SPECIAL REPAIRS TO TOILETS INSIDE THE DEPOT AT MOK REPLACEMENT OF GODOWN ROOF OF GP I AND III WITH GALVALUME SHEET AT CSD DEPOT AND PROVN OF HARDSTANDING AND EXTENSION OF CHAJJA AT BUILDING P 15 124KB AT KATARIBAGH

Amount

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets any gauge thickness incl roof/Wall covering complete all as specified and directed

Dismantling single layer Mangalore pattern roofing tiles or similar tiles covering complete all as specified and directed

Dismantling of wooden scantling work of any description not otherwise provided for covering complete all as specified and directed

Dismantling structural steel work including door, gate but excluding framed truss complete all as specified and directed

M&L for clean swan second class hard wood timber fixed in scantling covering complete all as specified and directed

M&L preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer covering complete all as specified and directed

S&F Fe-410W (Gde-E-250) quality- B, Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates covering complete all as specified and directed

All as per Item No 6 here-in-before but in wind tie and like work complete all as specified and directed.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with coach screw and washer in roof wall and complete all as specified and directed.

M&L for preparation of new steel surface and painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolition of concrete in ground floors and pavings n exc 15 cm thick (below of above ground level) complete all as specified and directed

Dismantling floor/hearth and wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 for lying floor finishes complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed of C:M1:6 complete all as specified and directed

M&L for glazed coloured ceramic tiles in vertical surfaces 300 x 450 x 7 mm thick set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over 10 mm thick rendering CM 1:4 complete all as specified and directed.

M&L for complete removal of existing treatment of plastered old decorated surfaces and applying two coats of white wash on surfaces of walls complete all as specified

M&L complete removal of existing treatment on external wall and applying two coats of antifungal paint (weather coat) over a coat of primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and directed

M&L Rendering 8mm thick in Cement Mortar 1:4 (Externally) on Brick Walls or on Concrete Surfaces, mixing with WPC as per manufacturer's instructions, plastered surfaces over a coat of 12 mm thick in CM 1:6 finished Even and Smooth without using extra Cement, complete all as specified and as directed.

M&L for preparation new plastered External surfaces of wall and applying two coats of weather proof paint (antifungal, Asian Ultima Protek or Equivalent) over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Supply only water proofing compound, conforming to IS and as approved, complete all as specified and directed

M&L for preparing new plastered wall surfaces and applying three coats of white wash on wall surface complete all as specified and directed

Demolition of brick work built in cement mortar, including all quine, arches, pillar etc. complete all as specified and directed

M&L precast cement concrete block masonry with solid blocks Type C1 1:3:6 20mm graded stone aggregate , exc 10 cm width and set in cm 1:6 complete all as specified and directed

M&L for brick work as in half brick thick walls with sub class ‘B’ bricks straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified & directed.

Taking down door/windows with chowkats with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each including cutting holes complete all as specified and directed .

Taking down door/windows with chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4 sqm complete all as specified and directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour solid moulded ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L 150 mm long aluminium handle cast type anodized complete all as specified and directed

M&L 100 mm size, butt hinges stainless steel complete all as specified and directed

M&L Aluminium alloy, anodised, sliding door bolt 200mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

M & L 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed

S&F 15mm dia fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair 15mm dia fancy type chromium plated angle Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

All as per item No: 39 here-in-before but 20 mm bore complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia SS pipe with 1.5 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S& F for fixed in repair vitreous China urinals, bowl type size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed

S&F fixed in repair Vitreous China wash basin, white, flat back, size 630x450mm including 15 mm bore CP Pillar cock with capstan head screwed high pressure with or W/O lettered hot or cold with long screwed shank and fly nuts and PVC connections 15mm size with PTMT nuts of length 600 mm, waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste coupling complete all as specified and directed

S&F fixed in repair vitreous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC10 litre valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC (SWR) P trap 110 mm plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings fixed on walls complete all as specified and directed

S&F PVC (SWR) bends 110 mm dia single socketed in any length , with rubber rings complete all as specified and directed

S&F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.

S&F Aluminium anodised tubular towel rail 20mm dia D type, 60cm long between flanges complete all as specified and directed

S&F in repairs soap dish , chromium plated, approximate size 160x 160x90mm complete all as specified and directed

S&F 15 to 18mm thick granite slab with moulded edge as in partition for urinal of size 310x700mm all as specified complete all as specified and directed

Demolition by breaking up drain pipes (salt glazed stone ware/AC/ RCC) 100 mm dia jointed in cement mortar and taking out of trenches complete all as specified and directed

Excavation in trenches not exc 1.5M wide and not exc 1.5M depth for foundation , etc. for shafts , wells , cess pits , man holes , etc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed

M&L for cement 1:3:6 type C2 with (using 40 mm graded stone aggregate) as in concrete bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed

S&F 110 mm bore PVC (SWR) PIipes a single socketed in any length with rubber ring joints laid in trenches complete as specified and as directed by the Engineer-in-Charge

Returning, filling including spreading levelling watering and well ramming in layers not exc 25 cm thick(soft/loose soil) complete all as specified and directed

Removal of excavated soil to a distance not exc 50M and deposited at a level not exc 1.5M above the starting point complete all as specified and directed

M&L for HDPE septic tank 5000 ltrs capacity incl PVC 100 mm dia vent pipe, earthwork excavation in soft/ loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 type C2 and all other accessories required such as PVC vent cowl etc and incl brick work etc making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete all as specified and directed

S&F in repairs powder coated aluminium frame for doors, windows, ventilators, partitions, cubicles etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick complete all as specified and directed

M&L 4mm thick sheet glass type ordinary quality and glazing with aluminium beading n exc 0.5 sqm etc complete all as specified and directed

S&F repairs aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handles etc. complete all as specified and directed

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments including screed bed or bedding layer 1:4 cement motor 20mm thick for laying floor finishes complete all as specified and directed

M&L of plain cement concrete 75mm thick 1:4:8 type D -2 (using 40 mm graded stone aggregate) complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F of grating 100 mm dia of PTMT minimum weight 25 gms complete all as specified and directed

S&F 32mm dia PTMT wash hand basin /urinal down pipes and waste coupling of PTMT half/ full threaded minimum weight of 32 mm 45 gms complete all as specified and directed

Excavation in post holes (or similar holes) each n.exe 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed

M & L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to fee -410W (gde E-250) quality A complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified.

Surface dressing n.exc 15 cm deep in soft/lose soil complete all as specified and directed

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and size grade M35 conforming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed.

M&L for PCC type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in mass concrete around the Machine pressed precast concrete paver block or chamfered on edges all as specified and as directed by Engr-in-Charge.

WELTRONENGINEERINGSERVICES