Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹29.1 L
EMD Value
₹29,100
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Dy Conservator of Forest, Social Forestry Division,Navsari
NEW CONSTRUCTION OF RANGE FOREST OFFICE, GANDEVI AT AJRAI IN GANDEVI RANGE , SOCIAL FORESTRY DIVISION, NAVSARI
366453
12 of 2026-27
Open
Civil Works
Works
Navsari
10 documents required · 9 mandatory · 1 optional
₹1,500
Deputy Conservator of Forest, Social Forestry Division, Navsari
₹29,100
18 Nov 2026
18 Nov 2026
18 Nov 2026
7 Dec 2026
18 Nov 2026
120 days
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Clearing and grubbing road land including uprooting rank vegetation
grass bushes,shrubs,sapling and trees girth up to 300 mm removal of
1 Hectare 0.01 28,455.09
stumps of trees cut earlier and disposal of unserviceable materials (C) By
mechanical means in area of light jungle
Excavation for foundation for depth from up to 1.5 M. m including
sorting out and stacking of useful materials and disposing off the
2 excavated stuff up to 50 Meter lead.(B) Dense & Hard Soil, etc. Cmt 90.10 153.33
complete as per detailed & directed by EIC.
Excavation for foundation for depth from 1.5 m to 3.0 m including
sorting out and stacking of useful materials and disposing off the
3 excavated stuff up to 50 Meter lead.(C) Hard Murrum, etc. Cmt 36.30 280.38
complete as per detailed & directed by EIC.
4 20cm. thickness including watering, ramming and consolidating etc. Cmt 78.00 296.29
complete. (more than 10 ton)
Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth
5 consolidating each disposited layer by ramming and watering. Cmt 88.50 133.65
Carring out plinth treatment to post construction / existing structure by
spraying chemical solution for termite control treatment including labour
and material consistent with I.S.I specification. Using Chlordane and
Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one
6 percent is recommended i.e one liter 20 EC chemical emulsion with 19 Smt. 110.00 81.20
liter give 1 % concentration inclusive of one liter chemical emulsion
application at the rate of 5 Liter chemical/ Sqm of surface is
recommended as per I.S.
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand
: 6- Graded brick bat aggregate 40mm normal size) and curing complete
excluding cost of formwork in (A) Foundation and Plinth
GRADE SLAB (M200) : Providing and laying controlled cement concrete
M.200 Concrete with all lead, including all transportation, pumping,
pouring, curing of concrete etc complete including the cost of formwork
8 but excluding the cost of reinforcement for reinforced concrete work in Cmt. 11.00 4,793.36
M200 Grade Slab
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
9 excluding the cost of reinforcement for RCC work in Foundations Cmt. 9.70 4,644.03
footings, base of columns and Raft etc., for any type of cross section area
complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
10 excluding the cost of reinforcement for RCC work in column up to plinth Cmt. 3.70 6,359.97
lvl. etc., for any type of cross section area complete as directed by E. I. C.
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
11 excluding the cost of reinforcement for RCC work in TIE, GROUND, & Cmt. 14.70 6,328.76
PLINTH BEAMS for any type of cross sectional area. etc., complete as
directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
12 excluding the cost of reinforcement for RCC work in (D) For Columns for Cmt. 5.90 7,767.81
any type of cross sectional area for G.F. Lvl. etc., for any type of cross
section area complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
13 excluding the cost of reinforcement for RCC work in LINTLE-BEAM, Cmt. 2.30 6,328.76
LINTEL & SILL for all cross sectional area at G.F. Lvl. etc., complete as
directed by E. I. C.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand
: 4- graded stone aggregates 20 mm nominal size) for reinforced
concrete Chhajjas not exceeding 10cm. thickness upto floor two level
14 including finishing the exposed surfaces with cement mortar 1:3 (1- Cmt. 1.30 6,601.67
cement, 3 Fine sand) to give a smooth and even surface centering and
formwork and curing complete excluding cost of reinforcement.
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
15 excluding the cost of reinforcement for RCC work in SLAB BEAMS for Cmt. 6.60 6,663.02
Ground floor & Super structure, & for any type of cross sectional area.
etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing
complete including cost of necessary, form work, compacting with
vibrator curing centering & shuttering in true line and level etc, but
16 excluding the cost of reinforcement for RCC work at Plinth to Ground Cmt 19.80 6,513.74
FLOOR SLAB for all thickness/cross section etc. complete as directed by E.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto ground floor level
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:6. (1- Cement : 6 -fine sand)(B) Conventional
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement
Mortar 1:6 (1-Cement :6-finesand) (B) Conventional For Ground Floor etc.
19 Complete. Cmt 30.00 4,403.40
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar
1:6 (1-Cement :6-finesand) (B) Conventional For First Floor etc.
20 Complete. Cmt 8.50 4,726.75
Half brick masonry in common brunt clay building bricks having
crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-
Cement : 4 -coarse sand ) (B) Conventional half brick masonry at Ground
21 Floor level.(B) Conventional Smt 119.70 669.34
Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any
height with all labour & material, etc. Complete, as per detailed &
directed by EIC.
Providing 15mm thick cement plaster in single coat on Rough
(Similar)side of single or half brick walls for interior plastering for
Ground floor level and finished even and smooth in (ii) Cement mortar
23 1:4 (1-cement :4-sand) Smt 359.60 176.09
Providing 10mm thick cement plaster in single coat on brick/concrete
walls for interior plastering for Ground Floor level and finished even and
smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)
Providing 20 mm thick double coat mala cement plaster on interior brick
/ concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough
25 finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Smt 257.10 279.29
Coarse sand) finished with trovel including scaffolding curing etc.
Add for plaster groove in plastered surface or moulding to R.C.C.
projections.
Providing and laying polished Kota stone slab flooring over 20mm
(Average) thick base of cement mortar 1:6 (1-cement: 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with
27 grey cement slurry mixedwith pigment to match the shade of slab Smt 14.50 1,010.92
including rubbingand polishing etc. complete. (A) 25mm thick
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)
base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material including dismentaling of
28 existing flooring and jointed with color cement slurry including finised Smt 79.00 1,053.32
with flush pointing & cleaning the surface etc. complete for light shade
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)
base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material including dismentaling of
29 existing flooring and jointed with color cement slurry including finised Smt 3.30 1,432.78
with flush pointing & cleaning the surface etc. complete for antiskit.
Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or
as specified in skirting risers of steps and dedo on 10mm thick. cement
plaster 1:3 (1-cement: 3-coarse sand) and jointed with white cement
30 slurry as per the detailed by Architect & direction of Engineer-in- Charge. Smt 40.70 1,169.98
Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps
and landing laid on a bed of 12mm thick Water proof cement plaster with
mortar 1:3 (1-cement : 3- coarse sand ) & Water Proofing Chemical Agent
31 and cement vata (10cm. x 10 cm. size) quarter round in cement mortar Smt 4.00 1,214.07
1:1 including neat cement finishing, watering etc. complete finishing with
flush pointing in white cement. (UG Tank Floor)
Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps
and dedo on 10mm thick Water proof cement plaster with mortar 1:3 (1-
cement : 3- coarse sand ) & Water Proofing Chemical Agent and finishing
32 with flush pointing in white cement. (UG Tank Walls) Smt 20.00 1,183.62
Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]
polished at all exposed Surface, Pre-moulded and pre-polished, machine
cut Granite of any colour and shade, & finish, as per detailed by architect
/ Consultantfor flooring, dado skirting, cladding, steps and risers, kitchen
platforms, vanity counters, window sills , fascias and similar locations of
required size, approved shade, colour and texture laid over 20 mm thick
33 mortar 1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting Smt 32.20 2,369.76
on In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement :
coarse sand), joints treated with white cement, mixed with matching
pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x 4 TO
mm as per detailed groove, rubbing, curing, moulding and polishing to
edges to give high gloss finish as per concept etc. complete at all levels.
Providing and fixing sandwich type platform including supplying and
fixing granite stone 18 mm thick mirror polished stones in top and side
position and vertical strip at front over 25 mm thick polished kota stone
34 platform fixing in top and sides and intermediates supports fixing with Smt 0.00 7,455.62
cement mortar and adhesive and finishing including making recess for
Kitchen/ Laboratory sink etc. complete as approved and directed by
Consultant / EIC.
Providing and laying broken chine mosaic flooring for terrace using
mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar
1:3 to plain or slope and to be tempered to bring mortar creme out upto
35 surface using white cement including rounding off junctions and Smt 116.00 765.97
extending them upto 15 cm along the wall,clearing with water and oxalic
acid etc. as directed.
Providing and fixing 35 mm thick (or as specified) ISI marked flush door
shutters conforming to IS : 2202 (Part I) decorative type, core of block
board construction with frame of 1st class hard wood, with 1mm. thk, ISI
marked designed laminate in any finish on both faces of shutters., slit
openings with bidding Patti & 6mm thk designed acid wash glass,.
36 Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with necessary Smt 21.00 3,944.05
screws, using branded S.S. matt /glossy / platinum finished accessories,
Colour / polishing all bidding parts, and also incl. with all Material,
labour, tools, tolerance, scaffolding etc. complete as per concept
/direction and approved by Architect, and directed by Engineer-In-
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-
DOMAL Series), hI-perfomance Sliding / Openable doors with shutter with
Glass/ Compated laminated sheet / HPL of required thick, captive bead,
extremely difficult to remove once glazed, high performance weather
stripping, internal wedge gasket, Bottom, side and top section including
necessary filling up the gaps at junctions, with required EPDM rubber/
etc. and ISI ebco make,"Lx. Premium" Required Finish door fixture
37 Accessories As per Architect Concept, High security interlocking bead, Smt 2.60 3,365.72
Sheet membrane flashing , 2" over jamb flashing, New Blocking with new
backer rod and sealant, channel glide with runner, slide fold hinge when
ever need of sufficient capacity, with warranty, all types of material,
labour, transportation, tools tolerance and matching required level with
Flooring etc. complete as per Architect concept and as per detailed by
Architect / consultant & Directed by EIC
Providing and fixing window having extruded aluminum Colour anodized
section frame main outer size 95mm x 24mm x 1.17mm @ wt.of
Kg/mt , horizontal Three track member size 92mm x 31.75mm x
1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x
1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member
38 size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of Smt 12.40 1,583.95
size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick
transparent bronze colour tinted float glass with powder coated
aluminum fittings and fixtures and transparent silicon sealant glass
fixing to frame as per details etc
Providing and fixing standared extruded of alluminium section of size
63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized
alluminium frame for ventilation with 5 mm thick frosted glass as details
39 etc complete for Ventilation Smt 1.50 1,175.56
Providing & Fixing M.S. grills of required pattern to wooden frames of
windows, RCC or as specified in drawings etc. with M.S. flats at required
spacing & frame around, square or round bars with round headed bolts &
40 nuts or by screws (A) Plain Grill, as per detailed & directed by EIC. Kg 248.00 105.18
Steel work, welded in built up sections framed work including cutting,
hoisting, fixing in position and applying a priming coat of red lead paint.
(A)In beams and joists, channels angles Tees, flats, with connecting
41 plates or angle cleats as in main and cross beams. Hip and jack rafters, Kg 224.00 91.08
purlins conneted to common rafters and the like
Finishing wall with Weather proof exterior emulsion paint on wall surface
(two coats) to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of loose powdered
42 materials.etc complete. Smt 257.10 117.40
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of
primer at Wall painting (two coats) with plastic emulsion paint of
approved brand & manufacture on undecorated wall surfaces to give an
43 even shade including thoroughly brushing the surface free from mortar Smt 395.60 121.64
droppings & other foreign matter & sand papered smooth, as per detailed
& directed by EIC.
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of
primer at Ceiling painting (Two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated Ceiling surface to give
44 an even shade including thoroughly brushing the surface free from Smt 110.50 127.19
mortar droppings and other foreign matter and sand papered smooth, as
per detailed & directed by EIC.
Painting two coats (including priming coat) on new steel and other metal
surface with enamel paint, brushing, interior to give an even shade
including cleaning the surface an even shade including cleanicn the
45 surface of all dirt, dust and other foreign matter. Smt 36.80 124.75
Providing and fixing roof panel shall be made out of 0.5 mm thick pre
coated GI sheet . The Precoated sheet shall be of minimum 240 mpa steel
grade confirming to IS 14246:1995 and shall have zinc coating of
minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on
both side of the sheet and polyester top coat 15-18 micron. The PPGI
Sheet shall have plastic protective guard film of minimum 25 microns to
avoid scratches during transportation. The ridge shall be fixed to the
steel members by pop rivet or self drilling/self stitching fastners @
maximum 450 mm c/c along length of capping/flashing etc complete .
Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304
grade using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia
SS pipe of 16 gauge, round balustrade of 32mm [50mm 16G Grade
with glossy finish consisting of 32 NB or nearest size vertical posts
Height at maximum spacing 900c/c with suitable cups at bottom and top
rail of 50 NB or nearest size & intermediate rails of 16 NB or nearest size
etc complete] with complete assembly of SS studs to house the horizontal
47 16mm pipes and top handrail, bend and coupler to be used as per Rmt 8.50 3,570.75
architectural detail drawings for the railing in parapet, stair etc. including
fabricating, hoisting, fixing in position with angle cleats, holdfast etc. in
RCC or masonry in true line level and plumb, including complete
assembly, including matt polishing and buffing complete, including
scaffolding etc. complete as directed by EIC.(Actual length of stair railing
shall be measured at site & same shall be paid. No wastage should be
measured or paid.)
Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR
type B pipe confirming to IS 13592-1992 with one end plain & other end
socket with rubbering & Fixing conforming to ISI 14735-1999 of
approved make for drain system pipe line, pipe shall be jointed with each
other with rubber lubricant, pipe shall be fixed on wall using PVC clamps
of the size 160mm dia x 210mm length x 196mm high at every 2000mm
48 centre to centre or shall be concealed in wall as directed necessary Rmt. 16.00 857.65
fittings such as bends, shoes, etc. incl. testing of pipe & joint & jointed
with adhesive solvent, cement incl. cost of all material etc. complete as
per detailed, directed & approved by the consultant / EIC.
Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as
per IS 9079 at
49 departmental stores with following MOC: Nos 1.00 24,240.00
Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410, 7.5Hp 24 m head
Providing laying and jointing in true line and level 75mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
50 two metre C/C or shall be concealed as directed including necessary Rmt. 30.00 280.23
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing laying and jointing in true line and level 15mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
51 two metre C/C or shall be concealed as directed including necessary Rmt. 40.00 72.65
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
52 two metre C/C or shall be concealed as directed including necessary Rmt. 40.00 91.84
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
54 fittings etc. including testing of pipe and joints and fixing the same with Rmt. 20.00 195.67
adhesive solvent, including cost of all materials.
Providing & Fixing gun metal check or no return full way wheel valve etc.
complete as per the instruction of EIC. (C) 25 mm. Dia
Providing & Fixing gun metal check or no return full way wheel valve etc.
complete as per the instruction of EIC. (E) 40 mm. Dia
Providing and fixing screw down bib taps of following size.(A) Brass screw
down bib tap polished bright. (i) 15mm dia.
Providing and fixing brass screw down stop tap.(B) 20mm dia.
Providing erecting and fixing double coated ISI water tank of required
capacity each with all necessary fittings and connection etc. complete on
Liter 1000.00 3.95
Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm
diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the
60 following nominal diameter of self cleansing design with C.I screed down Each 6.00 585.37
or hinged grating including the cost of cutting & making good the walls,
as per detailed, directed & approved by the EIC.
Providing and fixing S.W. gully trap with C.I. grating brick masonry
chamber and water tight C.I. cover with frame of 300mm x 300mm size
61 (inside) with standard weight.(i) Square mouth traps. (A) 100mm x Each 1.00 1,292.19
100mm size P type.
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Constructing brick masonry chamber for underground C.I. Inspection
chamber & bends with bricks having crushing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x
610mm internal dimensions, total weight of cover with frame to be not
less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top
62 slab with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone Each 1.00 2,932.93
aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls & bed concrete for (i) Inside dimensions 455mmx
610mm & 450mm deep for single pipe line. etc. complete as per
detailed, directed & approved by the consultant / EIC.
Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (
cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation
concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )
inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand )
finished with a floating coat of neat cement & making channels in cement
1:2:4 mix ( 1 cement : 2 coarse sand :4 stone aggregate 20mm nominal
size ) finished smooth complete including curing & testing… ( I ) inside
900mm x 1200 mm & 1.5 m deep including R.c.c. cover with frame size
560 mm diameter ( A ) with 230mm thick walls of brick masonry using
brick having crushing strength not less then 35 kg/sqcm in CM 1 : 5 (
cement : 5 coarse sand ), (2) B type depth 1.50 Meter for 150mm
diameter sewer.. etc. complete as per detailed, directed & approved by
the consultant / EIC.
Providing soak pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear
dimention including the cost of excavation, P.C.C. 1:4:8 and filling
brickbats with dry masonry work, Honeycomb masonary work, M:25
RCC. SLab incl. form work including FE-500 Reinforcemnt, M.S.cover, C.I.
64 Pipe & cowl vent, vatas in C.M. 1:3 with finishing curing etc. complete as Each 1.00 34,456.15
directed.. etc. complete as per detailed, directed & approved by the
consultant / EIC.
Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe
confirming to IS 13592-1992 with one end plain & other end socket with
rubbering & Fixing conforming to ISI 14735-1999 of approved make for
drain system pipe line, pipe shall be jointed with each other with rubber
lubricant, pipe shall be fixed on wall using PVC clamps of the size
160mm dia x 210mm length x 196mm high at every 2000mm centre to
65 centre or shall be concealed in wall as directed necessary fittings such as Rmt. 10.00 834.38
bends, shoes, etc. incl. testing of pipe & joint & jointed with adhesive
solvent, cement incl. cost of all material etc. complete as per detailed,
directed & approved by the consultant / EIC. (A) 160mm dia. etc.
complete as per detailed, directed & approved by the consultant / EIC.
Providing & Fixing white colour, Vitreous china, under / Over Counter
wash basin with single hole for pillar type with Cl or MS brackets painted
white including cutting holes, ranking bolts for Fixing & marking good
the same, including Fixing C.P. Brass waste coupling 32mm dia & Bottal
trap & 15mm dia pillar tap, Bottle Trap, as approved, capstan head C.P.
screwed down high pressure with screw shank & back nuts & rubber
66 plugs, 15mm dia brass stop cock (50/75mm p.v.c. Drain connection pipe, Each 4.00 2,678.07
Water Connection Pipe of required Size, & testing the same for leak proof,
etc. with all material & labours to complete this job in all respected
manners, etc. complete as per detailed & approved by the consultant &
directed by EIC.
Providing and fixing wash down water closet (European type, W.C. Pan)
with integral P or S trap including jointing the trap with soil pipe in
Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and
67 cover for wash down water closer with C.P. brass hinges, C.P. brass toilet Each 3.00 6,076.82
paper holder, Jet Spray, Metropole flush valve Incl. Connection and rubber
buffers. (A) Vitreous China., etc. complete as per detailed & approved by
the consultant & directed by EIC.
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & Fixing C.P. brass towel rail Approved Make complete with C.P.
Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc.
complete as per detailed, directed & approved by the consultant / EIC. (B)
600mm x 20 mm size, etc. with all material & labours to complete this
job in all respected manners, etc. complete as per detailed & approved by
the consultant & directed by EIC.
Providing & Fixing 600mm x 450mm beveled edge mirror of superior
glass mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to
69 wooden plugs with C.P. brass screws & washers, etc. with all material & Each 4.00 851.13
labours to complete this job in all respected manners, etc. complete as
per detailed & approved by the consultant & directed by EIC.
Providing & Fixing handicap toilet set with European Closet & wash basin
& all handicap requirement with dual flush tank, seat & lead (heavy duty)
including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted brackets,
Waste Coupling, 32mm size bottle trap etc. all Internal fittings complete
with grab rails, swin type grab bar etc. rubber buffers, C.P nuts, bolts etc
70 making holes in walls & floors, & finishing for ready to use. The rate Set 1.00 40,425.96
includes all necessary connection charges as per product detail to the
satisfaction of Architect / engr. in-charge where required & the final
handing over etc. complete as per specifications, drawings & as directed
by the Engineer-in-charge. The scope includes Providing and fixing all
the necessary fittings of approved brand and as per directed by
Architect/EIC.
Providing and fixing Urinal or approved quality including conecting the
71 Urinal with waste pipe , tap flush cock etc. complete.(A) White Each 2.00 1,316.96
earthenware flat back or corner type size 430mm x 260mm x 350mm.
Pro. And fixing single layer water proof gypsum board 12.5 mm thick
sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm
suspended by GI suspender channel of size 25 mm x 3 mm with
intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm
center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at
72 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x Sqm 16.00 606.95
0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener,
scoch bolt connecting cleat,joining compound top coat on ceiling
incl.making necy.opening for light fitting,diffuser etc. comp. as per detail
drawing as directed
Providing & fixing office table / staff table having ht of 750 mm Top,
with 19mm thk plywood Structure or with MS Pipe Structure of Frame as
table is also made up of 19mm Thick. Top of Table is 19mm thk ply with
laminate Finish Per Requirement and All internal & external Joints
finished with teakwood beading Patti. Item includes fixing of drawers and
keyboard tray and storage with shutters under table as per drawing. With
73 grooves shown as per drawing. All exposed and internal surfaces covered Sqm 8.10 15,695.59
with Laminate Finish of approved shade & Complete as per detail
drawings & as instructed by Architect/consultant/ Engineer In charge.
Complete with all necessary hardware like nails, ss screws, table chain,
TDS channel, adhesives etc. Contractor has to provide all necessary cut
outs for Electrical works & no extra payment shall be made for it.
Storage with Shutter (Laminate FINISH)
Providing & fixing Any Height storage having Any size of having depth of
350mm/450mm/600 mm, having skirting of 75 mm, with proper locks.
includinf of vertical supports & horizontal shelves shown as per drawing
made by 19 mm thick Marin ply, having shutters of 19 mm thick ply or
Clear Glass with using 12 mm thick Marin ply for framing. All complete
with proper teakwood beading. and Teakwood molding as per design.
Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick
Laminate & internal surfaces are covered with 1 mm thick laminate. Nos 5.70 9,997.93
External & internal joints covered with beading Patti complete with Polish
finish. With grooves shown as per drawing All complete with proper
hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, cable
manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as
per shown in detail drawings & as per instructions of architect/consultant
/ in charge engineer
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and fixing Directional and Informative Signages- Providing and
fixing in position informational signage made of 3mm thick high grade
cast acrylic sheet of approved brand and color, it shall
75 featurecomputerized vinyl lettering. Work includes laser cutting of the Sqm 0.70 9,175.85
acrylic sheet to the required size and shape and mount on wall with SS
Spacer studs as per drawing and directed by Architect.
Providing and Fixing Office Name in Gujarati/ English Letter SS304 1mm
thick letter 1.5" depth 10" Height with Logo with Duco color & fitting as
per direction of Architect & EIC.
Supplying and providing High Back Mesh office Chair As per specification
-Metal frame seat made of Mesh fabric upholstery (foam base)
-Adjustable Head rest
-Fixed Arm rest
77 -Knee tilt mechanism Nos 1.00 10,738.07
-360 swivel motion/ 100mm stroke gas
-Nylon Star base
-Pushback mechanism & Comfy seating.
-Complete as per architectural design and concept and approved by
Architect & Client.
Supplying and providing Mid Back Mesh office Chair As per specification
-Metal frame seat made of Mesh fabric upholstery (foam base)
-Center tilt mechanism
-100mm class 4 gas lift
78 -PP Fixed Arm rest Nos 6.00 5,024.65
-Nylon Star base/Twin wheel nylons casters
-Complete as per architectural design and concept and approved by
Architect & Client.
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of
sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length , in below type of pipe
erected with 6A Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured/metallic/white front Pt. 41.00 582.77
plate modules erected on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with
medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling completeCat. III
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of .ISI marked 1.1 kV Grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected
with 6A Modular type switch and hum free EME step type electronic fan
regulator mounted and accessories with earth continuity of following
80 type erected on PVC / Metallic/Wooden box, single mounting base frame Pt. 9.00 809.01
covered with textured/metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completeCat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)
both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden
box covered with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories.[I] For 6A
Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby
switchboard/mcb db board(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completeCat. III
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Point wiring for on board Looped Plug with 6A Modular type switch &
pin socket erected on PVC / Metallic/Wooden box, single mounting base
82 frame covered with textured / metallic/white front plate modules erected Pt. 9.00 309.06
on / in wall / ceiling with following type accessoriesCat. III
Providing following type of Modular Type Accessories mounted with PVC
/ metallic/Wooden box, single mounting base frame covered with
83 textured / metallic/white front plate , modules erected with necessary Nos 6.00 160.59
connections as per site situation directed by Engineer In charge.(3) Two
Pin/RJ-11 Telephone Socket, [A] For One Gang, Cat.III
84 (4) TV Co-axial Socket outlet, Cat.III Nos 2.00 160.59
85 (9) 16 Amp. SP one way switch , Cat.III Nos 12.00 180.79
86 (10) 6/16Amp. Universal socket, Cat.III Nos 12.00 199.98
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
87 erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper Mtr. 135.00 104.03
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size, (A) With medium class Rigid PVC pipe and
accessories , (b) 2 wire 2.5 sq. mm
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
88 erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC Mtr. 300.00 140.39
insulated stranded wire of green colour for earth continuity of following
size, (A) with medium class Rigid PVC pipe and accessories, (a) 2 wire
89 (h) 4 wire 6 sq. mm Mtr. 15.00 326.23
Providing & Erecting approved make following size of TV Co-axial flexible
cable comprising inner conductor of solid bare copper insulated with
90 Foam PE & Secondary conductor made of poly - Aluminium film bonded Mtr. 24.00 39.39
Al. Braids @ suitable coverage overall sheathed with black PVC
insulation.(b) RG-6
Supplying & erecting approved make Telephone Cable electrolytic copper
conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC
tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for
telephone wiring & confirming to C-DOT erected in existing pipe. of
following size of conductors & nos.of pairs. With necessary connections.
[A] Conductor Size 0.5 mm, (a) Unarmoured(2) Two Pairs
Supplying & erecting approved make LAN cable of following size in
existing pipe as per direction[C] CAT -
Providing & erecting Switch board for Computer or electric apparatus
consisting of following modular type accessories mounted with PVC/
Metallic concealed/ open box with single mounting base frame covered
with textured/ metallic/ white front plate,modules erected with necessary
93 connections as directed Nos. 13.00 1,133.22
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug
For Modular Type Accessories
Call bell gong type suitable for 230 volts, 50 Hz. AC supply complete
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. & corrosion resistance
with diffuser with company mark/name 160V to 270V, Power Factor
95 more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> Nos. 18.00 373.70
85 lumens/watt, LED LED driver efficiency > 85 % ( fitting required LM-79
& LM-80 Certificates) (NOTE: Below description have shown ranges of
wattage capacity between the ranges shown.) (A) Tube Light with integral
driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet, Cat.III
Supplying and erecting led lamps with following wattage capacity of
to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge
96 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 Nos. 1.00 112.11
lamp holders, pf >= 0.5, (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder, (ii) 5 to 8 watts, Cat-III
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/ CRCA/
aluminium pressure die cast powder coated and high U.V. & corrosion
resistance with diffuser housed in aluminium casted body with company
mark/ name
97 160V to 270V, Power Factor more than 0.95, THD < 15 %, CCT 3000 K to Nos. 14.00 589.84
6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description
have shown ranges of Wattage capacity of LED fittings.The Engineer
Square/ Circular shaped Surface/Recessed Mount Downlight with
provision for spring loaded mounting clips complete.IP20, (iii) 16-20
watts, Surge-2 kVCat-lll
Supplying and erecting LED street light / Flood light fittings with High
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
98 5700K,Uniformity ratio > 0.45, Luminaire efficacy > 100 lumens/watt . Nos. 1.00 4,248.06
LED driver efficiency > 85 %.( fittings required LM-79 & LM-80
certificates) (NOTE: Below description have shown ranges of Wattage
capacity between the ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC line supply with
over-voltage protection. (ii) 48 - 59 Watts Cat-III
Providing and erecting Miniature circuit breaker single pole 0.5A to 2A
99 system and having breaking capacity 10 KA to be erected in existing Nos. 1.00 297.95
box. confirming to IS 8828/1996 with ISI Mark , Cat-III
Providing and erecting Miniature circuit breaker single pole 6A to 25A
suitable to operate on 240 V A.C. system and having breaking capacity
100 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Nos. 18.00 123.22
Mark, Cat-III
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C
101 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing Nos. 2.00 811.03
box having following capacity (c)63 Amp. Cat-III
Providing and erecting Sheet Steel powder coated MCB distribution board -
flush / surface mounted fitted with busbar, neutral link, earth bar and
DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to
102 house appropriate nos. of MCBs.(The DBs should be used of same Nos. 1.00 355.52
company of MCB to be used) suitable for, (A) single phase incoming and
horizontal single phase outgoing, (a) single door (IP-30)(i)4 way
(B) three phase incoming and single phase horizontal type outgoing Per
phase isolation type (PPI)(b) sheet steel double door(ii)6 way
providing and erecting Approved make RCCBs conforming to IS:
and having sensitivity of 30 mA and Short Circuit withstand capacity of
104 10 KA and suitable for operation on single phase 240 V,50Hz. having Nos. 1.00 2,458.34
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component. for following Max. rating erected
as directed, (ii) 40Amps. DP Cat. III
Providing and erecting Annealed bare Copper wire 4.064mm to
Providing and erecting Pipe type earthing having 150 cms.long and
106 cms. dia. galvanised iron pipe with coupling and buch buried in specially Nos. 2.00 368.65
prepared earth pit complete with necessary 8 SWG earth wire.
107 For using salt and charcoal / coke as required for pipe type earthing. Nos. 2.00 171.70
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying & erecting earth pit of minimum bore dia.150mm size
approved make Earthing Electrode consisting Pipe-in-Pipe Technology as
per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having
Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe
dia of 25 mm having 200-250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following type of
applications with chamber and heavy duty cover. (A)(approved make OEM
has to submit test certificate including value of earth resistance of
108 installation duly stamped and signed by agency and officer Incharge has Nos. 1.00 4,591.46
to ensure the value of earthing resistane mentioned in test Certificate) &
having back filling compound of (B) Inner chemical (CCM Compound)-
Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain moisture
for long time Necessary test report must be submitted by Agency. (a) For
Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable
109 Aluminium conductor for 1.1 kV. to be laid on wall with necessary Mtr. 20.00 112.11
clamps or in existing trench / pipe of following size of cables. (B) 2 core
Providing and, fixing heavy duty flange type brass cable gland with
110 rubber ring for PVC insulated armoured cable complete with out going Nos. 2.00 38.38
tails, insulating tape etc for following size of cables.(B) 2 to 4 core 6 Sq.
Solder less crimping type Aluminium lugs conforming to IS suitable for
111 cable of following size evenly crimped with high pressure tool & Nos. 8.00 6.06
connected to switchgear terminals with brass/ cadmium plated nut bolts
in an approved manner.(A) 1.5/ 2.5/4/6 Sq.mm
Providing and erecting Approved make Ceiling fan with double ball
bearing ISI mark with condenser A.C. 230V.50 Hz.1200 mm. sweep
112 complete, canopy erected on existing hook or clamp with earthing. [Make Nos. 9.00 1,596.81
shall be approved by Engineer in charge]
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.
Pipe down rod erected duly painted for fan complete with proper
insulation without leakage and earthing.
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to
the RCC bars up to 50mm length each side and pierced through a
114 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Nos. 9.00 108.07
Ceiling with necessary finishing.
Supplying & erecting single phase approved make industrial exhaust fan
suitable for medium duty ring mounted low noise operation suitable for
115 medium duty having following dia size and maximum speed in RPM, [A] Nos. 4.00 2,054.34
300-305 mm dia 900 RPM, Cat.II
Supplying & erecting approved make SMC press moulded composite
FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite
connector strip 5way (3P+N+E), DIN rail for mounting mob & hinged
116 doors as per requirement having locking arrangements with mounting Nos. 1.00 476.72
clamp with nuts, bolts & washers suitable for erection on pole with cable
clamps& earth bolt of following size of box.(C)150mm x 125mm x
100mm [deep]
Supplying and erecting B class galvanised iron pipe 32 mm outside dia
117 cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, Nos. 1.00 343.40
erected on wall or corner for mounting street light luminaire with
necessary hardware materials duly painted.
Total Amount Rs. =
Total Amount Rs. =
Schedule B
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
I/We am/are willing to carry out the work @............ % above/below percent ( should be written in
figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as
Estimated amount put to tender Estimated amount put to tender
Deduct:……………………...….% below Add……………………..……..% above
IN words IN words
(Please strike out whichever is not applicable.)
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
is a change as per actual mix design the cost of difference of cement consumption have been deducted from
the rate of original item at the rate of input rate mentioned in all the tender.
Signature of Contractor with Seal Signature of Contracting Authority with Seal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
0.0 GANDEVI SBD RFO OFFICE.pdf
1.0 SCHEDULE-B RFO OFFICE GANDEVI.pdf
2.0 SPECIFICATION INDEX GANDEVI.pdf
3.0 DETAILED SPECIFICATION CIVIL.pdf
3.1 General Technical Specifications.pdf
3.2 R and B Specifications Booklet Electrical.pdf
4.0 LIST OF APPROVED MAKE LIST CIVIL.pdf
4.1 LIST OF APPROVED MAKE ELECTRICAL.pdf
4.2 PLUMBING MAKE LIST.pdf
Gandevi_Drawings.pdf
RFO OFFICE GANDEVI.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .