Providing of multi stage Submersible pump of specification 4000 GPH x 250MH coupled with motor. The recommended make at pumping station Kalkash Bore well

Amount

Providing, of multi stage Submersible pump of specification 4000 GPH x 250MH (Head Range +10-25) coupled with motor. The recommended make of Pump should be KSB/ Kirloskar / Calama / Crompton/ Lubi along with Motor. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves.

Labour charges for carriage of submersible pump 4000GPH x250MH along with allied equipments shifting the same by means of mechanical transport to unloading site at road side 1km approx. Away from pumping station kalkash bore well including labour charges/ crane charges for loading and unloading of pumping machinery. Shifting the same from unloading site to inside the pump room by using skilled labour/ crane, wooden / Bamboo bars, manila rope and hire charges of tools and tackles required for shifting the same. Complete job.

Installation , testing and commissioning of SPS 4000 GPH X 250MH at pumping station kalkash along with allied electromechanical works by way of fabrication & fitting of GI pipe nipples welded with MS flanges-3 inches dia for making delivery of the pump. Fab / fitting of GI pipe nipple with threads at one end & MS flange at other end & fastening of nipple with the delivery of pump. P/F of MS bends 2.5 inches dia. with MS flanges. Providing Fitting of MS clamps 2.5 inches dia. - 02 No. for holding submersible pump & nipples. Fab/ fitting of bed plate for resting of clamps holding submersible pump & nipples. Fabrication of GI Pipes 14 No.with providing MS Flanges 2.5 inches.(GI Pipes providing by Deptt.) Lowering of pump/motor along with GI pipe nipples 14 No into the bore well with the help of chain pulley block , ropes & skilled/unskilled labours .Job also includes fabrication of gantery for lowering of pump and motor as per site requirement.P/F of one no 2.5 inches dia sluice valve & one no check valve 2.5 inches dia with MS flanges , nut/bolts & washers. Complete job include skilled/unskilled labour ,material charges and fitting charges .

Electrical installation:- Fabrication of the panel box made out of angle iron and having a size of 6'x 3'. The angle iron is to be welded at corners properly and fitting of Ampere metre/ Volt metre 01 No Providing/fitting of 200 Amp 415V HRC type main switch (H/DUTY) -01 no, Automatic submersible control panel of suitable capacity equipped with all protection devices and relays. Providing, fitting, Testing and Commissioning of 120mm sq.3.5 core un armoured aluminum cable for connecting supply from LT side of transformer to bus bar and then up to Main switch.Providing/ fitting of 10 mm square submersible cable -01 roll for making of connection from panel to motor with proper thimbling and insulation. Checking continuity of whole electric circuit. Testing and Commissioning of electro mechanical works by checking of all electrical connections, tapping and tightening all other connections. Complete job includes cost of all sort of material and labour charges.

Testing and commissioning of submersible pump motor set all other allied electro mechanical works. Checking of all electrical connections, tapping and tightening all other connections. Plugging of leaking joints if any by way of welding, replacement of gaskets and tightening of nuts and bolts. Checking the alignment of pump and motor sets and testing the machinery on full load. Complete job.

G S ENGINEERING WORKS

BEE AAR ENTERPRISES