Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC DUNIYAGANJ DUNIYAGANJ PHULPUR PHULPUR ALLAHABAD UTTAR PRADESH 212402 | PRAYAGRAJ | UTTAR PRADESH | 212402 | L1 | Accepted-AOC QUOTED AMOUNT IS LOWEST AND RESONABLE | |
| 2 | L2₹20.3 L+₹1,307.50 (0.06%)Rejected-AOC Q 49 NEAR DEOGHAR COLLEGE MAIN GATE PO PS DEOGHAR JH 814112 | DEOGHAR | DEOGHAR | JHARKHAND | 814112 | L2 | Rejected-AOC QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE | |
| 3 | L3₹21.3 L+₹1.0 L (4.96%)Rejected-Finance GALI NO 4 GAUSHALA ROAD VIKASH NAGAR RAMGARH CANTT RAMGARH JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L3 | Rejected-Finance BID IS NOT LOWEST AND NOT RESONABLE | |
| 4 | L4₹22.1 L+₹1.8 L (8.91%)Rejected-Finance VIKASH NAGAR GAUSHALA RAMGARH CANTT 829122 RAMGARH JHARKHAND | RAMGARH | JHARKHAND | 829122 | L4 | Rejected-Finance BID IS NOT LOWEST AND NOT RESONABLE |
Tender Value
₹23.7 L
EMD Value
₹47,400
Closing Date
4 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE RAMGARH CANTT
SPL REP TO BLDG NO T-08B AT RAMGARH CANTT
2023_MES_626953_1
8300/3210/E8
Open Tender
Civil Works
Item Rate
180 days
GE RAMGARH
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE RAMGARH
₹47,400
Yes
24 Jan 2024
6 Nov 2023
11 Dec 2023
6 Nov 2023
4 Dec 2023
20 Nov 2023
Amount
M&L for Brick work using old size bricks , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.
S&F roof trusses (framed), trussed, purlins, crane gantries ,rail,rafter, heavy bracket framing (beam, tee, angle, channel or flat sections) distance pieces, cleats,fastening including fabrication and fixing conforming to Fe-410-W(Gde E-250) quality-A complete all as specified & directed.
M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
M&L for rendering 15 mm thick on brick masonry/ concrete surface etc in CM (1:4) in two layer ,surface finished even & smooth without using extra cement with & including mixed water proofing compound complete all as specified and directed. (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")
.M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper(OBD) over a coat of alkali resistance primer complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of primer and a layer of wall care putty (not less than 1.5 mm thick )complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of cement based paint over a coat of cement primer complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick masonry wall / concrete surface finished fair and even etc.( without using extra cement) complete all as specified and directed.
M&L for preparation of newly plaster surface wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mm x 300 mm x7 mm thick ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed. .
M&L for 50 mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sub-base of floor/hardstanding etc surface finished even and rough to receive the topping etc complete all as specified & directed.
Demolition of stone slabs and tiles of any description or thickness,laid bedded and pointed in any mortar in floors,wall, aprons etc.complete all as specified and directed.
S&F factory made solid panel PVC door shutter (wood grain printed PVC sheet used instead of plain colour PVC sheet used and 5mm thick and 15mm wide PVC sheet beading used inside the style and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading) 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 52mm thick PVC partition consisting of 12 mm thick plain solid PVC ply sheet reinforced with frame work made from 40 mm x 20 mm mild steel tubes. In between two mild steel tubes, 5mm thick Plain heat moulded 'C channel of size 75mm x 50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last mild steel tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cementcomplete all as specified and directed. .
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grained printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with mild steel square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.
S&F 6 mm thick figured glass pin headed type in squares/ rectangular exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/ shutters with rubber neoprene beading complete etc all as specified & directed.
S&F Solid PVC frame (single rebated) of size 60 mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S & F 30mm thick single piece, coloured ABC (ACRYLONITRILE BRUTADINE STYRENE) coated, PUF filled door shutters with PUF (Poly Urethane Foam) insulation of minimum density 40 Kg/Cum filled in between two ABS sheets of thickness 1.2mm (min), border covered with insitu pasted ABS strips of width equal to thickness of door shutters, 1.2mm thickness, reinforced with two number 10mm CTD bars, pre-embedded with wooden blocks of suitable sizes for receiving hinges, tower / sliding bolts, towel rails, handles etc, with/without embossed pattern complete etc all as specified & directed.
Taking down chowkats or frames with shutters exceeding 1.5 Sqm sqm but not exceeding 4.00 sqm each (without taking off shutters from the frames) etc including builders hardware etc and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.
SS&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.
S&F 300mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F 100mm size butt hinges medium weight cold rolled stainless steel(SS) complete all as specified and directed .
S&F 150mm aluminium alloy handles, cast type, anodised complete all as specified & directed.
S &F powder coated aluminium work for doors, windows, ventilators shutters(fixed/sliding track two or three track) and partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle, C.P. brass/ stainless steel screws, all complete all as specified and directed.
S&F powder coating of any colour (thickness or powder coating not less than 50 micron) anodised , windows, ventilators shutters , fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium, snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1No.),100mm long hinges type B-21 (2Nos), suitable handle(02 Nos.) in each door top rail guide rail etc. complete all as specified and directed.
M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engr-in-Charge .
M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed
S & F in repair 25 mm dia aluminium anodised curtain rods having wall thickness 1.0 mm finish ,colour & pattern with fixing brackets ,steps,rollers etc and like as approved by GE complete all as specified and directed.
S&F Factory made 12 compartment locker storage (12 inch width x 18 inch ht x 18 inch depth size of one compartment and over all size 36 inch width x 78 inch ht x 18 inch depth ) made out of CRCA sheet with combination of 20SWG and 22 SWG material with powder coating finish & pigeon hole(sketch as Appx A) in each storage & Locking provision in each compartment complete all as specified and directed.
Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.
Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
S&F in repair bib taps(weight of 400 gm) cast copper alloy with capstan head or butter fly handle,chromium plated fancy type screwed down with high pressure screwed for iron pipe and fixed 15 mm bore complete all as specified & directed.
S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair angle/stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore complete all as specified & directed.
S & F in repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specifed & as directed.
S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.
S&F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed
S&F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed
S&F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed.
S&F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed.
S&F in repair 75 mm PVC(SWR) bends any radius with access door complete all as specified and directed.
S&F in repair 110 mm PVC(SWR) bends any radius with access door complete all as specified and directed.
S&F in repair 75 mm PVC (SWR) vent cowl complete all as specified and directed.
S&F in repair 110 mm PVC (SWR) vent cowl complete all as specified and directed.
Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.
Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
S & F in repair 300 mm long rat tail helical door spring including roller and roller plate complete all as specified and directed.
S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.
S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F Toilet paper holder, vitreous China, box type complete all as specified and directed.
S & F health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified & directed.
S & F in repairs corner piece of acrylic sheet, 30 cm radius fixed with screwed colour and design as approved complete all as specified & directed.
S & F vitreous China bowl urinal, flat back coloured of size 465x355x265mm, white (minimum) with grating and union for discharge pipe, fixed in repairs , including providing and fixing plugs, bedding urinals against the wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around the urinal back in cement, including fixing automatic flushing cistern with brackets, PVC flush pipe 32 mm bore (grating and Union for discharge pipe etc.complete all as specified and as directed.
S & F vitreous China wash basin, any colour, flat back size 580 mm X 450mm including 32mm brass chromium plated waste coupling ,PVC 32 mm bore waste pipe, chromium plated Grating including bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.
S&F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.
S&F in repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.
S&F foe exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre having thickness 8mm for fixing in 600 mm x 600mm grid complete all as specified & directed. Note: Frame work for ceiling shall be measured and paid separately.
S & F for providing aluminium snap grid frame work for false ceiling system with size 605 mm x 605 mm, consisting of main runner of size 36.5 mm x 25 mm x 1.4 mm (weight not less than @ 0.24 Kg/Rm) and cross Tee of size 23.5 mm x 36.4 mm x 1.4 mm (weight not less than @ 0.191 Kg/Rm). The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40 mm X 25 mm X 2 mm (weight not less than @ 0.36 Kg/Rm).The snap grid shall be fixed to ceiling supporting hangers consisting of 6 mm dia. G.I. wire, J-bolts ,nuts and washers as per manufacturer's instructions(upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and complete all as specified and directed by Engr-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified & directed.
M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified & directed.
Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.
Taking down carefully unserveciable/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.
M&L for following point wiring controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.
(a) One fan point
(b) One 3/5 pin socket outlet 5 amp on same board with other switches
M&L for point wiring FRLSH cable PVC for the 15 amp 3/5 pin socket power point controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 2.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall & 2.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.
S& F switch piano flush button single pole one way 5 Amps, complete all as specified and directed.
S & F socket outlet 2 in 1, 3 pin, 5Amp/6 Amp, flush type, universal, complete all as specified & as directed
S & F socket outlet 2 in 1, 3 pin, 15Amp/16 Amp, flush type, universal, complete all as specified & as directed
M & L Sub main wiring two runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable of size 2x 6 .0 Sq.mm of voltage rating 1100V & drawn in and including concealed non metallic rigid medium grade (ISI marked) PVC conduit of dia not less than 20mm with standard accessories alongwith one run of 6.0 Sqmm PVC (green colour) insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire complete and making good disturbed surface wall including taking down of existing conduit or batten complete all as specified and as directed. Note-Two runs of single core PVC cable 6.0 Sq.mm with one run of 6.0 Sq.mm as earth wire conductor and conduit shall be measured as one unit.
S & F ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified & as directed
S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.
S&F LED bulb of capacity 10 watts lumen out put (1200) length 102 mm dia 56 mm base cap B22, (ISI marked) complete with all accessories base (ISI marked) complete all as specified and as directed.
S & F in repair of landscape cylindrical shape LED bollard light with integrated driver, including establishing on ground connecting to the existing cable and make it functional complete all as specified and as directed.
S&F in repair cable junction box of size 155 x 210 x 92 GFS polycarbonate, halogen free and weather proof, UV resistant rainwater proof, halogen free glow wire test in accordance with IEC 60695-2-II 960 C flame retardant self extinguishing suitable for cable size 10 Sq mm IP 66, with terminal complete all as specified and as directed.
S & F LED tube light fitting 1 x 20watt , 220 V, AC, decorative box type with driver ,holder including LED tube light surface and wall mounted LED batten PVC housing with polycarbonate diffuserand integrated electronic driver complete with all accessories ,driver, holder including LED tube light connecting up with three core flexible copper conductor cable and flexible pipe from connector of suitable size/dia from ceiling rose to fitting, complete all as specified & as directed
S & F in repair LED light fittings 1 x 9/10 watts integral slim LED batten with high out put diffuser 2 feet long ,220 volt ,AC decorative type with driver holder & LED lamp & all other accessories duly pre wired and making connection with and including flexible copper conductor cable and flexible pipe of suitable size/dia from connector to ceiling rose not less than 1 mtr fixed on wall with plastic gutties complete all as specified & directed.
S & F plastic body Exhaust fan of 150 mm sweep blade with louvers shutter , frame single phase ,240 V,50 Hz,900 RPM AC ,copper winding, including provision of hole, mounting frame, nut, bolts, washer, fasteners etc and connecting exhaust fan to ceiling rose including provision of flexible copper conductor cable and flexible pipe from connector of suitable size/dia of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified & directed.
S&F 1X9 W/1X10 W watt LED Bulkhead fitting with IP 65 environmental frendly, ultra modern, energy saving mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LED 230 Volts AC circuit ncluding provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified & directed.
S & F in repair of building security lights with new generation energy saving & environment friendly long life versatile pressure dia-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver type LED street light fitting 35/36 watt 230 V AC LED & including all necessories duly pre-wired ,fixing on existing bracket with nut ,bolt,& washers as required at site for fixing of street light on LT pole/wall complete all as specified and directed.
M&L for providing bracket made out of 40mm light grade GI pipe bend to shape as per site requirement not less than 1.50 m long fixed to wall/pole with & including nuts, bolts of 12 mm dia 100 mm long including washer, 50 x 6 mm size clamps-03 Nos etc and applying two coat of aluminium paint over a coat of primer on steel surface including taking down/ dismantling of old unserviceable brackets complete all as specified and directed.
S & F in replacement of double door SPN distribution boards steel sheet powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 415 Volts suitable Amps rated busbar 8 way complete all as specified and directed.
S & F miniature circuit breaker (MCB) SP 6 to 32 Amps ('B' Series) having current rating 10 KA,240 Volt in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S & F miniature circuit breaker (MCB) double pole 32 amp to 40 Amps (B' Series) ISI marked having current rating 10 KA,240 Volt in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply, laying , jointing & testing LT under ground cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty) with standard aluminium conductor , 1100 Volts grade of cross sectional area 4 Sqmm 2.0 core cable complete all as specified and directed. Note:- 1. Excavation & earthwork shall be measured & paid under respective item (2) All Necessary T & P required shall be arranged by the Contractor.
Supply, laying , jointing & testing LT under ground cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty) with standard aluminium conductor , 1100 Volts grade of cross sectional area 16 Sqmm 2.0 core including taking down of existing unserveciable/old cable complete all as specified and directed. Note:- 1. Excavation & earthwork shall be measured & paid under respective item (2) All Necessary T & P required shall be arranged by the Contractor.
Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr in width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes, foundations, etc. complete all as specified and directed by Engineer-in-Charge.
Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.
Supply and spreading clean, dry, fine river sand for UG electric cable in two layers (8cm thick before laying of cable & 15cm thick after laying cable to a total of 23cm) including gentle punning the sand upto 18cm (total thickness) and consolidated around cable for protection of UG cable complete all as specified and directed. NOTE:- For measurement purpose punned thickness shall be considered as per clause 19.75 of SSR Part-I.
Supplying & Laying un-reinforced pre-cast flat concrete cable protection cover of class LV , type- I, size 250 mm x 150mm x 40mm, factory made, complete all as specified and directed by the Engineer-in-Charge.
S & F in repair for High density polyethylene (HDPE) pipe of 40 mm dia sutable for 6 Kgf / sq.cm working pressure complete all as specified and directed by Engineer-in-Charge.
S & F in repair for High density polyethylene (HDPE) pipe of 20 mm dia sutable for 6 Kgf / sq.cm working pressure complete all as specified and directed by Engineer-in-Charge.
S&F in repair Rigid non-metallic PVC conduit 25 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete for poles/DBs with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below normal ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point,GI tubing 20mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel & wire mesh,charcoal dust and common salt 15cm in layers all round the earth plate, 40 mm thick pre-cast RCC cover (1:2:4) type B-1(using 20 mm graded crushed stone aggregate )reinforced with 8mm dia TMT bar @ 75mm c/c both way with mild steel handle 20mm dia round bar , plastering 15mm thick with CM (1:6:) internally and upto 150mm below ground level externally and chamber of (size of pit 300 mm x 300 mm x 300mm internal diamentions) PCC (1:3:6) type C-1(using 20 mm graded crushed stone aggregate ) (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m & returning filling) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I including taking down old/ unserveciable existing earthing & making good disturbed surface of wall ,floors etc.complete all as directed. Notes: -(i) Earth lead & protection pipes length upto & including 7.50 metre. (ii) Earth filling shall be done by vegetable soil. (iii) Soil should be free from stone, boulders, aggregate, gravels etc.
S & F for LED flood light luminaries of 120 watt with pressure die cast aluminium housing with sealed toughened glass cover in frame ,IP 65 protection and with all fixing arrangement , nuts, bolts and washer connecting to electric system with 2.5 Sqmm PVC aluminium stranded conductor 2 core up to require length and to be fixed on 11 Mtr long pole including taking down old unserviceable fitting any type and description complete all as specified and directed.
S & F for Inveter LED bulb of capacity 12 watts lumen out put (1200) length 140 mm width 70 mm base cap B22 ,3 star, (ISI marked) complete with all accessories base (ISI marked) complete all as specified and directed by Engineer-in -charge.
Boring of hole under road, pavement, hard standing without disturbing existing surface by using manual boring technique with required tools complete all as specified and directed by Engineer-in-Charge. Note : Pipes shall be laid minimum 1.00 mtr below/under existing road surfaces/taxi track / apron /floors etc.complete all as specified and as directed.
simplex infra project
M/s Ray construction
M/S Parmar Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .