REPAIR/ REPLACEMENT OF STREET LIGHT AND CONNECTED WORKS AT ORA, AMBC ,TRG AREA,SQNS AND ETTIKULAM AREA UNDER GE(MAINT) EZHIMALA

Amount

Taking down the unserviceable LT UG cable of size of 6Sqmm to16 sqmm 4 core including removing electrical connection and keeping side serviceable cable include removing cable protection cover etc all as specified.

Exacavation in trenches not exceeding 1.5 mtr in width and depth and getting out in hard and dense soil all as specified and as directed.Note: The excavation has to be done manually only

Returing and filling in including levelling watering and well ramming into layers not exceeding 25 cm in hard/dense soil

Removal of excavated soil to a distance not exceeding 50 mtrs and depositing at a level not exceeding 1.5 mtr from starting point.

Supply and spreading river sand for cushioning and covering of the UG cable in trenches all as specified and directed.

Supply and lay PCC un reinforced cable cover of size 250 mmx150mmx40mm , class LV type I flat for cable protection complete all as specified and directed.

Relaying of PCC un reinforced LTcable cover of size 250 mmx150mmx40mm item obtained from ser no 1 complete all as specified and directed by Engr in charge.

Relaying cable XLPE insulated heavy duty galvanised steel strip armoured LT 1100 volt grade with aluminium conductors multistranded confirming to IS laid in trenches/pipes/wall size up to 16 sqmm 4 core.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated heavy duly galvanised steel strip armoured LT1100 volt grade with aluminium conductors of size 16 sqmm4 core complete all as specified and directed Make:- Havells, RPG, Polycab.

All as per item no. 9 above but size of 10 sqmm 4.0core complete all as specified and directed Make:- Havells, RPG, Polycab.

Material and labour for mass filling in foundation/coping/wall with PCC 1:3:6 using 20 mm graded aggregate type C1 as site requirement complete all as specified and directed by Engr in charge

Material and labour for dismantling/removal of existing pole of Post top lantern of any type from it's position/foundation after necessary exavation and earth work and refixing on site all as specified and directed.

Cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard using pre mix bituminous as required at site to match with the existing surface all as specified. NOTE: Before using the hand drilling/ breaker machine diamond cutter will be used all as directed by Engr-in-charge.

Supply and fix High density poly Ethylene pipes(HDPE) of pressure rating 6kgf/ cm2 laid in trenches of size 50mm dia.

All as per item no. 14 above but of size 40mm nominal dia

Supply and fix in replacement of Copper cable flexible 2.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge. Make : Polycab/Havells/Finolex.

Supply and fix in replacement of digital time switch day programme three pole Make Indo asian or equivalent in L&T/Havells/C&S.

Supply and fix in replacement of contactor four pole 415 volt 63 Amp complete all as specified and directed by Engr in charge. Make L&T/Schnieder/Havells

Supply and fix in replacement of post top,energy saving,enviormental friendly , spun aluminium landscape luminaire with high power LEDs as light source of 40 watt suitable for pole dia of 50 mm complete all as specified and directed by Engr in charge. Make:- CG Cat part no LPT0 40 CDL or equivalent make in Havells/Bajaj

Supply and fix in replacement bollard light fitting tulip/robust type with soft 360 light 10W with IP 65 proctection Cat part no.LBLTW-10-WW of Make Crompton or Equivalent

Supply and fix in replacement of old unserviceable street light fitting with LED street light fittings Luminaire 60 watts ,240V 50Hz pressure die cast aluminium coating ,heat resistant glass ,IP 66 rating,Nexus+ type . Cat part no LSTP-60- CDL Make: crompton or eqivalent make in Philips/Havells

S&F in replacement die cast aluminium IP 66 120 W LED flood light luminaire. Make Crompton Model No LFLN-120- CDL/60 or equivalent in Philips/Havells

S&F in replacement die cast aluminium IP 66 150 W LED flood light luminaire. Make Crompton Model No LFLN 150 CDL/60 or equivalent in Philips/Havells

S&F in replacement die cast aluminium IP 66 30 W LED flood light luminaire complete all as specified and directed by Engr in charge. Make CG Cat part No LFLN 1130CDL or equivalent in Philips/Havells

Supply and fix in replacement of bracket made out of GI pipe medium grade, 50 mm dia, 90 cm long for fixing street light with and including clamps, nuts, bolts, washer commplete accessoriesand applying two coats of oil painting over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Taking down the defective security light fittings /street light fittings of any type from 11/10/8.5 Mtr Swan neck type pole and refixing in same position after carrying out necessary repair work/replacement of burn out parts and cleaning the fittings completely. spares such as Driver/clamps/wire etc shall be measured and paid under respective item .Minor items other than 'supply only' items mentiond below shall be deemed to be included in the quoted rate.

Supply only LED driver 45 Watt cat part No BGD700655Y, Driver code- 112520. Make Bajaj/Havells/Wipro/Crompton all as specified and directed.

Supply only LED driver 60 Watt cat part No BGD381505Y, Driver code- 112552. Make Bajaj/Havells/Wipro/Crompton all as specified and directed.

Sreekrupa Enterprises

G P ENGINEERS

ROTECH ENGINEERS AND BUILDERS

General Engineering and Constructions

ANAND REFRIGERATION

Gates Infra Construction Co