ICDS

Name of Work :-

Constructing of Aaganwadi at Various Villages Of Petlad/Sojitra Taluka Pkg

no AND/ANGANWADI/2026-27/35

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item

(with brief specification and reference to Quantity Unit Amount

No book of specifications)

1 Excavation for foundation upto 1.5 m depth including sorting 211.000 Cum 212.52

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 Providing and laying cement concrete 1:4:8 (1 cement : 4 52.000 Cum 2945.16

coarse sand : 8 B.T. machine crushed stone aggregates 40 mm

nominal size) and curing etc. complete excluding cost of form

work in foundation and plinth.

3 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 32.250 Cum 4659.21

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in (A) Foundations, footings, base

of columns and mass concrete.

4 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 4.500 Cum 8022.71

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Columns up to Plinth level.

5 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 25.750 Cum 4567.76

using B.T. stone aggregate & curing complete including the cost

of form work but excluding the cost of reinforcement for R.C.C.

work in Ground Beam.

6 Filling available excavated earth (excluding rock) in trenches. 87.000 Cum 136.92

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each deposited layer by ramming and

7 Brick work using common burnt clay building bricks having 78.000 Cum 4245.09

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

8 Filling in foundation and plinth with murrum or selected soil in 94.500 Cum 294.38

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

9 Filling in plinth with sand under floors including watering 54.000 Cum 481.80

ramming, consolidating and dressing complete

10 Carring out plinth treatment to post construction / existing 200.000 Sqm 124.35

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

11 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 28.750 Cum 3757.61

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth

12 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 9.000 Cum 8022.71

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Columns for all floor level.

13 Brick work using common burnt clay building bricks having 146.500 Cum 4526.81

crushing strength not less than 35 kg/Sq.Cm. in superstructure

above plinth level upto floor two level in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional brick etc. complete

14 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 21.250 Cum 3270.55

coarse sand : 6- B.T. machine crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of formwork

in (A) Foundation and Plinth

15 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 9.750 Cum 7191.41

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Lintels for all floor level.

16 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 25.750 Cum 6338.77

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Beams for all floor level.

17 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 32.500 Cum 6636.92

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Slab for all floor level.

18 Providing TMT Bar FE 500D reinforcement for R.C.C. work 13715.000 kg 77.29

including bending, binding and placing in position complete

upto floor two level

19 Providing and fixing both sides polished machine cut kota stone 62.500 Sqm 617.60

shelves / partition of single piece (maximum 150 cm) 25 mm

thick embedded into wall with groove in cement mortar 1:2 (1

cement : 2 fine sand), including racking and finishing smooth

the surface, including joined with grey cement, rubbing, cutting

the stone as and where required etc. completed.

20 Providing 15mm thick cement plaster in single coat on Rough 953.000 Sqm 254.40

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) including finishing with a

floating coat of neat cement slurry for Ground Floor

21 Providing 10 mm thick cement plaster in single coat on brick / 215.000 Sqm 228.34

concrete on ceilings and sofits of stairs for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) including finishing with a

floating coat of neat cement slurry Ground Floor

22 Providing 20mm thick cement plaster in single coat on single or 1062.500 Sqm 281.12

half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:4 (1-cement:4-

sand) including finishing with a floating coat of neat cement

slurry for Ground Floor

23 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 326.500 Sqm 1311.18

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

24 Providing and laying Ceramic tiles 6mm thick in skrting risers 135.000 Sqm 1030.57

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement

: 3-coarse sand) and jointed with white cement slurry

25 Providing and laying Ceramic tiles 6mm thick in flooring treads 9.000 Sqm 997.16

of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in

26 Providing and fixing 18 mm thick mirror polished Granite stone 76.000 Sqm 2202.08

of machine cut & full round edge and polished of approved

quality in cladding on sill and around the Doors / windows /

ventilation with 20 mm thick cement plaster 1:3 and jointed

with white / matching pigment cement slurry & adhesive,

including polishing & moulding of exposed edges etc. complete

for all floor level as directed by Engineer-in-charge.

27 Constructing a Sandwich type cooking platform of 60 cm width 19.000 Sqm 5443.07

and 70 cm height resting with Granite polished stone top and

100 mm height faces in exposed faces with 18 mm thick of

polished Granite stone of approved colour and quality on

mm x 2 No polished Kota stone sandwich supports, polished

kota stone shelves and fixing stone using cement mortar 1:2 (1

cement : 2 fine sand) for sandwich and fitting at bottom & edges

with water proof rigid adhesives, including mocking necessary

grooves in walls, polishing and making edges etc. complete as

directed by Engineer-in-charge. (Only top clear area of platform

shall be measured and paid for)

28 Providing and fixing Stainless steel kitchen sink Glossy ASIS 304 5.000 No 1173.78

grade and 1 mm thick with over all size 510 x 432 x 33 and

bowl size 455 x 368 x 190 mm of approved brand as directed by

Engineer-in-charge with all fittings like C.I. or M.S. brackets

painted white / or fixing on stone base, including cutting holes

and making good the same, 32 mm dia Brass waste and M.I.

fisher union fitting, including all necessary fittings etc. complete.

29 Providing and fixing standared extruded of alluminium section 2.000 Sqm 1175.56

of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/Rmt with

colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for Ventilation

30 Providing and fixing extruded colour anodized aluminium three 39.750 Sqm 3171.70

track sliding window having aluminium section having outer

frame for bottom member of size 92.00 x 31.75 x 1.30 mm size

weight of 1.07 KG / Rmt and outer frame for top and sides

members size 92.00 x 31.75 x 1.50 mm size weight of 1.06 KG /

Rmt, for shutters using top and bottom size 40 x 18 x 1.29 mm

size weight 0.456 KG / Rmt & interlock member size 40 x 18 x

1.29 mm size weight 0.456 KG / Rmt & handle member size

x 18 x 1.29 mm size weight 0.456 KG / Rmt with 5 mm thick

transparent bronze colour tinted float glass for shutter and

fixing wire net shutter of Stainless Steel wire of 304-grade of IS

Gauge designation 85-G with wire of 0-56 mm diameter as a

third sliding shutter with necessary fixtures and fastening like

rubber gasket and transparent silicon sealant glass fixing to

frame etc. complete as per drawing and instruction of Engineer-

31 Providing and fixing 35 mm thick shutter for door having 30.500 Sqm 4116.87

factory made solid core, melamine faced, three layered resin

flushed door of approved brand and manufacture, with 1 mm

thick decorative laminated sheet on both side with 6 mm thick

and 35 mm x 35 mm specially shaped moulded teak wood

beading fixed around the door with necessary fixtures and

fastenings like S.S. butt hinges, S.S. Aldrop, S.S. Handle size

cm long, stopper, door closers arrow type etc. complete as per

detail colour & pattern approved by Engineer-in-charge.

32 Providing and fixing M.S. plain Grills (Safety Grill) / Shutter of 3823.000 Kg 106.58

required pattern to wooden frames of window / Door etc. with

M.S. flats at required spacing and frame all-round square or

round bars with round handed bolts and nuts or by screws,

including primer coat of approved quality and two coats of oil

painting etc. complete.

33 Applying two coats of putty & two coats of primer of approved 695.000 Sqm 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

34 Wall painting (two coats) with plastic emulsion paint of 695.000 Sqm 82.85

approved brand and manufacture on undecorated wall surface

to give an even shade including thoroughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

35 Wall painting (two coats) with plastic emulsion paint of 215.000 Sqm 88.38

approved brand and manufacture on ceiling and sloping roofs

to give an even shade including thoroughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

36 Finishing wall with weather proof exterior emulsion paint on 1320.500 Sqm 120.26

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials etc. complete

37 Providing and laying water proofing treatment on terrace with 230.500 Sqm 1043.10

broken China mosaic tiles flooring over average 40 mm C.C.

1:2:4 bedding for maintaining slope for plain and curve surface

& 12 mm to 20 mm of broken piece of ceramic / glazed tiles

(one for more colour as directed) to be laid over cement mortar

bedding of C. M. 1:3 (1 cement : 3 sand) contain one KG of water

proofing materials per bag of OPC at plain or / and slops and to

be tempered to bring mortar ceramic up to surface with using

white cement and colour pigment, including rounding of

junctions and extending them up to 15 cm along the wall and

curing with bends any patterns or design as per drawing and

cleaning by using oxalic acid etc. complete.

38 Providing and fixing water closet squatting pan (Indian type 5.000 No 1458.05

W.C. pan) size 580 mm (Including 'P' or 'S' trap, foot rests and

excluding earthwork, bed concrete) Including providing and

fixing 100 mm size “P” or “S” trap for water closet squatting pan

including jointing the trap with the pan and soil in cement

mortar 1:1 (1 cement : 1 coarse sand) including P & F in cement

mortar 1:3 (1 cement : 3 coarse sand) A pair of white vitreous

china 250 mm x 130 mm x 30 mm foot rest for long pattern

squatting pan water closet, including P & F G.I. inlet connection

for flush pipe with W.C. pan (A) Vitreous china - (i) Long

pattern-white colour.

39 Providing and fixing Wash basin with single hole for pillar tape 5.000 No 2187.86

with C.I. or M.S. brackets painted white including cutting holes

and making good the same but excluding fittings. (A) vitreous

china : (ii) Flat back wash basin 550 mm x 400 mm size, (i) in

white colour, including fixing 32 mm dia C.P. Brass waste pipe,

32 mm dia M. I. Fisher union, 15 mm dia stop tap and 15 mm

dia capstan head pillar tap, screw down high pressure with

screws shanks and back nuts & inlet & outlet connections for

wash basin etc. complete.

40 Providing erecting and fixing double coated ISI water tank of 5000.000 Litre 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace

41 Providing and fixing screw down bib taps of following size.(B) 15.000 No 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

42 Providing and fixing concealed Cock of premium make with 5.000 No 808.00

necessary other materials and piping connections etc. complete

as directed by Engineer-in-charge.

43 Providing and fixing Angle Cock of premium make with 10.000 No 606.00

necessary other materials and piping connections etc. complete

as directed by Engineer-in-charge.

44 Providing and fixing C.P. brass towel rail complete with C.P. 5.000 No 616.42

brass brackets fixed to wooden plugs with C.P. brass screws.(B)

600mm x 20mm size.

45 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 5.000 No 586.27

100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

46 Providing and fixing 600mm x 450mm bevelled edge mirror of 5.000 No 859.41

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden plug with C.P. brass screws and

47 Constructing brick masonry chamber for underground C.I. 5.000 No 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe

line with one or two inlets.

48 Providing and fixing S.W. gully trap with C.I. grating brick 10.000 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R type

49 Providing and Fixing PVC Spigot and Socket Soil waste and 75.000 Rmt 280.23

Ventilating Pipe of the following nominal size 75 mm dia.

50 Providing and Fixing P.V.C. Spigot and Socket Soil waste and 50.000 Rmt 339.05

Ventilating Pipe of the following nominal size 110 mm dia.

51 Providing and fixing M.S. fan clamps type 1 of 16 mm. dia M.S. 20.000 No 132.29

bar bent to shape with hooked ends to R.C.C. slabs during laying

including painting the exposed portion of the loops all as per

standard design complete.

52 Providing laying and jointing in true line and level 15mm dia. 150.000 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

53 Providing laying and jointing in true line and level 25mm dia. 100.000 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

54 Providing Sock well of inside Dimension 3.00 mt. Deep & 2.00 5.000 No 43449.66

mt. Dia. Incl. Excavation, honey comb masonary work in C.M.

1:6 incl. Covering the top with slab and providing mainhole

cover incl. Providing vatas and curing etc. complete..

55 Constg Septic tank Including Excavation,B.B.C.C. 1:5:10, with 5.000 No 24160.60

brick masonarry wall in C;M 1:6 finished with Cement plaster

in C;M; 1:3 incl. partition with half brick masonary.Etc

56 Bala concept drawings on walls as per the instruction of 5.000 No 15150.00

Engineer in charge

57 Providing and fixing pre-cast Rubber Dye / steel Dye inter 73.500 Sqm 706.93

locking concrete block 60mm thick with grade of concrete M-

300 pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

58 Supplying and fixing slide, seesaw and swing combo set as per 5.000 Job 37875.00

the instruction of Engineer in charge.

59 Providing and Fixing SS 304 Foldable Checking bed having size 5.000 No 6060.00

1.50 X 0.60 X 0.75 mm including using of 25mm dia pipe, SS

2mm thick, matter of 25.4 (1") of 40 density, cover with regine

cloth of approved quality etc completed as directed by Engineer

60 Providing and Placing IT wood writing table having size 1.50 X 5.000 No 15150.00

0.75 X 0.75 mt with one side drawer with using of 19mm thick

WP wood, top cover with 1 mm thick wood type Formica

including using of all necessary material & labour etc completed

as directed by Engineer incharge

61 Providing and fixing Fabric cloth Curtain having length 1.8 mtr 50.000 Mtr. 858.50

for covering of checking area including using of alluminum

sliding channel etc complete as directed by Engineer incharge.

62 Providing and Fixing of SS 304 Hanger for bag including using 100.000 No 252.50

all necessary materials like SS rail, screw etc completed as

directed by Engineer Incharge.

63 Providing and Fixing pin cushion display board having size 1.20 5.000 No 606.00

X 0.75 mt including using of alluminum section frame, 18mm

thick WB plywood, nevy blue Cushion cloth pin etc completed

as directed by Engineer Incharge.

64 Providing and fixing PVC modular kitchen cabinet consisting of 12.500 Sqm 7575.00

base and wall units, made from high quality rigid PVC boards

(minimum 15–18 mm thick), including shutters, shelves,

drawers, SS hinges, telescopic channels, handles, magnetic

locks, necessary fittings, cutting, fixing, complete as per design

and direction of Engineer-in-charge.

65 Providing and fixing foldable MS ladder having 0.90mt wide & 250.000 Kg 110.77

3.60mt long including rod hinge arrangment at middle with

ladder including one coat of red oxide & two coats of oil paint

etc completed as directed by Engineer incharge.

66 Providing and fixing of hook of 10mm or 12mm dia including 5.000 No 303.00

drilling hole, fixing of male- female thrade fastner sealing the

same with appoxy compound, finishing the same etc complete

as directed by Engineer incharge.

67 Providing and fixing medical device & equipment standio meter 5.000 No 1414.00

height measuring scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete as directed by

Engineer incharge.

68 Providing and supplying standard PVC (Polyvinyl chloride) 10.000 No 1010.00

Chair with handle of approved design and make as directed by

Engineer incharge.

69 Providing and supplying standard PVC (Polyvinyl chloride) 10.000 No 606.00

Stool having size 3.75 X 0.60 X 0.45mtr of approved make as

directed by Engineer incharge.

70 Providing & fixing ABC type fire extinguisher 4 kg ISI marked 5.000 No 1515.00

71 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 50.000 Point. 299.97

Sq.mm & earth wire of 1.5 Sq.mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in /

flushed on wall /ceiling, complete with 6A Tissino Type ISI

marked flush type switch / bell push and accessories erected on

Metal / PVC Box covered with 3 mm thick PC (Polycarbonate) /

Acrylic sheet with necessary Lamp holder / ceiling rose / H.D.

Connector as directed. (c) with oval conduit /pvc casing

capping double lock type

72 Point wiring for independent PLUG with following size mains 30.000 Point. 336.33

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /flushed on

wall/ceiling , complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection

erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet. (h) with oval conduit /pvc

casing capping double lock type

73 Mains with ISI marked electrolyte stranded copper conductor, 250.000 Mtr. 66.66

Non PVC Zero Halogen free fire retardant insulated copper

conductor, insulated wire (HFFR) conforms to IS-694, erected

in existing pipe with 1.5sq. mm copper conductor of same

specifications for earth continuity of following size. [i] 3 wire

74 Supplying & erecting earth pit of minimum bore dia.150mm 5.000 No's 4591.46

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications. (a) For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of

75 Providing & Erecting following Shockproof tissino type 10.000 No's 31.31

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (1) One no Single

pole 6 A Switch / Bell push

76 Providing & Erecting following Shockproof tissino type 10.000 No's 47.47

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (3) One no Single

pole 16 A Switch

77 Providing & Erecting following Shockproof tissino type 10.000 No's 219.17

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (14) Electronic Hum

free EME Socket Type Steps Fan Regulator

78 Providing & erecting Switch board for Computer or electric 10.000 No's 332.29

apparatus consisting of following items in single board erected

on PVC / Metal board with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed 1 no. 6A/16A universal plug-

switch combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug

79 Providing & erecting 240 V MCB double pole switch for motor & 5.000 No's 330.27

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat.III

80 Providing and erecting Sheet Steel powder coated MCB 5.000 No's 702.96

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and

BS 5486-1986 without MCB to house appropriate nos. of MCBs.

(The DBs should be used of same company of MCB to be used)

(A,a,iii)) Single phase 8 way single door

81 Supplying & erecting 5 stage single reverse osmosis water 5.000 No's 15620.66

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi

inline type post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity & erected as

directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

82 Supplying and erecting LED indoor fittings with LEDs of 15.000 No's 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

ranges shown.)(A) Tube Light with integral driver (v) 36-40

Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll

83 Supplying and erecting led lamps with following wattage 20.000 No's 404.00

capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (v) 21 to 30 watts Cat III

84 Providing and erecting Approved make Ceiling fan with double 15.000 No's 1596.81

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

mm. sweep complete, canopy erected on existing hook or clamp

with earthing. [Make shall be approved by Engineer in charge]

85 Approved make ELCBs / RCCBs conforming to IS: 12640 and 5.000 No's 2636.10

having sensitivity of 30 mA and Short Circuit withstand

capacity of 6 KA and suitable for operation on single phase

V. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii)

40Amps. DP Cat-II

86 Providing & erecting open well type horizontal mono block 5.000 No's 7934.56

pump set with stainless steel body having following

specification (A) 0.5 H.P. single phase open well motor pump

set having discharge of 115 LPM @ 15 mtr. head suitable for

mm dia. delivery pipe with control panel Cat. II

87 Supplying & Erecting floor mounted/ table top single phase 5.000 No's 11557.43

50Hz water dispenser with SS 304 food grade cold tank

specification having three water tap of hot/cold/ambient water

function, LED display with storage capacity from 2.5 Ltrs to

Ltrs, cooling capacity 2.5ltrs/hr, including refrigerant with

20ltrs refrigerant storage capacity compartment inclusive

1No.water topping bottle

88 Supplying & Erecting of LED / QLED Full HD Smart Google TV 5.000 No's 15139.90

with 100% Color Volume Plus | 24W Dolby Audio including

having Google Assitant & other futures with necessary

connetion etc complete.

I / We am / are willing to carry out the work at ________________________________ % above / below percent (should

be written in figure and words) of the estimated mentioned above. Amount of my / our tender works out as under

Estimated amount put to Estimated amount put to

Deduct ________ % below Rs. ____________ Add _______ % above Rs.___________

(* Please strike out whichever is not applicable)

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for work

under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 / 61 / C,

Dt. 03/05/2008 attached with tender papers.

7. The contractor is totally responsible to bare all applicable taxes i.e. G.S.T. etc. & Department will not entertain any contractor

representation to reimburse any financial burden due to applicable taxes, i.e. G.S.T. etc.

Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division