermoplastic paints 608.00 Sqmt 367.72

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm

is excluding of surface applied glass beds as per

IRC:35- 2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta

/bump patta lane/center line/ edge line/cut patta. The

white color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time.

The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015. Warranty for the Retro reflectivity should be two

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

20 Supplying and fixing cat eye (Stimsonite) made out 351.00 Nos. 375.72

from Acrilo beautile sterine injuction high compressed

molding with reflector made of MMC (prismatic type of

size 12cm x 6cm x 2.5cm) provided with

bituminousadhesive 100g. with each unit for fixing.

(High Intensity grade)

21 Cautionary Warning Sign :-Providing and fixing sing 18.00 Nos. 3808.66

boards made out of 2mm aluminium sheet; size 90 x

90 x 90 cms. equilateral triangle as per design of IRC-

67-1977. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with

retro refiectivesheeting as per latest

M.O.S.T.Specifications; 3.1m long stand postand

frame fabricated from suitable sizeiron angle of 35 x

35 x 3mm, 75 x 75 x 6mm as required; painted with

bestquality epoxy coatings in black andwhite bends.

The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge.(B)

Engineering Grade.

22 Regulatory/Mandatory signs :Providing and fixing sing 6.00 Nos. 3439.81

boards made out of 2mm aluminium sheet; size

60cms. diameter circle as per the design of IRC-67-

1977 pre treated with phospheting process & acid

eteching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x

3mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR)....

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

23 STOP SIGN:-Providing and fixing sing boards made 3.00 Nos. 4676.06

out of 2mm aluminium sheet; size 90 x 90cms.

rectangle as per the design of IRC-67-1977 pre

treated with phospheting process & acid teching;

coated with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x

3mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing tec. complete

under the supervision of engineer in charge.(A)

Engineer Grade(VR).

24 Supplying and fixing reinforced concrete heavy duty 60.00 Rmt 1968.38

nonpressure pipes with collars for culverts carrying

heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and

laying (to level or slopes) of class NP3 of following

internal daimeters.(iii) 600mm dia.

25 Supplying and fixing reinforced concrete heavy duty 15.00 Rmt 659.99

nonpressure pipes with collars for culverts carrying

heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and

laying (to level or slopes) of class NP3 of following

internal daimeters.(iii) 300mm dia.

26 Excavation for foundation upto 1.5 m depth including 352.80 Cum. 254.35

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil

27 Providing & filling in foundation with ordinary cement 45.40 Cum. 3326.70

concrete M 100 mix and providing necessary vertical

pin headers including formwork vibrating ramming &

curing complete.

28 Providing & casting in situ ordinary cement concrete 424.80 Cum. 3904.76

M-150 mix and providing necessary pin headers

including shuttering, scaffolding, laying, vibrating,

curing and finishing complete without V-Groves.(A)

Height from 0.0 M. to 5.0 M.

29 Supplying and fixing reinforced concrete heavy duty 22.50 Rmt 3469.26

nonpressure pipes with collars for culverts carrying

heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and

laying (to level or slopes) of class NP3 of following

internal daimeters.(iii) 900mm dia.

30 Providing and fixing Guard stone as per I.R.C. type 42.00 Nos. 350.80

design including white washing etc. complete (II)

Fixing in C.C. 1:5:10

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

31 Providing and fixing 20cm x 15cm x 2.5cm thick year 3.00 Nos. 279.69

plate of marble stone set in C.M. 1:4 including

Finishing and engraving letters, etc. complete

32 Wall painting (two coats) with plastic emulsion paint of 175.00 Sqmt 81.38

approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

33 Providing and laying in position FE 500/500D TMT bar 1.56 MT 73858.69

reinforcement including cutting, bending, hooking and

tying complete as per detailed drawings for the

following.(A) Piers (B) Abutments (C) R.C.C. Returns

34 Providing and Laying weep hole in abutment and 172.00 Nos. 87.07

return by using A.C. pipes of 100 mm diameter with

laying in proper grade and jointing complete etc.as

per detailed specification.

35 Providing and filter media 600mm thick as directed at 172.00 Sqmt 1279.96

the back of abutment returns & wingwall as per

detailed specification.

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in

figures and words) of the estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by

the Engineer – In – Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.:

PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where the reisa change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Executive Engineer

Signature of the contractor Panchayat (R & B) Division