PWD Road to Gambhari_Road_WBM Gr III, BUSG,SDBC2.000 to 3.320

Clearing & grubbing road land including uprooting rank vegetation , grass, bushes,shrubs, saplings & trees girth upto 300 mm, removal of stumps of such trees cut earlier & disposal of unserviceable materials by manual means & stacking of serviciable materials to be used or acutioned, upto a lead of 1000 m including removal & disposal of top organic soils not exceeding 150 mm in thickness as per technical specification clause 210 & as per direction of the Engineer-in-Charge.

Labour for scraping cleaning the road surface applying tack coat using 3.0kg of bitumen for 10 sqm and laying 37.5mm thick built up spray grouting in one layer using 0.45cum of 25mm to 40mm size hard granite metal & 12.00kg penetration grade of bitumen for 10 sqm in each layer with 0.12cum of 12mm size hard granite chips as key stone for 10 sqm spreading over & laying including heating pouring & spreading over & spreading bitumen metal & chips & rolling with PRR including hire & running charges of PRR, tar boiler & all other T&P articles but excluding cost & conveyance of bitumen, metal & chips etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing and applying tack coat using bitumen @0.20 kg per sqm on the prepared granular surface / bitumenous surface cleaning with hydraulic brooms including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing and laying semi dense graded bituminous concrete with batch type hot mix plant using crushed agreegates of specified grading , premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled ,vibratory and tandem rollers to achive the desired compaction as per clause 508 of MoSRT&H specification for the road and bridge works (4th Revision) as per the specification and direction of the Engineer-in-Charge.

Construction of RCC guard posts/ Bound ary stone of 200mm to 250mm dia M15 grade cast-in-situ with 20 mm and down graded size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 of MoRD and as per direction of the Engineer-in-Charge.

Construction of embankment with approved materials obtained from borrow pits with all leads and lifts and transporting to site by mechanical means within a lead of 5 Kms, spreading, grading to required slope & compacting to meet requirement of Tables 300-2 & Clause 305 of MOSRT&H specifications for road & bridge works (4th revision) etc. complete as per direction of the Engineer-in-Charge.

Earth Work in excavation for foundation in hard soil with all leads and lifts including all labour, T&P articles, safety measures, incidentals, dewatering, removal of stumps and other deleterious materials and disposal up to a lead of 50mtr, dressing of side and bottom as necessary for the work etc.complete as per direction of the Engineer-in-charge.

Supplying and filling in foundation & plinth with sand well watered & rammed including all cost, conveyance, royalities of the materials labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Providing cement concrete of M-15 grade with 40mm size qua of approved quality and from approved quarry including hoisting, lowering and laying concrete & ramming in layers not exceeding 0.15m thick watering and curring etc. complete including cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Providing weepholes in brick masonry / stone masonry, plain / reinforced concrete abutment, wing wall, return wall with 100mm dia AC pipe extending through the full width of the structures including cost, conveyance, taxes of materials, labour with T&P articles required for the work as per specification and direction of the Engineer-in-Charge.