Construction of New Food & Drug Laboratory at Surat. Dist Surat.

Name of Work :- Construction of New Food & Drug Laboratory at Surat. Dist Surat.

Memorandum showing items of works to be carried out

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to

Eighty Six Thousand Five Hundred Fifty Five

1 0.25 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(A) By manual means in area of light jungle 86555.97 Hecter

And Paise Ninety Seven Only.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the One Hundred Fifty Seven And Paise Sixteen

excavated stuff any lead and lift.(B) Dense or Hard soil Only.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing

3 2515.00 170.50 One Hundred Seventy And Paise Fifty Only. CMT

off the excavated stuffany lead and lift.(B) Dense or Hard soil

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and disposing One Hundred Eighty Four And Paise Seventy

off the excavated stuffany lead and lift.(B) Dense or Hard soil Seven Only.

Extra for additional depth more than 5.0 m for excavation for foundation including sorting out and stacking of useful Two Hundred Twenty Nine And Paise

materials and disposing off the excavated any lead and lift.(B) Dense or Hard soil Thirteen Only.

Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm. in

One Hundred Thirty Six And Paise Ninety

6 1759.00 depth consolidation Each deposited layer by ramming and watering. 136.92 CMT

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

7 3694.00 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % 87.03 Eighty Seven And Paise Three Only. SMT

concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and Three Hundred One And Paise Seventy Eight

consolidating etc. complete. (upto 10 ton) Only.

Applying general insecticide pest control treatment to floors, cupboards etc. including labour, material etc. complete. Using

Hepta chloride 20 EC. As per 6113 pests consentration weight 0.50 % is reccomended one litre chemical emulsion dillute with

9 213.00 53.45 Fifty Three And Paise Forty Five Only. SMT

39 litre of water will give. Total dillute concetration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre

chemical / Sqm of surface is recommended as per I.S.22006

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and between One Thousand Ninety Four And Paise Eleven

returns as directed for Foundation base. Only.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and Three Thousand Seven Hundred Forty One

curing complete including cost of formwork in (A) Foundation and Plinth And Paise Sixty Nine Only.

Providing and laying in position Ready Mixed M-350 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering Six Thousand Forty Six And Paise Eighty

shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as Seven Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 425 kg ) (A)

Filling in foundation with plumb concrete of cement sand and metal (up to 5 cm size) in proportion 1:3:6 including centering, Four Thousand Six Hundred Ninety Nine And

shuttering, temping, smooth finishing curing for all leads and lift. Paise Seventy Three Only.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering Eight Thousand Three Hundred Fifty And

shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as Paise Sixty Eight Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (B)

Column (i) For All Floor (2B+G+7th Floor)

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering Seven Thousand Fourteen And Paise Forty

shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as Five Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (C)

Beam (i) For All Floor (2B+G+7th Floor)

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering

Six Thousand Seven Hundred Thirty Eight

16 206.00 shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as 6738.72 CMT

And Paise Seventy Two Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (D)

Lintel, sill and Mullians Bands (i) For All Floor (2B+G+7th Floor)

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering

Six Thousand Eight Hundred Sixty Two And

17 142.00 shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as 6862.95 CMT

Paise Ninety Five Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (E)

Weathershed (i) For All Floor (2B+G+7th Floor)

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering Eight Thousand Two Hundred Twenty Six

shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as And Paise Forty Five Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (F)

Slab (i) For All Floor (2B+G+7th Floor)

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering Six Thousand Two Hundred Fifty Two And

shuttering finishing but Excluding the cost reinforcement and including cost of admixtures in recommended proportions as Paise Ninety One Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (G)

Staircase (i) For All Floor (2B+G+7th Floor)

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer with all lead having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit mixer to site of laying, Including the cost of centering Seven Thousand Four Hundred Ninety Two

shuttering finishing but Excluding the cost reinforcement andincluding cost of admixtures in recommended proportions as And Paise Eighteen Only.

per GERI Lab / IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per Letest Gov GR 410 KG ) (H)

RCC Wall (i) For All Floor (2B+G+7th Floor)

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Constructing cast-in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting, ready

mix reinforced cement concrete, tramie controlled, of M 30 grade using minimum 400 kg cement per cum of concrete

including providing and mixing required admixtures in recommended proportions as per IS : 9103, as approved by the

Engineer-in-charge, for achieving 150 - 200 mm slump, for diaphragm wall having thickness as per approved structural design

not exceeding 600 mm, in pannels of required depth and lengths as per approved drawing, including constructing necessary

guide walls as required and as specified including boring in all kinds of soils and rocks, including working in or under water

and / or liquid mud, in foul conditions and pumping or bailing out of water and removing slush, including disposal of earth/

rock / slush etc. for all leads and all lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and

when required for all depths, including agitating bentonite slurry during trenching etc., providing and fixing stop ends or form

21 1890.00 tubes, upto the required depth of diaphragm wall including extracting the same after casting, including chipping off the 15150.00 Fifteen Thousand One Hundred Fifty Only. CMT

bentonite / Driling Polymer adulterated concrete or unsound concrete up to the cut off level for obtaining the sound

concrete, dressing undulations on the exposed face of diaphragm wall after excavation by chipping / chiseling etc. including

filling the depression/ cavities with sound concrete etc. complete and as directed by the Engineer-in-charge, including

providing recess for bearing plates and fixing insert boxes for inclined rock anchors, Ground anchors (tieback anchors) into the

soil/rock behind the diaphragm wall, Internal steel struts spanning across the excavation, Top-down construction, where the

basement slabs act as permanent supports. etc. including cost of anchors and inserts but excluding the cost of

reinforcement.complete as per the specifications and approved design and as directed by the Engineer-in-charge

Providing and laying controlled cement concrete M250 for trimix RCC Excluding the cost of reinforcement & including of using

125 micron polythine sheet at base of concrete using approved quality of polyester fiber (12mm) during mixing of cement

concrete @ 125 gm per bag) and or as per manufacturing ,s specification of cement concerte @ 125 gm per bag) and or as per

manufacater's specification including preparing the sub base with form work of M.S Chhanel of requiared size to maintain

level and slope of concrete with using surface vibrator ,finishing the surface with power floter and trove ,light brooming on

the surface with providing construction joints of size 10 mm wide 25mm deep in transverse direction @ 4.5 m C/C with

sealing the same with approved quality bitumen sealent and providing expansion joints of size 25 mm width and up to Four Thousand Seven Hundred Ninety Seven

throught depth of concete using 25 mm thick dura board HD -100 of approved quality and sealing the same with approved And Paise Fifty Only.

quality bitumen sealent at 40 meter C/c and or as directed using concrete cutter machine with necessary equipments ,labours

tools tackles, including cost of admixtures in recommended proportions as per GERI Lab / IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per Letest Gov GR 380 KG ) for RCC Trimix for Basement etc complete as

directed by EIC.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete For All

23 1387202.31 77.29 Seventy Seven And Paise Twenty Nine Only. Kg.

Floor (2B+G+7th Floor)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and Four Thousand Four Hundred Seventy One

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(C) Fly Ash Bricks Upto Plinth And Paise Eighty Seven Only.

Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super

Five Thousand One Hundred Forty Two And

25 2346.19 structure above plinth level upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical 5142.22 CMT

Paise Twenty Two Only.

Specification For All Floor (2B+G+7th Floor)

Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of stairs and finished even and Two Hundred Forty Five And Paise

smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For All Floor (2B+G+7th Floor) Seventeen Only.

Providing 15 mm thick mala cement plaster on interior block/brick /concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 5 mm thick top coat of cement Three Hundred Eighty Four And Paise Thirty

mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing with 1x1mm Grooves at junction of One Only.

Structural members etc. complete. For All Floor (2B+G+7th Floor)

20mm thick Mala cement plaster / sand faced cement plaster on walls above ground level consisting of 12mm thick backing

Four Hundred Forty Six And Paise Forty Two

28 6053.68 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1 sand) etc. complete. For All Floor 446.42 SMT

(2B+G+7th Floor)

Providing throating or plaster drip and moulding to R.C.C. Chhajja for All Floor

29 661.00 43.74 Forty Three And Paise Seventy Four Only. RMT

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering

30 405.00 24.28 Twenty Four And Paise Twenty Eight Only. RMT

etc. complete for all floor

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing Brick Bat Water Proofing treatment to floor and walls of water tank, w.c. & bath area, through approved agencies

preparing floor and wall for water proofing work/ by chasing/cutting as per the companies requirement. Providing a layer of

plaster with waterproofing compound/ admixture about 25 mm thick in the floor / depression and about 1`8 mm on the

sidewalls / depression upto the floor level. The waterproof plaster about 18 mm thick to be continued on the walls above the

31 408.00 808.00 Eight Hundred Eight Only. SMT

floor level for a height of 600 mm with surface suitable to receive further finishing treatment all complete as per companies

specifications and instructions and as directed for all heights and floors. The round vata shall be included in this in SMT and

shall be taken upto top of round on wall etc complete as directed by EIC at For All Floor (2B+G+7th Floor)

Providing and laying brick bat coba using well-burnt brick bats of approved quality, laid to the required slope in cement

mortar 1:5 (1 cement : 5 coarse sand), including filling the joints with cement mortar, compacting, finishing the surface, and

curing complete. Thereafter, providing and laying broken China mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles laid over cement mortar 1:3 (1 cement : 3 coarse sand) to the required slope, thoroughly tamped to One Thousand One Hundred Fifty Three And

bring the mortar cream to the surface, using white cement for grouting the joints, including rubbing, polishing, cleaning with Paise Eighty Four Only.

water and oxalic acid, rounding off junctions, extending the mosaic finish up to 150 mm along the adjoining walls to form the

skirting/coving, and finishing complete in all respects, as directed by the Architect/Engineer-in-Charge.For All Floor (2B+G+7th

Providing And filling with good quality sinder(steam coal) as directed by engineer in charge in sunks in layers of 15 cm Four Hundred Fifty Two And Paise Forty

thick,including watering,placing ,ramming well etc as directed, For All Floor (2B+G+7th Floor) Eight Only.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures

like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels /

subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from

negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-

Four Hundred Seventy Seven And Paise Sixty

34 1603.00 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and 477.63 SMT

resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a

width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge.

The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per

sqm per coat etc complete as directed by EIC at all floor level. (for RCC Wall)

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size applying between the RCC and masonry junction in

proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the Three Hundred Sixty Eight And Paise Sixty

jali with nails, etc complete as directed by the site-in-charge. For All Floor (2B+G+7th Floor) Five Only.

Providing & laying GVT Vitrified tiles flooring & skerting over 20 mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and

One Thousand Seven Hundred Sixty Seven

36 5124.00 jointed with color cement slurry including Making 3mm spacer at joint of tiles and fill the spacer with epoxy jointing material 1767.50 SMT

And Paise Fifty Only.

,finised with flush pointing & cleaning the surface etc complete selection as directed by Architect/E.IC ( Size -1.20Mt. X

P & L 60x120 cm. Matt / Glossy vitrified Tiles flooring 8 & 10mm Thick Tiles flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling

One Thousand Five Hundred Seventy Five

37 1569.00 of existing flooring and jointed 3 MM EPOXY GROOVE with color cement slurry including finised with flush pointing & 1575.60 SMT

And Paise Sixty Only.

cleaning the surface etc. complete and Colour Shade approved by Engineer-In-Charge.

P & L 24" x 24" vitrified 8 mm thick tile flooring ,skerting over 20 mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and One Thousand Ninety Two And Paise Thirty

jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade. Seven Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Epoxy Flooring: (Nitoflor EU5 - 2.5mm + Nitoflor FC150 - 0.5mm )

Preparing the existing surface of floor by diamond wheel grinding and cleaning by wire brushing etc. to remove all dirt, dust

etc to expose clean sound base subsrate.Treating construction and control joints using epoxy resin screed Nitoflor EU5 after

cleaning the grooves and ensuring in dry condition. Moisture content of floor should be less than 5%. then providing and

applying 3 mm thick epoxy self-smoothening flooring on concrete surface having moisture content less than 5 %.Application

of Nitoprime 25-epoxy penetrating primer for concrete surface, using brush or roller, allow to become tacky depending upon

temperature, mixing and application of Nitoflor EU5-High Strength self-smoothening epoxy underlay at 2.5 mm thickness

One Thousand Three Hundred Sixty Three

39 513.00 followed by Application of Nitoflor FC 150 - High build solvent free Epoxy resin flooring in 2 coats for 500 microns DFT using 1363.50 SMT

And Paise Fifty Only.

brush or lambswool roller.The second coat may be applied in perpendicular direction to first coat as soon as it has intially

dried (typically 8-10 hrs,time depending upon ambient temperature)etc.complete as per instruction provided in FOSROC

techncial datasheet.The Epoxy Coating material should comply following properties: Compressive strength (BS 6319-2)-

N/mm2, Flextural Strength (BS6319-2) -40 N/mm2, Tensile Strength (BS 6319-3)- 20 N/mm2, Water Absorption (ASTM C413) -

0.07%, Shore D Hardness (ASTM D2240) > 80, Abrasion Resistance (ASTM D4060) - 0.1 mg/cycle loss of weight (with CS17

wheel of 1000g weight) etc complete as directed by EIC at all floor level.

Vinyl Flooring : Preparing the existing surface of floor by diamond wheel grinding and cleaning by wire brushing etc. to

remove all dirt, dust etc to expose clean sound base subsrate.Treating construction and control joints using epoxy resin

screed Nitoflor EU5 after cleaning the grooves and ensuring in dry condition. Moisture content of floor should be less than

One Thousand Eight Hundred Ninety Three

40 1495.00 5%. then providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of Plyurethane Reinforced Surface, 1893.75 SMT

And Paise Seventy Five Only.

Densely Compacted, Anti-Bactaril and fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2 with

levelling, chemical adhasive for fixing, corner junction.etc complete as directed by EIC at all floor level.

Providing and laying 18 mm to 20 mm thick polished granite stone, machine cut in single piece (maximum available size), in sill

and jambs of door, window and ventilation frames, laid over 10 mm thick cement mortar in proportion 1:3 (1 cement :

coarse sand) with Cement base Adhesives, jointed with grey cement slurry with matching pigment, including rubbing, Three Thousand One Hundred Nine And

polishing, and providing a 3 mm × 3 mm chamfer or Round Edge to all exposed edges, complete in all respects, with colour Paise Seventy Nine Only.

and shade as approved by the Architect/Engineer-in-Charge, at all floor levels.

Providing and laying polished Granite slab 18- 20 mm thick flooring over 20 mm (average) base of cement mortar 1:6 (1

cement : 6 coarse sand) with Cement base Adhesives& risers of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 Two Thousand Seven Hundred Thirty Three

(1 cement : 3 coarse sand) and jointed with gray cement slurry including providing a 3 mm × 3 mm chamfer or half round And Paise Six Only.

moulding, rubbing & polishing etc. complete.at all floor level.

Constructing Sandwitch Platform of 18-20 mm thick Polished Black Granite at top and 25 mm thick Kota stone slab one

side polished at bottom with Cement Mortar 1:3 with Cement base Adhesives including makeing necessary grooves in

walls with Vertical sandwich two Kotastone 25 mm support every 60 cm centre to centre or as required including all labour

material of approved quality incl. full moulded round front edge granite strip of one side polished and jointed with grey Three Thousand Seven Hundred Forty Eight

cement slurry including rubbing and polishing etc. including providing cutting for fixing kitchen/Laoratory sink (as directed) And Paise Eleven Only.

600 mm x 450 mm x 200 mm size stainless steel sink / viterious china sink(as directed by engineer incharge and approved

drawing) at required position etc complete

P/F 18 mm avg. thick double polished(both side) jet black granite slab for urinal partition fix with Cement Mortar 1:3 incl.

Three Thousand Three Hundred Forty Five

44 11.00 providing a 3 mm × 3 mm chamfer or full Round Edge to all exposed edges making groove in wall and fixing properly in line & 3345.12 SMT

And Paise Twelve Only.

level incl. all cost of materials & labours etc. complete at all levels

Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse One Thousand One Hundred Fourteen And

sand) pointing in white cement and jointed with white cement slurry. Paise Three Only.

Providing and fixing 35mm thick both side laminated water proof flush door shutters of archid/anchor/green ply make

including firstclass hardwood and cross band,block board core with plywood face panels,12mm thick batten pattiall around

the shutter,1mm thick. Door skin laminate sheet (Rebeeca/equivalent) on both side including (A) SS finish YAMA/equalent

make fixtures1) Supreme heay butt hinges 150x70x2.5-4nos (2) Tower bolt square 150x10-1no (3) door stopper premium -

46 247.60 1nos (4) Plate type fancy handle 150-2nos . (All nos of fixtures are for one shutter ) S.S finish casted aldrop 30CM Length- 5050.00 Five Thousand Fifty Only. SMT

1nos, Door Stop 1 nos, Vision panel with 3MM plan glass if required Size 0.30 m X 0.60 m Including providing and applying

polish on all sides of door batten patti with Piyu or equivalent make, including edges, etc. complete as per detail drawings and

as directed by E.I.C at all floor level.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

PARTLY GLAZED DOUBLE LEAF DOOR (LAMINATE FINISH):- Providing & Fixing Partly Glazed Double leaf Door, of size as per

deatil drawing (for Each door.) considering block board flush door sheet of 35 mm thickness with plywood face

panels,12mm thick batten pattiall around the shutter covered both side by 9 mm ply & finished with 1 mm thick laminate on

both sides of shutters and having 12 mm clear toughen glass slits as per given pattern & size with crystal edges in both

shutters , fixed with burmaborder Patti at joints , Finishing with all necessary S.S hardwires like DOOR S.S Handles 5PHO

47 92.00 8080.00 Eight Thousand Eighty Only. SMT

2218SS -FPHO 2218 , conceal Door lock Mortize Body 85x60M S.S , DOOR UK key CYLI,60MM 1CK S.S 5 KEY M/HL 125 ROSE SS

,cylinders, stoppers, tower bolt, MS nails, SS-304 screws,miscellaneous hardware items etc. Including providing and applying

polish on all sides of door batten patti with Piyu or equivalent make, including edges As per details given in drawing and as

per instructions of Architect/consultant/Engineer In charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) 35 mm Thick solid decorative type flush

door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of Two Thousand Five Hundred Twenty Five

being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 Only.

microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt

hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-

Providing and fixing Insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire

rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall

be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be

finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a

minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire

door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of

door & its fire rating. The door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated

lab which operates in accordance with ISO/IEC 17025.The Door frame shall be single rebate grooved profile of size minimum

100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitered joint

and field assembeled with bolting system. Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip

Six Thousand Four Hundred Fifty Three And

49 215.00 10X4MM, It shall be fixed in grooves, specifically cut in rebate on all the 3 sides of the frame . The frame should also be 6453.90 SMT

Paise Ninety Only.

provided with fire rated EPDM smoke seal 12X12 mm conforming to IS: 3614:2021 or as per test evidence... All provisions

should be mortised & provided with necessary inbuilt reinforcement to receieve appropriate hardware. Frames should be

provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with

Polyamide sleeves(Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note :- For

grouting of Steel frames in masonary installations ;cement sand mixture 1:3 ratio by civil contractor/fire rated PU foam or

such fire rated material may be recommended except head member

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

FIRE DOOR:Providing and fixing Un-insulated fire rated GI Sheet doors conforming to FD 120 classification of IS 3614 :2021

with fire rating of 120 minutes integrity. The factory manufactured door frame and shutter assembly shall be made out of

minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with

powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs

of salt spray test. All accressesories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer

only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating.

The door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in

accordance with ISO/IEC 17025.The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made

out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembeled

with bolting system. Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip 10X4MM, It shall be fixed in

grooves, specifically cut in rebate on all the 3 sides of the frame . The frame should also be provided with fire rated EPDM Five Thousand Three Hundred Two And

smoke seal 12X12 mm conforming to IS: 3614:2021 or as per test evidence... All provisions should be mortised & provided Paise Fifty Only.

with necessary inbuilt reinforcement to receieve appropriate hardware.Frames should be provided with back plate bracket

for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves(Payable in extra item)

for installation of frame in finished plastered masonary wall opening. Note :- For grouting of Steel frames in masonary

installations ;cement sand mixture 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be

recommended except head member(Payable in extra item). Door leaf should be minimum 46mm thick fully flush double skin

door. Door leaf must be manufactured from 1.2mm(18gauge) thick galvanised steel sheet. The infill material shall be resin

bonded paper honey comb infill. All doors shall be factory prepped for receiving appropriate hardware and provided with

necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm.

For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The

shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 75x3 mm alongwith all suitable

6 MM Thick Clear Fire rated Glass saint gobain make 200x300mm One Thousand Four Hundred Sixty Four And

Paise Fifty Only.

Mortise Shash Lock With SS Lever Handle Of SL7260/ TLH612 Becker F.S. Make (Required For Service Room Loction Such As Two Thousand Two Hundred Eighty Two

AHU, Electrical Rooms Etc.) And Paise Sixty Only.

Mortise Dead Lock with 80mm cylinder body both side key DL7260 Becker F.S. Dead Lock Make. (Required For SERVICES Two Thousand Sixty Five And Paise Forty

Door Location) Five Only.

SS D Type Pull Handle of 300mm mm Long of PHD2230 Becker F.S Make. One Thousand Four Hundred Seventy Four

And Paise Sixty Only.

Door closers of BLC-604 Becker F.S Make. (Required For All Fire Doors Except Shaft Door) One Thousand Three Hundred Sixty Three

And Paise Fifty Only.

SS 304 grade 300mm Long Towe Bolt of Becker FS Make with necessary screws as required.

56 92.00 414.10 Four Hundred Fourteen And Paise Ten Only. Each

57 92.00 Anchor fastners of HILTI of maximum 120mm length. 65.65 Sixty Five And Paise Sixty Five Only. Each

Smoke seal 12x12mm

58 92.00 151.50 One Hundred Fifty One And Paise Fifty Only. RMT

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / RMT, horizontal two track sliding shutters/fixed member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc. including providing 6 mm thick Three Thousand Five Hundred Twenty Four

Sceint gobain heat 70% reflactive glass for glazing fixed with Rubber gasket,Air Lock Strip Silicon Sealant with Standard And Paise Ninety Only.

Extruded Colour Anodized Aluminum Coted fittings & including stainless steel mosqito net jali ,wire of I.S gauge designation

85-G with wire of 0.56 mm fix in aluminium door, window, ventilator shutters of any size, any shape with etc all complete at

all floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. complete for

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @

Wt 1.094Kg / RMT with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with One Thousand Three Hundred One And

colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window Paise Eighty Two Only.

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new

61 30204.00 wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign 40.59 Forty And Paise Fifty Nine Only. SMT

matter and sand papered smooth.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and applying Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on under

62 30204.00 coated wall surface to give and even shade including throughly brushing the surface free from mortor droppings and other 83.36 Eighty Three And Paise Thirty Six Only. SMT

foreign matter and sand paperd smooth on new work to give an even shade.for all floor

Providing and applying of surface cleaning then crack filling with nerolec perma crack filler then 4-6mm dholpur texture two

coats then one coat of nerolec parma damp protect exterior primer on wall surfaces after thoroughly brushing the surface

free from mortar droppings and other foreign matter. Item includes making the surface even and smooth by sand papers.

then after required for the work with weather proof nerolec exterior emulsion paint on wall surface (two coats) to give an Five Hundred Eighty Five And Paise Eighty

required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered Only.

materials. Rates are inclusive of all the material and labourers and scaffolding work, cleaning of the floors etc.& 8 years

warrenty etc complete as directed & suggested by Architect & EIC

Providinfg and fixing Safty grills of required pattern for windows/ Door using necessary M.S angle/ M.S pipe, M.S flats and

other structural steel at required spacing including cutting, welding and fabriction etc. including one coat of primer of One Hundred Nine And Paise Forty One

approved quality and two coats of oil painting as per detail drawing etc complete. Only.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts

Four Thousand One Hundred Fifty And

65 214.00 and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., 4150.09 RMT

Paise Nine Only.

of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with

open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural

analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system

must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the Three Thousand Five Hundred Forty Five

aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, And Paise Sixty One Only.

screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke

seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes,

sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor

fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the

required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible

with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including

double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved

sealant design, within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required

as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by

incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if

required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all

inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and

other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as

described above and as specified.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural

designer, dully approved by Engineer-in-charge. The item also includes the cost of all

mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the

assembled working structural glazing as specified, cleaning and protection till the handing

over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the

performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass

(double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float

glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an

Three Thousand Seven Hundred Fifty Five

67 439.00 inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal and 3755.89 SMT

And Paise Eighty Nine Only.

secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings,

as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.

LOUVERS: Supplying and Installing of Metalium SL-4 type 84R Aluminium 0.65mm TCT Plain Exterior Grade Powder

Two Thousand Three Hundred Seventy Four

68 200.00 Coating of Panels and Back side Framming G.S. Black Exterior Louvre System. etc. complete as directed by Engineer-in- 2374.51 SMT

And Paise Fifty One Only.

HPL SHEET: Providing & fixing High Pressure Laminate sheet 6MM thickness including necessary scafolding ,hardware etc

69 188.00 6565.00 Six Thousand Five Hundred Sixty Five Only. SMT

complete as per approved specification & as direction by E.I.C for all floor

AUTOMATIC SILIDING DOOR : Supply and Installation of Automatic Sliding door, sliding panels of 12mm plain toughnened

glass enclosed within ST-Flex frame profiles with accessories, Operator shall be ES 200 easy, 4150mm Microprocessor

controlled, Self learning and self monitoring, modular operator design, Produced according to the guidelines for power-

operated windows, doors and gates BGR 232, the UVV and the VDE regulations. TÜV design tested, Adjustable closing & Thirty Five Thousand Three Hundred Fifty

opening speed, adjustable hold-open time, Auto Error Display, with Error Code Display for error correction Connection: 230 V, Only.

50/60 Hz, UPS Supply. Clear opening size 3.0 mt and hight 2.40mt . The above work complete in all respect as per approved

drawings and to the satisfaction of engineer-in-charge / architect consultant.

Supply of Wall Paneling : 1. The material of the wall elements should be at-least 1 mm thick Stainless Steel 304 Grade sheet

which should be electrically conductive and finished with 60-80-micron Anti-bacterial powder coating. The surface finish

should be powder coated with anti-bacterial powder coating. The 1 mm thick Stainless Steel 304 Grade sheet panels should

have 12-15 mm thick soaked plaster board / PPGI Sheet 0.5mm on back side and flanged on all four edges. The standard

height for operating theatre shall be approx. 3000mm. 2. Lower wall element (approx. 900mm high). 3. Upper wall element

Ten Thousand Eight Hundred Fifty Four And

71 1828.00 (approx. 1800mm high). 4. A customizable installation module of 200 mm between the lower and upper wall element. 5. 10854.41 SMT

Paise Forty One Only.

Vertical gap between the wall panels should be 10 mm maximum and should be filled with removable extruded silicon

sealant Gasket matching the Color of the wall panels. Silicon Gasket should be of food grade quality and anti-bacterial in

nature. Sealing of vertical gap with conventional silicon filler should be deemed unacceptable. 6. The antibacterial powder

coating shall have zero solvents or VOCs the system should not affect/damage to the environment of Modular Lab.

Supply of Ceiling System : 1. The snap fit ceiling tiles should be made up of Stainless Steel 304 Grade sheets, 0.6 mm thick and

should be coated with antibacterial powder coating. 2. The metal tiles ceiling should be suspended ceiling, constructed as a

modular framework system with a grid of 4 feet x 2 feet to fulfil the requirements of flexibility and easy future refurbishment

of the modular Lab. Sizes of 2x2 feet for smaller rooms, such as preparation rooms, washing and sterilization rooms. Ceiling

mounting grid should not be visible. 3. The grid should be rigid and remain perfectly stable during all the subsequent site

operations. 4. Room lighting, possible air supply inlets, ceiling service units and return outlets should be integrated into the

Nine Thousand Eighty Seven And Paise

72 1065.00 metal ceiling system. It should be possible to remove the panels individually, with exceptions of those at the edges. 5. The 9087.73 SMT

Seventy Three Only.

ceiling support element should be combination of galvanized / powder coated steel suspension brackets along with threaded

rod. The installation should be carried out with main runners spaced at 1200 mm (center to center) securely fixed to the slab

by the means of roll plug, 3mm thick L-clamp & 8.0 mm diameter GI rod fully threaded (with Hex nut for precise level

adjustment) at 1200 mm maximum (center to center). The distance between the last runner & adjacent wall should not

exceed beyond 600mm.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified One Thousand Six Hundred Seventy Four

edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% And Paise Fifteen Only.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x

0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel

74 899.00 606.95 Six Hundred Six And Paise Ninety Five Only. SMT

A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt

connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per

detail drawing as directed

Providing, supplying, fabricating and erecting in position the structural steel for colums, grill, bars, truss, purlins, runners,

cleats, insert plate, base plate etc for all structural elements as per detail, made up from closed structural steel hollow

sections (RHS/SHS including rolled section ) as per IS 4923 of grade Yst 310 mpa - weather resistant of Tata Structural /

sections or an approved equivalent as per details / drawings/instructions including cutting, bending, jointing, connecting, One Hundred Nineteen And Paise Eighteen

welding and / bolting and / riveting and fabricating and erecting in position etc complete for all levels as directed. The rate to Only.

include all necessary fixtures, fastening including welding rods of standard approvded quality etc for complete the job. The

rate shall also include the one coat of red lead paint, epoxy coat & necessary scaffolding etc. complete as directed

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

Seven Hundred Thirty Four And Paise

76 90.00 bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters 734.19 SMT

and Trusses.(1) 0.80 mm thick sheet.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals

20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, Six Thousand One Hundred Fifty Eight And

77 5.40 6158.35 Quintal

locking arrangements, stoppers handles including applying a priming coat of red lead paint. Paise Thirty Five Only.

Providing and making holes in reinforced cement concrete (RCC) by core cutting method using electrically operated diamond

78 1900.00 core cutting machine of approved make, including drilling of holes of up to 200mm diameter, at all depths, in RCC slabs, 30.32 Thirty And Paise Thirty Two Only. Cm/Depth

beams, columns, walls etc., complete.

Excavation in all types of soil for laying pipes up to 300 mm dia, including forming bottom surface to required level, refilling

Five Hundred Eighty Eight And Paise Sixty

79 30.00 sand till 200 mm around the pipe in layers 150 mm thick, watering, consolidating, and disposing off the surplus earth within 588.69 CMT

the site as directed by the site engineer.(Mannul)

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Excavation and backfilling of trenches for underground mains, S.V. chamber, inspection and welding pits, etc. (in dry area) –

80 5.40 98.13 Ninety Eight And Paise Thirteen Only. CMT

25mm deep Box type S.S metal letters forming composite box made from 1mm thick stainless steel plate of grade 304 having

colour/finish of approved color/finish by consultant / client for following font size to be placed at Main Gate/on exterior wall One Thousand Eight Hundred Thirty Two

with necessary ss clamps, ss screws, ss bolts, hardware and acessoaries compelet(a) 600mm high (For Signage) And Paise Ninety Six Only.

25mm deep Box type S.S metal letters forming composite box made from 1mm thick stainless steel plate of grade 304 having

colour/finish of approved color/finish by consultant / client for following font size to be placed at Main Gate/on exterior wall One Thousand Two Hundred Twenty Two

with necessary ss clamps, ss screws, ss bolts, hardware and acessoaries compelet for 400mm high (For Signage) And Paise Ten Only.

25mm deep Box type S.S metal letters forming composite box made from 1mm thick stainless steel plate of grade 304 having

colour/finish of approved color/finish by consultant / client for following font size to be placed at Main Gate/on exterior wall

Seven Hundred Sixty Two And Paise Fifty

83 30.00 with necessary ss clamps, ss screws, ss bolts, hardware and acessoaries compelet for 250mm high 762.55 Nos.

25mm deep Box type S.S metal letters forming composite box made from 1mm thick stainless steel plate of grade 304 having

colour/finish of approved color/finish by consultant / client for following font size to be placed at Main Gate/on exterior wall

Three Hundred Eighty Three And Paise

84 60.00 with necessary ss clamps, ss screws, ss bolts, hardware and acessoaries compelet for 125mm high 383.80 Nos.

Main Door Signage

3Stainless Steel plate of grade 304 having size 500x150x1mm thick (brush finish) shall be used as base / background. The Fourteen Thousand Nine Hundred Forty

height of the font shall be 30mm for name pasting and the designation shall have 15mm height pasted below the name of Two And Paise Ninety Five Only.

person. vinyl fonts (For Signage)

"You are Here" map

Providing, printing & fixing the Site Map / "You are here" map of High quality inkjet printing on vynil to be pasted on 3mm

thick sunboard and laminated. the same to be fixed on wall / structure having the backing layer of form sheet including

Stainless steel capped screws etc. all complete as per drawing / details.

One Thousand Eight Hundred Fifty One And

Paise Sixty Three Only.

(For Signage)'-Do same as above item 1200 mm x 900 mm (48" x 36") for Building map

(For Signage)'-Do same as above item 1800 mm x 1200 mm (6' x 4') for Charter Maps

(For Signage)'-Do same as above item 1200 mm x 900 mm (48" x 36") for General instruction

Providing & Plantation of semi carpet Lawn (Selection 1) the scope includes prepaid ground for planting of lawn, soil

spreading, mixing of soil & manures, rolling the same etc comp. Labour cost for Lawn Plantation semi carpet Lawn Cost

Two Hundred Forty Eight And Paise Forty Six

87 30.00 including carting, loading & unloading at site etc and includes required dose of pesticides & Ant termite treatment Labour 248.46 SMT

charges for maintenance of semi carpet Lawn including tools & tackles. including Providing, mixing & spreading fertilizer

Manure ,1 year maintenance etc complete as directed by architect /E.I.C

Providing & Plantation of Shrubs (mini 3 feet height) by digging of pit size 1x1x1 feet, adding soil, farm yard manure, DAP,

88 20.00 Pesticide, Plantation of sapling. Making proper tree basin & putting proper support including Providing, mixing & spreading 151.50 One Hundred Fifty One And Paise Fifty Only. Nos.

fertilizer Manure ,1 year maintenance etc complete as directed by architect /E.I.C

Providing & Plantation of Green belt trees by digging of pit size 2x2x2 feet, height 10 feet adding soil, farm yard manure , DAP,

pesticide, plantation of sapling. Making proper tree basin & putting proper support including back filling the trench, watering

89 20.00 50.50 Fifty And Paise Fifty Only. Nos.

etc including Providing, mixing & spreading fertilizer Manure ,1 year maintenance etc complete as directed by architect /E.I.C

Bowing and developing flowering plants grown in nusery having approximate height 4 to 5 ft or Height ad per Landscaps Plan

One Hundred Seventy One And Paise

90 20.00 with natural growith of soil packed in polithyline bag or Earthern pot. Including organic & chemical fertilizer Pesticides, 171.70 Nos.

fungicides, hormones & maintaining the plants up to three months as deserted. Bottol palm.

91 12.00 Providing Loam or Clay soil of approval quality on site. 48.48 Forty Eight And Paise Forty Eight Only. CMT

Labour for spreading and mixing loam or clay soil or river silt evenly over excavated area and levelling the same after clods

92 12.00 12.23 Twelve And Paise Twenty Three Only. CMT

etc. (Rate for one Cu. m. of soil).

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and laying Rubber tectile flooring (Direction and warning tile - 300x300x2.3 mm), Luminance Contrast: Yellow:

93 72.00 47.85, Fixing with: Self-adhesive tape Butyl rubber tape Epoxy Adhesive for desable person anti skit as per requirment and 1515.00 One Thousand Five Hundred Fifteen Only. SMT

instructed by engineer incharge

Providing, Assembling and fixing of Aluminum special section DGU fixed glass panel and two openable shutter WINDOWS with

PVDF coating of approved colour as per architects drawing and details made up of standard make Frame section Size

40X68.4X2mm 1.40Kg/Mt and Mullion section size 53.5x40x1.70mm 0.723Kg/Mt and Shutter Section size 44.5x42x1.2MM WT

Three Thousand Eight Hundred Fifty Seven

94 23.20 0.574 Kg/Mt. with suitable round type clip section size 31.50X25.0X1.1mm thick wt 0.246kg/mt and SS top bottom telescopic 3857.25 SMT

And Paise Twenty Five Only.

type hinges and handle lock and wind stay of same colour and finish. Standard make 5mm thick plain sheet glass with 8mm

gap fixed with EPDN rubber gasket etc. comp. As per approved sample and instructions of EIC.

providing and fixing alluminium approved colour powder coating of 50 micron thickness single shutters Doors having

standared extruded alluminium colour anodized hollow sections Prtly Openable and Partly Fixed Type With frame of size

101mm x 44.5mm x 2MM (aproximate wt 2.60kg per RMT) and door styles and top rail of alluminium section size 47.5mm x

44.5mm x 2 MM (approximate wt 1.25kg per RMT) and bottom rail and lock rail per door of size 114mm x 44.5 mm x 2MM

Three Thousand Five Hundred Eighty Eight

95 359.70 tHICK (aproximate wt 2.75kg per RMT) and providing rubber gasket and glazing clips around the glass all over including 3588.42 SMT

And Paise Forty Two Only.

providing 9mm thick decorative water proof Both side prelaminataed pressed wood based board with fixing Glasing clips

19X17mm including providing heavy Duty locks, handels, stoppers, floor spring, door closers and Ground Glass 5mm thick

(Frosted or obscured on one side) on top with fixing Glasing clips 19X17mm including all labour and equipments etc

Providing, Assembling and fixing of Aluminum special section FIXED GLASS PANEL PARTITIONS made up of standard make

Alloy 6063 T6 section frame Art 1007929 38.50 x 40 x 1.5 mm size wt 0.637 kg/mtr and center mullion frame Art

53.50 x 40 x 1.7 mm wt 0.723 kg/mtr with suitable round type clip section size 31.50 X 25.0 X 1.1 mm thick wt 0.246 kg/mt.

fixed glass panel 5mm plain double glass glazing with 8mm gap including PVDF coating of approved colour. All fixed with dash

Two Thousand Seven Hundred Seventy And

96 138.00 fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 2770.84 SMT

Paise Eighty Four Only.

required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel

screws, all complete as per architects drawing and details.

Construction of granular sub-base 150 mm thick by providing coarse graded machine crushed B.T. material satisfying MOST

specification of grading I (B.T. stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm below - 20 %

Nine Hundred Forty Nine And Paise Forty

97 1006.00 )including spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at 949.40 CMT

OMC and compacting with vibratory roller to achieve the desired density etc. complete.

Providing and laying controlled cement concrete M250 for trimix RCC Excluding the cost of reinforcement & including of using

125 micron polythine sheet at base of concrete using approved quality of polyester fiber (12mm) during mixing of cement

concrete @ 125 gm per bag) and or as per manufacturing ,s specification of cement concerte @ 125 gm per bag) and or as per

manufacater's specification including preparing the sub base with form work of M.S Chhanel of requiared size to maintain

level and slope of concrete with using surface vibrator ,finishing the surface with power floter and trove ,light brooming on

Four Thousand Seven Hundred Ninety Seven

98 240.00 the surface with providing construction joints of size 10 mm wide 25mm deep in transverse direction @ 4.5 m C/C with 4797.50 CMT

And Paise Fifty Only.

sealing the same with approved quality bitumen sealent and providing expansion joints of size 25 mm width and up to

throught depth of concete using 25 mm thick dura board HD -100 of approved quality and sealing the same with approved

quality bitumen sealent at 40 meter C/c and or as directed using concrete cutter machine with necessary equipments ,labours

tools tackles etc complete as directed by EIC. For Road Work

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Seven Hundred Six And Paise Ninety Three

Sand layer and 50 MM Stone dust for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : Only.

SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm

Three Hundred Seventy Four And Paise

100 400.00 thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint 374.92 RMT

Ninety Two Only.

with C:M 1:3 (1cement:3fine sand) etc complete. (upto 10 ton)

Supplying & filling fine sand pana in 150 mm compacted thickness over the base including necessary compaction, watering

Three Hundred Eighty Three And Paise

101 4.00 etc. complete. Item includes leveling by using vibratory plates compacted machine and as directed by engineer in charge. 383.80 CMT

Providing and applying one coat of water based exterior primer of approved brand and make as mentioned below on wall

surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter. Item includes making

the surface even and smooth by sand papers. Rates are inclusive of all the material and labourers and scaffolding work, One Hundred Seventy And Paise Seventy Six

cleaning of the floors etc. required for the work with weather proof exterior emulsion paint on wall surface (two coats) to Only.

give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Applying priming coat over new steel and other metal surface after cover and including preparing the surface by throughly

cleaning oil, grease dirt and other foreign matter and scoured with brushes fine steel wool, scrapers and sand paper with

One Hundred Five And Paise Thirty One

103 7.00 ready mixed priming paint brushing red lead.& Painting two coat on new steel and other metal surface with synthetic enamel 105.31 SMT

paint, brushing to give an even shade including cleaning the surface of all dirt, dust, oil, grease and other foreign matters.

Providing and fixing decorative entrance gate made out of cast iron and various mild steel tabular section combination (Given

as per detail drawing), the Ornamental entrance gate should be fixed at compound wall including pattern and die making

cutting , welding , grinding, fabrication , fixing in position at compound wall with necessary pedestal, bearing block and other Four Thousand Seven Hundred Seventeen

locking arrangement. The entrance gate should be painted with two coats of priming coat of paint, and three coat of rubber And Paise Seventy One Only.

paint (PU Modified Alkys based finish) etc complete. As per detail design and instruction of architect.

Constructing,Providing and Fabricating cattle trap using channel section frame of size ISHB series 100m x 100 mm X 5.4 mm

(Weight 27.10 kg/RMT) and L Section 75 mm x 75mm X 6 mm (Weight 6.80 Kg / RMT) at frame & central part Intermediate

Support for welding G.I. Pipe at 63mm space of size 63mm dia C Class in a frame made of channel section of 65mm x 65mm X

Seven Thousand Seven Hundred Seventy

105 15.00 5 mm(Weight 4.90 Kg / RMT) all round including necessary Two coat prmers and Two coat of Oil paints as suggested & fixing 7774.98 SMT

Four And Paise Ninety Eight Only.

the urit on prepared chamber of masonary wall using MS hold fast embeded in masnary wall top as per detail drawings & as

directed by Engineer in charge as per drawing by necessary arrangement etc.complete.

Providing and fixing high fencing with Y shape long M.S. Angle posts 40mm x 40 mm x6 mm (0.60 H X 0.60 W ) and oil painting

3 coats fixed at 2.5 Mt,C/c. with 3layer of barbed wire and on Y shape Concertina Coil Diameter 900 mm, Razor Type Single

106 202.00 610.81 Six Hundred Ten And Paise Eighty One Only. RMT

Razor GSM 40 GSM, Length 100 m, Material Iron, Surface Treatment, Galvanized Etc Complete

Providing and fixing in position cowel went to pipes.(B) 75mm dia. Three Hundred Ninety Three And Paise Four

Providing and fixing in position cowel went to pipes.(C) 100mm dia Five Hundred Five And Paise Seventeen

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. One Hundred Eighty Six And Paise Eighty

Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. Two Hundred Three And Paise Eighty Two

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Four Hundred Twenty And Paise Sixty Three

Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. Three Hundred Fourteen And Paise Seventy

Providing and fixing ball cock of approved. quality as One Hundred Thirty Seven And Paise Eighty

directed.(B) Abonite (ii) 50mm dia. Nine Only.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

One Hundred Seventy And Paise Thirty Six

114 1250.00 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling 170.36 RMT

and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

Two Hundred Fifty Three And Paise Eighty

115 2240.00 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling 253.82 RMT

and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

Four Hundred Forty Seven And Paise

116 540.00 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling 447.72 RMT

Seventy Two Only.

and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

117 420.00 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling 660.58 Six Hundred Sixty And Paise Fifty Eight Only. RMT

and floor etc. complete. [F] 50mm.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with Each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Eight Hundred Thirty Four And Paise Thirty

160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as Eight Only.

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia.

Three Hundred Thirty Eight And Paise Ninety

119 1020.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 338.95 RMT

floor.(G)110 mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of

Five Hundred Ninety Nine And Paise Sixty

120 130.00 self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. 599.64 Each

Providing erecting and fixing double coated ISI water tank of required capacity Each with all necessary fittings and connection

121 80000.00 3.95 Three And Paise Ninety Five Only. litre

etc. complete on terrace

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts.(i) 15mm dia. Three Hundred Eight And Paise Seventy

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. Eight Hundred Fifty Nine And Paise Forty

sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. One Only.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. Six Hundred Sixteen And Paise Forty Two

brass scews.(B) 600mm x 20mm size. Only.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x One Thousand Two Hundred Ninety Two

300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. And Paise Nineteen Only.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the

Two Hundred Fifty Seven And Paise

126 300.00 following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 257.19 RMT

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1- Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in

cement concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

Eleven Thousand Forty Two And Paise

127 4.00 including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm 11042.74 Each

Seventy Four Only.

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With

230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for Five Hundred Twenty Two And Paise Ninety

depth from 0.9M to 1.5M. Six Only.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1- Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in

cement concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

Nineteen Thousand Three Hundred Forty

129 2.00 including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm 19349.63 Each

Nine And Paise Sixty Three Only.

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With

230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

(II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof over item No.24.27 (I) for Three Hundred Ninety Seven And Paise

depth from 1.50M. to 2.25M. Nineteen Only.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti corrosive paint etc. Two Hundred Seven And Paise Sixty Six

complete. Only.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1

Two Thousand Nine Hundred Thirty Two

132 16.00 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 2932.93 Each

And Paise Ninety Three Only.

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry Two Hundred Forty Two And Paise Thirty

chamber.(i) for 455mm x 610mm size. Nine Only.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

Three Thousand Six Hundred Sixty And

134 14.00 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm 3660.76 Each

Paise Seventy Six Only.

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry Two Hundred Sixty Four And Paise Eighty Six

chamber.(ii) for 500mm x 700mm size. Only.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1

Seven Thousand One Hundred Eighty And

136 12.00 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 7180.44 Each

Paise Forty Four Only.

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry Three Hundred Twenty Five And Paise Fifty

chamber.(iii) for 600mm x 850mm size. Nine Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and fixing on platform stainless steel Sink glossy ASIS 304 grade x 1mm thick with over all size 610x460mm & bowl

size 560x410x200mm & SS Pillar cock with extention body including fixing the sink in platform & making good the same Nine Thousand Five Hundred Fifty Five And

including the cost of PVC waste pipe of 32mm dia. and PVC waste coupline etc complete as directed by EIC. Paise Eighty Only.

Providing and fixing Two way BIB cock with wall flange of genuine, in with model no , water tap brand or approved ISI brand Three Thousand One Hundred Thirty One

quality, fixing in pieline and testing the same… etc., complete., as directed by EIC Only.

Providing and fixing wash down water closet dual flushing system type (European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement mortar 1:1 (1 cement five sand) including providing and fixing plastic seat

cover for wash down WC with CP brass hinges and rubber buffers back plastic seat and including fitting such as lead valve

Four Thousand Two Hundred Forty Two

140 38.00 siphon 15 mm dia brass ball valve with polythene float CP brass handle unions and couplings for connection with inlet out let 4242.00 Each

and over flow pipes 40 mm dia porcelain enameled flush bend including cutting holes in walls and making good the same

connection the flush bend with cistern and closet vitreous china.

Providing and fixing Wash Basin vitreous china table top wash basin size 560mm x 450 mm in white colour. with single hole

for pillar tape with CP or MS brackets painted white including cutting holes and making good the same including SS waste

coupling of 32 mm dia size half theread with 80mm height for wash basin with rubber plug, SS bottle trap with internal Four Thousand Fifty Eight And Paise

partition of 32mm size with 250mm &190mm long wall flange connection pipes and wall flange of approved quality with Eighteen Only.

necessary fitting for wash basin, SS Pillar cock with extention body with necessary fittings etc. complete.

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware 550mm x 300mm. including flush cock, bottle trap with internal partition of 32mm Two Thousand One Hundred Seventy Eight

size with 250mm &190mm long wall flange connection pipes and wall flange with necessary fitting for wash basin connection And Paise Fifty Seven Only.

with waste pipe trap etc. complete

Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 50mm dia. Eight Hundred Seventy One And Paise Sixty

Providing laying and jointing PVC SWR pipes IS 13592 for Drain - 50 mmdia it's accessories. Three Hundred Thirty Seven And Paise

Thirty Four Only.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 Five Hundred Twenty And Paise Fifteen

Providing and fixing SS finish Angular Stop cock for wash basin One Thousand Seven Hundred Forty Two

And Paise Twenty Five Only.

Providing and fixing Handicap wash down water closet European type WC pan (Wall Hung) like SIZE 365x545x360MM and P

trap distance 23.5 cms with integral P trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) including providing and fixing of 1) Health Faucet hand shower heavy duty with SS braided hose 1.2 MT long pipe to Twenty Three Thousand Five Hundred Thirty

water closet - with Single Piece Slim Concealed Cistern Body with Installations Kit & “S-Type” drain pipe connection set for Three Only.

Wall Hung WC (without Flush Control Plate) with Control Plate Opal ,Toilet roll holder -N, including grab bar etc,complete

Providing and Fixing Percolation well (450 mm dia tube well up to 40 meter depth) including parts Johnson V wire screen, MS

pipe, gravel, vent pipe, etc. Infiltration testing & including boring and sinking 175 mm diameter percolation pile with 160 mm

OD uPVC casting pipes & screens (C.S.) IS 12818:1992 as per specifications with hand auguring system and clearing the site on One Lac Fifty Two Thousand Four Hundred

completion of depth from max 24 meter, with gravel, vent pipe 50 mm dia 6 meter length, 160 mm dia strainer pipe 3 mm Forty Nine And Paise Forty Only.

opening, 300 mm height 300 mm dia uPVC strainer in sump, etc. complete job as specified and as per detailed drawings as

Providing, Installation & Testing of 1000 LPH Water Chiller Plant with 1 No. of raw water feeding pump 1 H/P with 2900 RPM

with Class F insulations, 2 No. of 13 x 54 vessel for multi grade filter and activated carbon filter, F.R.P. MOC with 10 kg

One Lac Seven Thousand Three Hundred

149 2.00 maximum pressure absorbing capacity compatible for 104.47 liter volume and with hardcore material Aventura / Paintair & 1 107322.60 Nos.

Twenty Two And Paise Sixty Only.

lot of sand + media + carbon of 900 IV 4/8 mesh size coconut shell base for absorbing colour / odour / dust / rust / and

suspended 110 kg etc., as directed by Engineer in charge.

Fully Automatic Pressurized water distribution through Hydro-pneumatic Water Distribution System, HMI (color touch screen

display), PLC & VFD based control panel with pressure booster system (SUBpack), Type: 3 x SLSJ 24-05, Pump MOC: Complete

Five Lac Seventeen Thousand Ninety Nine

150 1.00 SS 304, No. of pump: 3 nos. (2W + 1S), Total system flow: 77.4 m³/hr (with standby pump), Each pump flow: 25.8 m³/hr @ 517099.80 Nos.

And Paise Eighty Only.

head: 40 meter, Each motor: 4 kW (5.5 HP), 2900 RPM, 3-phase, 50 Hz, Pressure tank capacity: 200 liter, as directed by

Engineer in charge.

Construction of water Harvesting well as per design and drawing with R.C.C. slab in C.C. 1 : 2 : 4 including excavating , filling

bed concrete C.C. 1:4:8 ,0.15 mt. thick with brick masonary wall 0.23 m thick in C m 1 : 5 Including finishing with cement

Sixty Four Thousand Six Hundred Seventy

151 2.00 plaster 20mm thick double coat plaster at out side as directed by Engineer-In-Charge. In side dimension 2.50 x 2.50 x 3.00 mt, 64675.35 Nos.

Five And Paise Thirty Five Only.

with Drilling of 200mm dia bore hole up to 10. mt depth in well and 200mm dia. Perforated PVC casing pipe 8kg f/cm2 up to

6.00 mt depth in well center.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia.

Two Hundred Twenty Nine And Paise

152 295.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 229.73 RMT

Seventy Three Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Detailed design and engineering of providing ,construction,testiing and commissioning DEWATS (Decentralized waste water

treatment system) plant for sewage treatment based on anaerobic treatment systems constructing of setting chambers

(Primary/secondary) anaerobic baffle reactor, anaerobic filter, treated water storage tank necessary pipeing works for inlet,

outlet, scouring and bypass arrangment with required valves, gates, drain, screen inlet chambers etc. complete including cost

of all associated civil, mechanical, electrical works, process and instumentation diagram, hydraulic diagram, site layout plan

Twenty Four Lac Three Thousand Eight

153 1.00 and site grading plan, single line diagram, control philosophy, quality assurance plan, civil and mechanical general arrangment 2403800.00 Nos.

drawings, structuraldesigns and drawings, construction drawings, mechanical equipments data sheet and drawing, as built

drawings, operations and maintenance manuals etc. (A) 0.1 MLD capacity DEWATS ,Add (Prorate) for capacity above 0.1MLD

up to 0.25MLD 1) Setting chambers(Primary/secondary) 2) Anaerobic Baffle Reactor 3) Anaerobic Filter 4) Treated water

Main Fire Hydrant Pump- Electric Motor Driven: SITC of: Back pull out type -Single Stage, Self Mriming, Centrifugal Pump for

Main Fire Pump with Electric Motor, Base frame and Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-SS410.

Flow Capacity: 2280 LPM Head: 75 mtr Speed: 2900 Approx Pump shall be capable of furnishing not less than 150% of rated Two Lac Ninety Six Thousand Eight Hundred

capacity at a head not less than 65% of rated head The shut off head shall not exceed 120% of rated head. UOM:-Price Per Eight And Paise Seventy Only.

Complete set of Pump + Motor + Accessories. Note:-01. Minor civil work like tank hole/ Core Cutting etc. are in bidders scope.

Location: In Pump Room

Main Fire Sprinkler Pump- Electric Motor Driven: SITC of: Back pull out type -Single Stage, Self Mriming, Centrifugal Pump for

Main Fire Pump with Electric Motor, Base frame and Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-SS410.

Flow Capacity: 2280 LPM Head: 75 mtr Speed: 2900 Approx Pump shall be capable of furnishing not less than 150% of rated Two Lac Ninety Six Thousand Eight Hundred

capacity at a head not less than 65% of rated head The shut off head shall not exceed 120% of rated head. UOM:-Price Per Eight And Paise Seventy Only.

Complete set of Pump + Motor + Accessories. Note:-01. Minor civil work like tank hole/ Core Cutting etc. are in bidders scope.

Location: In Pump Room

Jockey Fire Pump- Electric Motor Driven: SITC of: Back Pull-out End Suction Type -Single Stage, Self Priming, Centrifugal Pump

for Jockey Fire Pump with Electric Motor, Mechanical Seal, Base-frame and Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft-

SS 410, Sleeve-SS410. Flow Capacity: 180 LPM Head: 75 mtr Speed: 2900 Approx Pump shall be capable of furnishing not less

One Lac Seven Thousand Seven Hundred

156 1.00 than 150% of rated capacity at a head not less than 65% of rated head The shut off head shall not exceed 120% of rated head. 107756.90 Set

Fifty Six And Paise Ninety Only.

UOM:-Price Per Complete set of Pump + Motor + Accessories. Note:-01. Minor civil work like tank hole/ Core Cutting etc. are

in bidders scope. Location: In Pump Room

Standby Fire Pump- Diesel Engine Driven SITC of: Diesel Engine driven Standby Pumping System complete with,diesel engine,

Back Pull-out Type Single Stage, Self Priming, Centrifugal Pump, Couplings & Base-frame: MOC:- Pump Casing-CI, Impeller-

Bronze, Shaft-SS410, Sleeve- SS410. Flow Capacity: 2280 LPM Head: 75 mtr Speed: 2900 LPM Diesel Engine includes 100 ltr Five Lac Thirteen Thousand Five Hundred

diesel tank, battery, battery charger, engine oil and coolant. UOM:-Price Per Each Set. Note:-01. Minor civil work like tank Ninety Five And Paise Ten Only.

hole/ Core Cutting etc. are in bidders scope. Location: In Pump Room

Fire Pump Control Panel- Auto and Manual Type. Supply, Installation and Testing of: Electric Control Panel for Electric Motor

One Lac Thirty Four Thousand Seven

158 1.00 Driven Main Fire Pump and Jockey Fire Pump. all pumps can be Start Automatically (by Pressure Switch) & Manually. Design 134784.50 No.

Hundred Eighty Four And Paise Fifty Only.

As per the Detail Specifications given. UOM:-Price Per Set. Location: In Pump Room

Air Vessel: SITC of Pressurized Air Vessel f Size 450 mm Dia x 2000 mm long fabricated from 10 mm thick MS Plate with 25 mm Forty Thousand Six Hundred Fifty Two And

drain valve, air release valve with ball valve on top and isolation valve. Paise Fifty Only.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Five Hundred Thirty Five And Paise Thirty

160 30.00 FRLS type with necessary clamps or in existing trench / pipe of following size of cables 535.30 RMT

- 3.5 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete

Seven Hundred Forty Two And Paise Thirty

161 8.00 with out going tails, insulating tape etc for following size of cables. 742.35 No.

- 3.5 core 70 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Nine Hundred Thirty Nine And Paise Thirty

- 70 Sq.mm. Only.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Two Hundred Forty Four And Paise Forty

163 30.00 FRLS type with necessary clamps or in existing trench / pipe of following size of cables 244.42 RMT

- 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete

Five Hundred Ninety Two And Paise Eighty

164 2.00 with out going tails, insulating tape etc for following size of cables. 592.87 No.

- 4 core 16 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

165 6.00 707.00 Seven Hundred Seven Only. No.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Pressure Gauge with Siphon Tube and Cock. Supply, Installation and Testing of: Pressure Gauge with Siphon Tube and Cock.

One Thousand One Hundred Sixty One And

166 10.00 MOC:-4” Dial- Glycerin filled- Stainless Steel Body Pressure Gauge with GI Siphon Tube andBrass Cock. Size:-Dial: 4” (100 mm) 1161.50 No.

Paise Fifty Only.

Range: 0 – 16 Bar (kg/cm2) UOM:-Price Per Unit

Pressure Switch with Siphon Tube and Cock. Supply, Installation and Testing of: Pressure Switch with Siphon Tube and Cock. One Thousand Two Hundred Seventy Seven

Size:- Range suitable for System Design Pressure. UOM:-Price Per Unit And Paise Sixty Five Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), Three Thousand Four Hundred Thirteen And

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: Paise Eighty Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), Three Thousand Seven Hundred Eighty Two

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: And Paise Forty Five Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), Two Thousand Eight Hundred Forty Seven

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: And Paise Nineteen Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), One Thousand Nine Hundred Twenty Six

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: And Paise Seven Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), One Thousand Four Hundred Forty Nine And

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: Paise Thirty Five Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), One Thousand One Hundred Fifty Six And

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: Paise Forty Five Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.),

174 365.00 900.92 Nine Hundred And Paise Ninety Two Only. RMT

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size:

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), Six Hundred Ninety Six And Paise Ninety

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: Only.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), Four Hundred Twenty Two And Paise

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: Eighteen Only.

Gate /SluiceValve Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type) Valve with necessary

Sixty One Thousand Four Hundred Forty

177 2.00 pipe fitments, hardware and consumables. MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). 61443.35 No.

Three And Paise Thirty Five Only.

Standard: ISI Marked. UOM:-Price Per Each No. Size: 200 mm

Gate /SluiceValve Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type) Valve with necessary

Thirty Six Thousand Four Hundred Seventy

178 6.00 pipe fitments, hardware and consumables. MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). 36471.10 No.

One And Paise Ten Only.

Standard: ISI Marked. UOM:-Price Per Each No. Size: 150 mm

Gate /SluiceValve Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type) Valve with necessary

Eighteen Thousand Four Hundred Thirty

179 2.00 pipe fitments, hardware and consumables. MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). 18432.50 No.

Two And Paise Fifty Only.

Standard: ISI Marked. UOM:-Price Per Each No. Size: 80 mm

Check Valve Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with necessary pipe fitments, hardware

Six Thousand Six Hundred Fifty And Paise

180 3.00 and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 150 mm 6650.85 No.

Eighty Five Only.

Check Valve Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with necessary pipe fitments, hardware

Two Thousand Eight Hundred Seven And

181 1.00 and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 80 mm 2807.80 No.

Paise Eighty Only.

Check Valve Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with necessary pipe fitments, hardware

One Thousand Seven Hundred Eighty Seven

182 1.00 and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 50 mm 1787.70 No.

And Paise Seventy Only.

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. Four Thousand Three Hundred Fifty Eight

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 150 mm And Paise Fifteen Only.

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. Two Thousand Nine Hundred Thirty Nine

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 100 mm And Paise Ten Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. Two Thousand Two Hundred Forty Two And

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 65 mm Paise Twenty Only.

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. One Thousand Five Hundred Eighty And

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 50 mm Paise Sixty Five Only.

Strainer. Supply, Installation and Testing of: Y Type Strainer with necessary pipe fitments, hardware and consumables.

187 1.00 MOC:-Body: Cast Iron, Mesh: SS-304. Working Pressure: 10 Bar UOM:-Price Per Each No. Size: 200 mm 40400.00 Forty Thousand Four Hundred Only. No.

Air Release Valve- 25 mm Supply, Installation and Testing of: Air Release Valve Check Valve with necessary pipe fitments, One Thousand One Hundred Eighty Six And

hardware and consumables. MOC:-Body: Gunmetal / SS. UOM:-Price Per Each No. Paise Seventy Five Only.

Fire Hydrant Landing Valve (Stainless Steel (SS-304), ISI Marked): Supply, Installation and Testing of: Fire Hydrant Landing

Valve with necessary pipe fitments, hardware and consumables. MOC:-Body: Stainless Steel (SS-304), Working Parts: Stainless Three Thousand Seven Hundred Seventy

Steel (SS-304), Coupling: Stainless Steel (SS-304), Standard: -ISI Marked. Size:-63 mm (Flange End: NB 75 mm, PCD 160 mm) Two And Paise Thirty Five Only.

UOM:-Price Per Each No.

Fire Hose Pipe (Delivery Hose)- 63 mm x 15 m Supply, Installation and Testing of: Fire Hose with Hose Couplings.

Three Thousand One Hundred Thirty One

190 50.00 RRL (ISI Mark- Type A) Fire Hose. Hose Couplings: ISI Marked Stainless Steel. With SS Wire Binding. Standard: - ISI Marked & 3131.00 No.

TAC Approved Hose. Size:-63 mm dia x 15m long Hose. UOM:-Price Per Each Set.

Cabinet For Fire Hose (Hose Box)- Double Type Supply, Installation and Testing of: Fire Hose Cabinet (Hose Box) suitable to

accommodate 02 no. of 15 m long fire hoses and 01 no. of nozzle. With Lock-n-key facility. Wall Mounting Design. MOC: 16 Two Thousand Six Hundred Sixty One And

Gauge MS Box with Powder Coating Standard: - As per Guidelines. Size:- Suitable for 02 nos. of 15 m long hoses. UOM:-Price Paise Thirty Five Only.

Fire Hose Nozzle- Short Branch Pipe Nozzle. Supply, Installation and Testing of: Short Branch-pipe Nozzle. MOC: Stainless One Thousand One Hundred Sixty One And

Steel (SS-304). Standard: ISI Marked, Heavy Quality. Size:- 63 mm X 20 mm UOM:-Price Per Each No. Paise Fifty Only.

Fire Hose Reel Set (ISI)-19 mm x 30 m -Rubber Hose. Supply, Installation and Testing of: Fire Hose Reel Set with necessary

pipe fitments, hardware and consumables. MOC:-Drum: 16 G Powder Coated MS, Hose: 19 mm X 30 m heavy-duty RUBER Five Thousand Five Hundred Thirty Nine And

hose. Shut-off Nozzle: SS-304. With Control Valve: SS- 25mm Ball Valve. Standard: ISI Marked. Heavy Quality. Size:-19 mm dia Paise Eighty Five Only.

x 30m long Hose. UOM:-Price Per Each No.

Fire Service In-let (In-let Connection for Fire Brigade)-4 Way Type. Supply, Installation and Testing of: Fire Service Inlet with

necessary hardware and consumables. MOC:-Body: Heavy-duty CI. Couplings/NRV: Gunmetal. Standard: -Made As per IS Five Thousand Seven Hundred Sixteen And

Standard- Heavy duty quality. Size:-Couplings: 63 mm, 150 mm E-table Flange End. UOM:-Price Per Each No. Paise Sixty Only.

Sprinkler Head/ Nozzle. Supply, Installation and Testing of: K 5.6 Pendent type Standard Response Sprinkler rating of

Two Hundred Eighty Seven And Paise Eighty

195 600.00 deg.C. with required accessories. MOC:-Brass Standard: UL Listed Size:-15 mm (1/2”) UOM:-Price Per Each No. 287.85 No.

Flow Switch Supply, Installation and Testing of: Flow Switch with necessary pipe fitments, hardware and consumables.

Four Thousand Three Hundred Fifty Eight

196 18.00 UOM:-Price Per Each No. With all wiring/ cabling up to control panel and all electrification. 4358.15 No.

And Paise Fifteen Only.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

FRLS type with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. One Hundred Eighty Six And Paise Eighty

(a) 3 core 2.5Sq. mm Five Only.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete

Five Hundred Ninety And Paise Eighty Five

198 36.00 with out going tails, insulating tape etc for following size of cables. 590.85 No.

(a) 2 to 4 core 2.5 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Six Hundred Seventy Three And Paise Sixty

(A) 1.5/ 2.5/4/6 Sq.mm Seven Only.

Providing and fixing, testing and commissioning of Drainning Valve 50mm dia with by pass drain connection as required. One Thousand Five Hundred Eighty And

Paise Sixty Five Only.

Providing and fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS

Twenty Six Thousand Four Hundred Twenty

201 7.00 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 26426.65 No.

Six And Paise Sixty Five Only.

Cylinder as per IS

Fire Extinguisher- ABC Powder type, 6 kg. Supply, Installation and Testing of: ABC Powder Fire Extinguisher necessary

Two Thousand Six Hundred Seventy One

202 35.00 hardware and consumables. Stored Pressure Mechanism. Charged with MAP-50 % (ABC) Dry Powder. With wall mounting 2671.45 No.

And Paise Forty Five Only.

clamp. Size:-6 kg Powder. UOM:-Price Per Each No.

Fire Extinguisher- CO2 Gas type, 4.5 kg. Supply, Installation and Testing of: CO2 Gas Fire Extinguisher with necessary

Five Thousand Five Hundred Nineteen And

203 35.00 hardware and consumables. Standard: - Confirming to IS: 15683-2006 with ISI Mark. Size:-4.5 kg UOM:-Price Per Each No. 5519.65 No.

Paise Sixty Five Only.

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly

Three Thousand Two Hundred Fifty Two

204 8.00 painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on 3252.20 No.

And Paise Twenty Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm

205 2.00 height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly 4646.00 Four Thousand Six Hundred Forty Six Only. No.

painted with one coat of red lead and two coats of approved enamelled silver paint.

Safety Signage- Night Glow Type: SIRC of: Single Side Printed Night Glow (Glow in Dark ) Safety Signage. Printed on PVC sticker Five Hundred Eighty And Paise Seventy Five

sheet and pasted on 3-5 mm thick PVC foam sheet. Size: 10” X 10”. Only.

Approval of Fire Hydrant & Entire Fire Protection System from Local Fire Authority and any other relevant statutory authority

at initial and various other stages of work, including preparation of report/drawings as per fire authority requirement. One Lac Fifty One Thousand Five Hundred

Contractor shall include cost of all liason work which are not explicitly mentioned above but are mandatory to have fire Only.

authority approval (any statutory charges will be paid extra).

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base Five Hundred Eighty two And Paise Seventy

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with Seven Only.

necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete cat III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC /

209 1246.00 wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. 200.99 two Hundred And Paise Ninety Nine Only. Pt.

with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of

210 355.00 following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with 809.01 Eight Hundred Nine And Paise one Only. Pt.

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete cat III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Seven Hundred Twenty Five And Paise

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or Eighteen Only.

ceiling rose or H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling Eight Hundred Ninety Four And Paise Eighty

as per pipe erected with following type of accessories [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire Six Only.

from mcb db board. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

213 200.00 612.06 Six Hundred Twelve And Paise Six Only. Pt.

erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box,

214 235.00 single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with 309.06 Three Hundred Nine And Paise Six Only. Pt.

following type accessories Cat. III

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed one Thousand one Hundred Thirty Three

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch And Paise Twenty two Only.

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary one Hundred Sixty And Paise Fifty Nine

connections as per site situation directed by Engineer In charge. Only.

(8) Computer RJ-45 socket Cat.III

217 7000.00 Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6 e 76.76 Seventy Six And Paise Seventy Six Only. Mtr.

218 1500.00 Providing & Erecting 6 core fibre optic SM 9/125um double sheath, CSTA, Unitube, Outdoor cable (per m) 60.60 Sixty And Paise Sixty Only. RMT

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

one Hundred Sixty And Paise Fifty Nine

219 105.00 connections as per site situation directed by Engineer In charge. 160.59 Ea

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

220 2000.00 connections. 20.20 Twenty And Paise Twenty Only. Mtr.

[A] Conductor Size 0.5 mm

Providing & erecting main Distribution (MDF) indoor

one Thousand Three Hundred Sixty Eight

221 6.00 type, back mounted frame as per DoT standard approved with krone strips 1368.55 Each

And Paise Fifty Five Only.

(b) Suitable for 20 pair

Supply of Fibreglass Step (A Type)Ladder-8 FT having following specifications :

It should have nonconductive Structural moulded top, with Slots to keep tools close at hand, inside Spreader Braces,

Aluminium Feet with thick rubber tread, nonconductive Full channel Fibreglass and two pairs of gusset support at the Eighteen Thousand one Hundred Ninety one

bottom step. All gussets are heavy duty steel. And Paise Eleven Only.

Capacity : 300 lbs. Step Size : 3”

Width : 26” Approx. Spread : 54” Approx. Wt. : 15 Kg Approx. Cube :

Supply of Fibreglass Platform Step (A Type) Ladder - 15 FT having following specifications :

It should have large fully serrated Thirty one Thousand Six Hundred Thirty Six

platform 15” wide 20” deep which locks ladder , Aluminium feet with thick rubber tread, top rail guard to serve as a railing, And Paise Twenty Three Only.

two pairs of gusset support at the bottom step and All gussets are heavy duty steel. Capacity : 300 lbs

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant

facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external

number, Once only ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward

Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide

one Lac Seventy Four Thousand Six Hundred

224 1.00 System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call 174606.78 Each

Six And Paise Seventy Eight Only.

Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

[E] No of Extension 128, No of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible : ISDN and

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary one Hundred Sixty And Paise Fifty Nine

connections as per site situation directed by Engineer In charge. Only.

(4) TV Co-axial Socket outlet Cat.III

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids

226 20.00 @ suitable coverage overall sheathed with black PVC 39.39 Thirty Nine And Paise Thirty Nine Only. Mtr.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

one Hundred Fifteen And Paise Fourteen

227 400.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and 115.14 Mtr.

bolts if required.

(f) One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

one Hundred Seventy Seven And Paise

228 400.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and 177.76 Mtr.

Seventy Six Only.

bolts if required.

(g) One wire 16.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

two Hundred Ninety Five And Paise Ninety

229 400.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and 295.93 Mtr.

bolts if required.

(h) One wire 25.00 sq. mm

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

Three Hundred Seventy Six And Paise

230 200.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and 376.73 Mtr.

Seventy Three Only.

bolts if required.

(i) One wire 35.00 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

231 5000.00 78.78 Seventy Eight And Paise Seventy Eight Only. Mtr.

following size.

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

232 4000.00 104.03 one Hundred Four And Paise Three Only. Mtr.

following size.

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

one Hundred Forty And Paise Thirty Nine

233 2000.00 colour for earth continuity of following size 140.39 Mtr.

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

234 8000.00 of pipes, in 33.33 Thirty Three And Paise Thirty Three Only. Mtr.

approved manner as directed

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for one Thousand one Hundred Fifty two And

(A) single phase incoming and horizontal single Paise Forty one Only.

(b) sheet steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for one Thousand Four Hundred Ninety two

(A) single phase incoming and horizontal single And Paise Seventy Eight Only.

(b) sheet steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for two Thousand Three Hundred Thirty Nine

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation And Paise Sixteen Only.

(b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for two Thousand Nine Hundred Thirteen And

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation Paise Eighty Five Only.

(b) sheet steel double door

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for Three Thousand Four Hundred Twelve And

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation Paise Seventy Nine Only.

(b) sheet steel double door

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for Three Thousand Eight Hundred Seventy

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation Four And Paise Thirty Six Only.

(b) sheet steel double door

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

one Hundred Twenty Three And Paise

241 1250.00 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 123.22 Ea

Twenty two Only.

with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity &

242 20.00 confirms to IS : 8828 in existing box having following capacity 306.03 Three Hundred Six And Paise Three Only. Each

(A) 6 to 32 Amp. Cat-III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity &

Three Hundred Twenty Five And Paise

243 12.00 confirms to IS : 8828 in existing box having following capacity 325.22 Each

Twenty two Only.

(B) 40 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

Six Hundred Fifty Five And Paise Forty Nine

244 18.00 to IS :8828 in existing box having following capacity 655.49 Each

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

Seven Hundred Thirty Six And Paise Twenty

245 57.00 to IS :8828 in existing box having following capacity 736.29 Each

(b)40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

246 55.00 to IS :8828 in existing box having following capacity 811.03 Eight Hundred Eleven And Paise Three Only. Each

(c) 63 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

two Thousand one Hundred Sixty Six And

247 55.00 action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected 2166.45 Ea

Paise Forty Five Only.

(i) 25 Amps.DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

two Thousand Four Hundred Fifty Eight And

248 125.00 action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected 2458.34 Ea

Paise Thirty Four Only.

(ii) 40Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

two Thousand Nine Hundred Nineteen And

249 99.00 action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected 2919.91 Ea

Paise Ninety one Only.

(iii) 63 Amps. DP Cat. III

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with one Thousand Nine Hundred Sixty one And

necessary bus bar supports /insulators, main cable socket to Each bar, erected in existing cubical panel with Paise Forty two Only.

necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with Three Thousand two Hundred two And

necessary bus bar supports /insulators, main cable socket to Each bar, erected in existing cubical panel with Paise Seventy one Only.

necessary connections.

(B) Suitable for 200 Amp. capacity

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with Ten Thousand Five Hundred Fifty Nine And

necessary bus bar supports /insulators, main cable socket to Each bar, erected in existing cubical panel with Paise Fifty Five Only.

necessary connections.

(E) Suitable for 630 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with Thirteen Thousand one Hundred Ninety

necessary bus bar supports /insulators, main cable socket to Each bar, erected in existing cubical panel with Nine And Paise Sixty Nine Only.

necessary connections.

(F) Suitable for 800 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with Sixteen Thousand Four Hundred Ninety Nine

necessary bus bar supports /insulators, main cable socket to Each bar, erected in existing cubical panel with And Paise Thirty Six Only.

necessary connections.

(G) Suitable for 1200 Amp. Capacity

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to

Six Thousand Seven Hundred Ninety And

255 56.00 work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 6790.23 Ea

Paise Twenty Three Only.

housing. Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at

V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Eight Thousand Eight Hundred Sixty one And

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Cat III Paise Seventy Four Only.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at

V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Seventeen Thousand Eight Hundred Forty

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing. Cat III Three And Paise Sixty Seven Only.

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 K.A. and

above at 415 V having normal current rating up to 630A. with variable thermal & magnetic release suitable to work on Thirty Thousand Nine Hundred Ninety one

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing And Paise Eighty Five Only.

Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICUICSICW (1

sec)Vsr690 v, Ui1kv ,impulse voltage12 kv with following type of relay and accessories.(1) Manual Draw out type (MDO) with

one Lac Thirty Four Thousand two Hundred

259 2.00 following type of relay system (B) with microprocessor Release with over load, short circuit, earth fault protection and 134219.91 Ea

Nineteen And Paise Ninety one Only.

metering display in modular design with LED display and Test Trip button facility, CTs and auxiliary contacts, of following

current ratings. (i) 800Amp 50 kA Cat III

Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICUICSICW (1

sec)Vsr690 v, Ui1kv ,impulse voltage12 kv with following type of relay and accessories.(1) Manual Draw out type (MDO) with

one Lac Sixty one Thousand Five Hundred

260 3.00 following type of relay system (B) with microprocessor Release with over load, short circuit, earth fault protection and 161515.16 Ea

Fifteen And Paise Sixteen Only.

metering display in modular design with LED display and Test Trip button facility, CTs and auxiliary contacts, of following

current ratings. (iii) 1250Amp 50 kA Cat III

Providing & erecting additional parts for Air Circuit Breakers as follows: (A) Auxiliary Contact Block for CN-CS 800 to 2500 & 2 one Thousand Six Hundred Seventy And

NO + 2 NC Paise Fifty Four Only.

Providing & erecting additional parts for Air Circuit Breakers as follows:(C) Arc Chutes for 800 / 1000 / 1250 / 1600 A ACBs two Thousand Six Hundred Eleven And Paise

Eighty Six Only.

Providing & erecting additional parts for Air Circuit Breakers as follows: (H) Shunt Release Type EA1 : 240V AC two Thousand Fifty Five And Paise Thirty

Providing & erecting additional parts for Air Circuit Breakers as follows: (I) Under Voltage Release Type MV(2) : 240V AC, 415 two Thousand Eight Hundred Ninety Three

V AC And Paise Sixty Five Only.

Providing & erecting additional parts for Air Circuit Breakers as follows: (K) Earth Fault Release Type EF 2 (30%, 40%, 50% ) two Thousand one Hundred Fourteen And

Paise Ninety Four Only.

Providing & erecting additional parts for Air Circuit Breakers as follows: (M) CTs for 800 C / 1000 C with 400A / 640A and 800A two Thousand Seven Hundred Eighty two

taps for Fixed & Drawout Type ACBs And Paise Fifty Five Only.

Providing & erecting additional parts for Air Circuit Breakers as follows: (N) CTs for 1250 C / 1600 C for Fixed & Drawout Type two Thousand Nine Hundred Fifty Three

ACBs And Paise Twenty Four Only.

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating

one Lac Eleven Thousand two Hundred

268 1.00 mechanism A.C.23 duty confirming to IS for 111271.70 Ea

Seventy one And Paise Seventy Only.

(J) 1250 A Cat. III

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth

Fourteen Thousand Nine Hundred two And

269 20.00 bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and 14902.55 SMT

Paise Fifty Five Only.

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size (B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory (i) with 350mm depth

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth

Forty Thousand Nine Hundred Ninety Nine

270 8.00 bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and 40999.94 SMT

And Paise Ninety Four Only.

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size (B) The standard companies switch gear shall be used

and only manufacturers at CPRI approved factory(iv) with 1000 mm. depth

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding &

Seventy Seven And Paise Seventy Seven

271 220.00 finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge 77.77 Kg.

with necessary grouting, cementing, plastering & finishing

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power,

Average voltage Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance

current, Power factor and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent

Fourteen Thousand One Hundred Twenty

272 6.00 energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current 14123.84 Ea

Three And Paise Eighty Four Only.

Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC

45...65 Hz, 40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with

273 6.00 43.43 Forty Three And Paise Forty Three Only. Ea

necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing Two Hundred Seventy Four And Paise

CRCA box duly secured with insulating materials connected to the meter. Seventy Two Only.

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of

moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal Six Thousand Fifty Six And Paise Ninety

connections & complete erected in existing M.S.housing.. Seven Only.

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine

with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in

24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and

lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with

adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts

electric starting equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring,

pressure gauge, starter etc and heavy duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable

of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

1968 with voltage regulation +/- 5% of rated voltage from no load to full load.

Forty Lac Fifty Eight Thousand Three

Hundred Sixty One And Paise Eighty Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and Forty Lac Fifty Eight Thousand Three

alternator both connected to Each other by flexible flange coupling and with floor/wall mounted control panel box Hundred Sixty One And Paise Eighty Only.

comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired

with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity armoured cable and

complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of

density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered

from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per

PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of continous running capacity on full load .

Erection, commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of fuel

tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary

certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below.

(As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel

System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .)

(V) Continuous rating of 500 KVA ,BHP not less than 600 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel

generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator

contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air

circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push

buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. Four Lac Forty Three Thousand Three

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V Hundred Twenty And Paise Thirty one Only.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(G) AMF Control Panel for 500 KVA 3 phase DG Set

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for

278 15.00 69.69 Sixty Nine And Paise Sixty Nine Only. Each

MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

279 500.00 25.25 Twenty Five And Paise Twenty Five Only. Each

connections as per site situation directed by Engineer In charge.

(7) Blank Plate Single

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

280 50.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 106.05 one Hundred Six And Paise Five Only. Mtr.

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

one Hundred Twenty Eight And Paise

281 120.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 128.27 Mtr.

Twenty Seven Only.

(C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

two Hundred Sixty Four And Paise Sixty two

282 150.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 264.62 Mtr.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Three Hundred Forty one And Paise Thirty

283 200.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 341.38 Mtr.

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Six Hundred Forty Eight And Paise Forty two

284 150.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 648.42 Mtr.

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

one Thousand Four Hundred one And Paise

285 150.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 1401.88 Mtr.

Eighty Eight Only.

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

two Thousand Ninety Six And Paise Seventy

286 210.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 2096.76 Mtr.

(K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

one Hundred Forty And Paise Thirty Nine

287 70.00 be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 140.39 Mtr.

(A) 4 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

288 450.00 be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 151.50 one Hundred Fifty one And Paise Fifty Only. Mtr.

(B) 4 core 6 Sq. mm

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to

one Hundred Sixty Eight And Paise Sixty

289 80.00 be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 168.67 Mtr.

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe of one Hundred Eighty Four And Paise Eighty

following size of cables Three Only.

(A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

Three Hundred Fifty Nine And Paise Fifty Six

291 50.00 with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. 359.56 Mtr.

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

Four Hundred Ninety Four And Paise Ninety

292 50.00 with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. 494.90 Mtr.

(C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Four Hundred Fifty Five And Paise Fifty one

(B) 4 core 4 Sq. mm Only.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Six Hundred Thirty Seven And Paise Thirty

(C) 4 core 6 Sq. mm one Only.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Eight Hundred Forty Six And Paise Thirty

(A) 4 core 10 Sq. mm Eight Only.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

296 70.00 complete with out going tails, insulating tape etc for following size of cables. 33.33 Thirty Three And Paise Thirty Three Only. Ea

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

297 50.00 complete with out going tails, insulating tape etc for following size of cables. 38.38 Thirty Eight And Paise Thirty Eight Only. Ea

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

298 10.00 complete with out going tails, insulating tape etc for following size of cables. 38.38 Thirty Eight And Paise Thirty Eight Only. Ea

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

299 4.00 complete with out going tails, insulating tape etc for following size of cables. 47.47 Forty Seven And Paise Forty Seven Only. Ea

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

300 14.00 75.75 Seventy Five And Paise Seventy Five Only. Ea

(B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. one Hundred Forty And Paise Thirty Nine

(E) 3 & 1/2 core 120 Sq. mm Only.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. two Hundred Forty Seven And Paise Forty

(H) 3 & 1/2 core 240 Sq. mm Five Only.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Three Hundred Sixty Nine And Paise Sixty Six

(J) 3 & 1/2 core 400 Sq. mm Only.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

304 80.00 6.06 Six And Paise Six Only. Each

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

305 8.00 13.13 Thirteen And Paise Thirteen Only. Each

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

306 16.00 15.15 Fifteen And Paise Fifteen Only. Each

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

307 56.00 20.20 Twenty And Paise Twenty Only. Each

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

308 16.00 45.45 Forty Five And Paise Forty Five Only. Each

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

309 16.00 85.85 Eighty Five And Paise Eighty Five Only. Each

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

310 40.00 110.09 one Hundred Ten And Paise Nine Only. Each

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

311 360.00 8.08 Eight And Paise Eight Only. Each

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

312 32.00 10.10 Ten And Paise Ten Only. Each

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, withchamber and heavy

duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Eight Thousand Six Hundred Thirty Six And

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:-< 1 volt at no load & dry form, Sulphar Paise Fifty one Only.

content:-<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)

i.e independent Earthing in normal soilLength of Pipe : 3.00 mtrsBack filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Seven Hundred Ninety Four And Paise Eighty

Motors etc. using copper clamp. Seven Only.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel Seventy Seven And Paise Seventy Seven

board, Motors etc. using proper clamp. Only.

Providing and erecting Annealed bare Copper Seven Hundred Ninety Four And Paise Eighty

wire 8 to 16 SWG. Seven Only.

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with

two Thousand Five Hundred Thirty Four And

317 30.00 height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as 2534.09 Each

Paise Nine Only.

Providing & erecting Approved make Ceiling Fan with double ball bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep

one Thousand Nine Hundred Eighty two And

318 175.00 complete having 3 Aluminium blades, canopy erected complete. [ Make shall be approved by Engineer in Charge] 1982.63 Ea

Paise Sixty Three Only.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with

one Thousand Nine Hundred Forty Eight

319 180.00 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 1948.29 Ea

And Paise Twenty Nine Only.

cm. down rod erected with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for

320 355.00 108.07 one Hundred Eight And Paise Seven Only. Mtr.

fan complete with proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm

321 355.00 M.S. round bar bounded to the RCC bars up to 50mm length Each side and pierced through a 108.07 one Hundred Eight And Paise Seven Only. Ea

16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet

322 355.00 18.18 Eighteen And Paise Eighteen Only. Each

to cover the fan hook or Fan box.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers &

one Thousand Seven Hundred Three And

323 21.00 square frame. 1703.87 Ea

Paise Eighty Seven Only.

200mm with 1350RPM Cat.II

Providing recess in wall or window frame suitable for erection of Exhaust fan complete with plastering and colour

one Hundred Eighty Nine And Paise Eighty

324 21.00 washing to match the colour of the wall or window complete with expanded metal in order to render the fitting in 189.88 Ea

accessible and the room water-proof.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting Five Hundred Thirty Five And Paise Thirty

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity Only.

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >

(A) LED Lamps integral type, with PC diffuser

326 100.00 112.11 one Hundred Twelve And Paise Eleven Only. Ea

suitable LAMP holder

(ii) 5 to 8 watts cat III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, one Thousand Seven Hundred Ninety Four

Luminaire efficacy> 85 lumens/watt , And Paise Seventy Seven Only.

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Panel Light with provision

for Plane front frame with translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Five Hundred Eighty Nine And Paise Eighty

328 1780.00 Luminaire efficacy> 85 lumens/watt , 589.84 Ea

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips

(iii) 16-20 watts, Surge-2 KV cat - III

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of

45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler should be comprising of

Sixty one Thousand Four Hundred Eighty

329 7.00 hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay 61482.74 Each

two And Paise Seventy Four Only.

etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame,

prefilter housing carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH

capacity & erected as directed

[G] 1000 LPH with 3 phase Raw water pump of 1700LPH @ 3.0 kg/cm2 (1No - Kirloskar/CRI/Lubi), Dual media filter 13"x54" -

two Lac Seventeen Thousand two Hundred

330 1.00 No, Micron catridge filter 20" x 4.0" - (1No), High pressure pump 1000LPH @ 11kg/cm2 - (1No - Kirloskar/CRI/Lubi), RO 217236.86 Each

Thirty Six And Paise Eighty Six Only.

Membrane housing with RO membrane of 40*40 -(4 Nos), RO pressure tube 4" x 2E-(2Nos), 0 - 2400LPH Rotameter ( 2 Nos).

Dosing pump 0 -6 LPH (1 No) with 100 Ltr Dosing tank - (1 No.), Recovery Rate 50%.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x

Six Thousand Five Hundred Ninety one And

331 10.00 6 mm M.S. Flat with nut & bolts grouted in wall complete. 6591.26 Ea

Paise Twenty Six Only.

[A] For 4.5 Kg Capacity

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp Eight Hundred Forty Eight And Paise Forty

for erection on wall Only.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete

333 270.00 2546.00 Two Thousand Five Hundred Forty Six Only. Ea

with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having

334 150.00 two LED, metallic cover complete with all connections 260.00 Two Hundred Sixty Only. Each

etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

335 21.00 2911.00 Two Thousand Nine Hundred Eleven Only. Ea

Supplying, installation, testing & commissioning of addressable manual call point Three Thousand Four Hundred Forty Four

complete as required. Only.

Supplying, installation, testing & commissioning of addressable horn cum strobe Three Thousand One Hundred Twenty One

complete as required. Only.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having

338 1420.00 XLPE insulation, steel wire armouring & FRLS/HFFR 163.00 One Hundred Sixty Three Only. Mtr.

outer sheath complete as required

Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with

Ninety Six Thousand Three Hundred Eighty

339 7.00 inbuilt reset, acknowledge and silence switches 96385.00 Each

complete as required.

SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant

with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have expandable capacity upto 4 loops. The

Panel must have large graphic display. The Panel must also have the capability to take Addressable Intelligent Wired and

two Lac Twenty Three Thousand Four

340 1.00 Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base 223401.90 Ea

Hundred one And Paise Ninety Only.

sounders/Base Sounder Beacons. The Panel shall have 240 V AC power supply along with automatic Battery Charger.

Approved by LPCB

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel

conduit of following pairs, cores and size including connections and interconnections etc. as required.

341 415.00 52.00 Fifty Two Only. Mtr.

speaker cable Single pair, 2-core, 1.5 sqmm

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP4 player (including 6 zone

One Lac Eleven Thousand Nine Hundred

342 1.00 button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as 111962.00 Ea

Sixty Two Only.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete

343 45.00 869.00 Eight Hundred Sixty Nine Only. Ea

Supplying & erecting dual channel amplifier

,power handling capacity of 180 watt ,four micro phone inputs with independent level control ,built in FM

Eleven Thousand one Hundred Twenty Eight

344 2.00 tuner,with preset memories,USB drive & SD card for MP3 playback ,100v /telephone input with priority and 11128.18 Ea

And Paise Eighteen Only.

VOX,frequency response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated power up to 50 units

[[Approved by Competent Authority i.e. NOt Below the rank of Executive Engineer ]

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-

boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with Twenty Lac Seventeen Thousand Seven

345 1.00 battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC 2017755.78 Hundred Fifty Five And Paise Seventy Eight Ea

sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload Only.

capacity for momentary load.

[N]80 KVA 3 - phase with 1Hr Backup

S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or more having three phase motor capacity not more than

H.P. with following capacity . Lifting and Lowering taken extra. Thirty Nine Thousand one Hundred Forty

(A) (12 stage) 280 to 240 LPM discharge at 90 to 104 mtrs. head respectively suitable for 50mm dia. delivery pipe cat III Nine And Paise Sixty two Only.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of

Four Hundred Eighty Eight And Paise Eighty

347 120.00 following Size. 488.84 Mtr.

(F) 3 Core x 16 Sq. mm.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible

Eleven Thousand Eight Hundred Seven And

348 1.00 [B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ 25 mtr head suitable for 50 mm dia 11807.91 Each

Paise Ninety one Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible

Seventeen Thousand two Hundred Seventy

349 1.00 [C] For 3 HP 3 phase open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head 17279.08 Each

Nine And Paise Eight Only.

suitable for 50/65 mm dia delivery pipe

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible

Twenty Thousand Six Hundred Twenty one

350 1.00 [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr 20621.17 Each

And Paise Seventeen Only.

head suitable for 50/65 mm dia delivery pipe

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per instruction of Engineer in

two Thousand Three Hundred Fifty Five And

351 3.00 charge on site complete with wiring connection with existing wires , with copper conductor from pump to upper and lower 2355.32 Each

Paise Thirty two Only.

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single phasing

preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage Eight Thousand Eight Hundred Ninety Nine

limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high And Paise Eleven Only.

voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be

erected on angle iron frame. Grouted on wall the contactors will be of approved make only)

(B) DOL for 7.5 H.P.

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

Seven Thousand Five Hundred Sixty one And

353 20.00 terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by 7561.87 Ea

Paise Eighty Seven Only.

manufacturer considering site requirement.

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with

Five Hundred Sixty one And Paise Fifty Six

354 20.00 suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted 561.56 Ea

with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- Four Thousand two Hundred Forty Eight

79 & LM-80 certificates)(NOTE: Below And Paise Six Only.

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(ii) above 48 to 60 Watts Cat-lll

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with suitable brass studs with nuts, one Hundred Forty Six And Paise Forty Five

washers and clamps of size 25mm x 3mm suitable for pole painted with one coat of red lead paint. Only.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time Three Thousand one Hundred Sixty Eight

1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire And Paise Thirty Seven Only.

proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per

Eight Hundred Fifty Seven And Paise Forty

358 1.00 direction Cat III 857.49 Ea

(C) 4 pole 440V 16 Amp.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following

359 100.00 size to be erected as directed. 58.58 Fifty Eight And Paise Fifty Eight Only. Mtr.

(e) 1.50 Sq.mm 3 core round PVC sheathed

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site requirement. Pipe dia as following. two Hundred Forty Nine And Paise Forty

(C) 40 mm dia. Seven Only.

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For panel)

Nine Hundred Ninety Four And Paise Eighty

361 20.00 For using salt and charcoal / coke as required 994.85 Each

for pipe type earthing.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of

362 100.00 62.62 Sixty two And Paise Sixty two Only. RMT

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking capacity 10 KA to be two Hundred Ninety Seven And Paise Ninety

erected in existing box. confirming to IS 8828/1996 with ISI Mark Five Only.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable

364 380.00 or locating the fault all over the run and back filling the same and making the surface as normal ground. 74.74 Seventy Four And Paise Seventy Four Only. Mtr.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back

365 40.00 55.55 Fifty Five And Paise Fifty Five Only. Mtr.

filling the same and making the surface as normal ground.

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray

should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - two Hundred Seventy Four And Paise

bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..(2) 100 X Seventy two Only.

50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray

should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - Three Hundred Twenty two And Paise

bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (3) 150 X Nineteen Only.

50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray

should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - Four Hundred Seventy one And Paise Sixty

bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..(5) 300 X Seven Only.

50 X 1.5 mm Thick

Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features

etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live

& recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night

condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance

Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto

50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto

Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3)

Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:-

WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple

streaming , configurable Main stream: 4MP (2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web Eight Thousand Seven Hundred Eighty Four

browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Only.

Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering,

HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB.

It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage

management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection;

IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4,

DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS,20) IR life: 4MP @

25/30fps@1440P (2560 x 1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site requirement).

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and

features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date &

Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night

condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance

Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance

upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to

1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone

Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A,

G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6)

Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams

minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable

through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES Eight Thousand Five Hundred Twenty Eight

256-bit Encryption, Configuration encryption, Only.

trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9)

Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied

with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to

NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection;

memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP,

HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 4MP @ 25/30fps@1440P (2560 x 1440)

Outdoor Bullet Camera with 2.8/ 3.6/6/8/12

mm fixed lens (as per site requirement)

Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera

licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder

Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and

simultaneously Multi-channel playback of all IP camera or more and must be ONVIF with minimum support of 384 Mbps

incoming Bandwidth. 2) NVR should support video compressions : H.265 or better, H.264, MJPEG. 3) Must support

channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions. 4)

Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 8 SATA

Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10. 6) Connectivity Interface : 2 Nos. x

10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port 7) Backup Interface : Its should have 4 Nosx

USB port (2x USB3.0, 2xUSB2.0) 8) Video Output Ports: 2x HDMI and 2 VGA 9) Alarm Ports: It should have 16/8 Ch In/

Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 10) Email & SMS Altert

371 1.00 options: Option for SMS/ Email Alerts to minimum 5 70000.00 Seventy Thousand Only. Each

designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic

11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols:

HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast,

Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP

need. 13) Standards: CE, FCC, RoHS, BIS Certified 14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing)

16) The VMS application shall support all the features & functionalities of the offered 64 Channel Network Video

Recorder (NVR) having display split :- Main screen:

SITC of SCREEN SIZE 105.41 cm diagonal (42” INCH), RESOLUTION FHD (1920*1080), USB INPUT (2.0

SUPPORT) 2*Side(USB2.0), HDMI INPUT 2*Side(HDMI 1.4), USB DEVICE SUPPORT USB Supported HDD,

Seventy Eight Thousand Eight Hundred

372 2.00 HOTEL MODE Yes, Basic, BLUETOOTH Yes (Ver. 4.1), WIFI TYPE(STANDARD) 802.11a/b/g/n 2.4G 2T2R, 78882.71 Each

Eighty two And Paise Seventy one Only.

Built-in, WIFI BAND TYPE 2.4GHz, OS & VERSION INFO Android 'P' - 9.0, MEMORY FLASH 8GB EMMC,

RAM 1.5.0GB , DDR3 2133Mhz. (Including Five year free maintenance with guarantee)

Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label

holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for Four Thousand Four Hundred Seventy Three

compliance Only.

with ANSI/TIA-568.2-D etc. complete as required.

Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper

management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations,

Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for900μm tight

Eight Thousand Five Hundred Seventeen

374 3.00 buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and 8517.00 Each

rear covers formbetter access to interior of LIU, Should be Single /Multi mode LC Type fully loaded. Accessory kit

consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. 24 Port LIU

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program

375 64.00 certificate for compliance with ANSI/TIA-568.2-D etc. 128.00 One Hundred Twenty Eight Only. Each

complete as required. Copper Patch Cords of length 1m (3ft)

SITC of 48 x 10/100/1000BASE-T ports 4 x Gigabit GbE/SFP combo ports Advanced L2 switching and security features

L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface Thirty Thousand Three Hundred Ninety

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Eight And Paise Ninety Eight Only.

Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto

256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-

377 1.00 21016.00 Twenty One Thousand Sixteen Only. Each

003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications. 10TB (Terabytes)

Supplying and fixing of following size Wall Mount Rack having Fixed Structure with

0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with

'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened

Seven Thousand Five Hundred Ninety Four

378 2.00 Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 7594.00 Each

16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc.

complete as required. 9U Rack

Supplying and fixing of following size Wall Mount Rack having Fixed Structure with

0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with

'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened

Eleven Thousand Two Hundred Ninety

379 1.00 Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 11297.00 Each

16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc.

complete as required. 15U Rack

(a) General Features & Special Features of the all lift items shall be taken as below.

(d) The Rates of the following items are for the lift of Machine room less. For Machine room Lifts, rate for Rs. 1,50,000/- shall

be deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total Cost for the Lifts

15 and above passenger capacity as extra cost.

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous

motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector control drive with

encoder feedback closed loop system shall be used for lift car and door operation which shall be full collective selective

operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay

and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of

fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic

appearance with LED ceiling lights. Car flooring shall be of s/s 304 chaker plate design sugeested of engineer in charge. of

engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic

doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/

attended mode. All car panel buttons and all floor switches must be with brail language as per lift act.

"[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light

& Fan should start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

"[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD

eliminator in circuit for lift machine room and lift well with proper numbers of light points, with fixtures, exhaust fan and

plug points shall be provided by the agency. Only 3 phase Power Supply shall be made available by department in lift

machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift shall be

made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are not in lift agency’s

[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission

from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift car"

"[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection and provide

report by third party authorized by concern licensing authority 5.agency has to provide third party insurance upto

completion of free maintenance period and submit the document for the same."

"[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view

from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at

appropriate height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating voltage controlled Stabilizer

suitable for your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)"

"2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car

with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors, All landing doors

must have fire rating up to 2 hours and car door must have multi-level crisscross beam door protection."

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator are equipped with

remote monitoring system.agency has to provide mobile app and user id and password for monitoring Twenty Eight Lac Thirty Six Thousand one

DESCRIPTION OF LIFT : Hundred Ten And Paise Thirty Only.

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:

15/16 Passengers,. Ground plus 8 upper floors with Rated Speed of 1.5 /1.75 m/sec.,

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

26 passengers . Ground plus 8 upper floors with Rated Speed of 1.5 / 1.75 m/sec with micro price/PLC control and ACVVVF.

Thirty Eight Lac Thirty Six Thousand Nine

381 1 drive 3836902.13 Each

Hundred two And Paise Thirteen Only.

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Providing, erecting, testing & commissioning approved make oil immersed ONAN cooled, double wound, core type indoor /

outdoor copper wound 11KV/ 433V step down transformer of following capacities operating on 3 phase, 50 Hz 4 wire &

neutral earthed system continuously rated for a full temperature rise in oil not exceeding 45 Deg.C.at maximum ambient

temp. of 50 Deg. C. complete with necessary radiator first filling of new transformer oil & standard fitting as below complying

with IS 1180( Part 1 ):2014 standards with energy efficiency level

On load tap changing range steps +2.5% to -5% on H.V for variation should be provided. The H.V. shall be connected Delta &

Secondary with star connection. The transformer should have cable-end boxes on H.T. side suitable for up to 3 core

sq.mm. XLPE cable & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from

1. Oil conservator with filling Hole & Cap - One No.

2. Thermometer pocket with 6" dial type thermometer switch alarm & trip contacts- Two nos.

3. Silica-gel breather with charge- One No.

4. Plain oil level gauge - One No.

382 5. Drain / Sampling / Filter valve- One No.

6. Top Filter Valve - One No.

7. Explosion vent with Diaphragm - One No.

8. Rating & Diagram plate - One No.

9. Additional neutral bushing for earthing - One No.

10. Bi directional Roller - Four Nos.

11. Earthing terminals - Two Nos.

12. Lifting lugs - Two Nos.

13. Air release plug. - One No.

14. Double float buchholz relay with Alarm and trip contacts.

15. Control cable as required from Transformer to VCB Panel is to be provided with necessary connection to VCB relays for

as per IS 1180 level-1

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Seventeen Lac Fifty Five Thousand Nine

1 Max. allowable loses at 50 % of rated load is 2.287 KW and at full load is 6.402KW 1755935.50 Each

Hundred Thirty Five And Paise Fifty Only.

Filling the necessary application to Supply Co,Following up and getting the supplu filling the necessary Test report to the

Twenty one Thousand Six Hundred Twelve

383 1 Supply Co.All Official/statutory fess shall be paid by clients. (DG, transformer, high rise permission, electrical licening work 21612.29 Each

And Paise Twenty Nine Only.

Providing and erecting sandwitched type bus duct having following specification : Sandwich type busbar for use as Feeder

Busbar for interconnection between separate electrical equipment/ load centers, and for use as Plug in busbar risers.

The busbar shall be suitable for operation in a 690V / 1000 V system with frequency of 50 Hz .System can be either earthed or

unearthed. Impulse voltage should be 12 KV. Standards:

The busbar shall be designed and manufactured in accordance with the following international standards for busbar trunking.

-IS 8623/ 1993 Part I & II : Particular requirements of busbar trunking System

-IEC 61439 Part I & VI : Particular requirements of busbar trunking System

-IEC- 60529 : Degree of protection TESTING

The busbars shall be type tested at a reputable national / International test laboratory (ASTA or CPRI) for short circuit

withstand. The test shall be for a minimum duration of one second.

• Degree of ingress protection (IP rating) shall also be tested at any reputed independent laboratory. This test shall be for IP

55 for Indoor and IP 65 for Outdoor application.

• Short circuit and Degree of protection type test reports will be submitted for vThe bsubars shall be of high conductivity

Copper of 99.9% pure ETP grade and high conductivity Aluminium of 99.59% pure 19501 grade.

Where as earth conductor is required, it shall be separate external earth conductor, of high conductivity aluminium. Cross

section of Earth Conductor shall be as per IEC

It should be possible to provide a 200% Neutral where specified.

Phase cross over box should have busbars crossing over Each other not cables.

The busbars shall be individually insulated with 2 layers of insulating film. Layers of POLYSTER material class ‘F’, 155ºC.

The housing shall be made of 1.6 mm electrogalvanised sheet steel, with an epoxy powder coated paint finish of RAL

grade. Alternatively Aluminum casing of 2.5mm may also be provided. The housings shall be profiled, to provide higher

strength and efficient heat dissipation. The width of the housings shall be same for all ratings of busbars, in order to provide

interchangeability of tap off boxes.

The joints between sections shall be made so as to provide flexibility during installation and expansion / contraction of busbar

during operation. The joints shall be of the single bolt type. The joint construction must have the following features.

a) Thermal expansion of Busbars at joint of at least 4 mm per joint.

b) The joint insulation must be of one piece moulded design and not have any cut edges which can absorb moisture.

c) Joint assembly shall be removable as separate sub-assembly so that it can be inserted or removed without disturbing the

adjacent sections.

d) The joint system must be designed in a way that the installer cannot insert the busduct length too far and damage the bolt

e) The busbars ends shall not have any holes or slots at the joints – the electrical continuity shall be through pressure plates,

achieving a high area of joint cross section and expansion capability.

a) Plug in boxes will be draw out type, contacts shall be silver plated and spring loaded.

b) The front operating handle will be interlocked with the plug-in boxes cover so that MCCB can be operated only with

suitable cover in close position.

c) The door shall be provided with the door knobs.

d) When the MCCB is in ‘ON’’ position, even with the door knobs unlocked, the operator should not be able to remove the

box or open the tap off location cover.

e) During insertion, the earth conductor shall make contact first before the phase conductors. This should follow the

sequence of first in last out concept.

f) When the box is open the live conductors shall be safe guarded by a transparent insulator plate which allows for visible

inspection but does not allow touching of the live conductors.

g) The tap off unit arrangement must achieve IP 54 without requiring any additional sealing at site.

h) The tap off boxes will be suitable for accommodating MCCBs or other accessories, as required. The tap off units should

allow the flexibility of accommodating different, reputed MCCB makes, to be mutually agreed depending on the tender

(B) Copper Bus (e)1600 Amp. capacity Thirty Nine Thousand one Hundred Eighty

one And Paise Ninety Four Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’-Section Girder, 4" x 2"channels, clamps, nuts, bolts

etc. Suitable for erection of the followings duly connected with necessary ACSR conductors. as per drawing approved by the

Engineer- in charge complete with following. Height as per IS 7 Mtr above ground )

(A) 11 KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.-Three nos

(B) 11 KV G.O.D. switch complete with insulators, operating handle with galvanised pipe, Sq.bar etc. 400 Amp.- One Set Ninety Eight Thousand Four Hundred Thirty

(C) 11 KV lightening arrestor with clamp- Three Nos. Three And Paise Fifty Nine Only.

(D) 11 KV shackle insulators- Six Nos.

(E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick double copper earth strips run separately and

connected with separate copper plate earth electrode.

Providing and erecting ISI Marked 3core 120 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS-7098 to one Thousand Five Hundred Forty two And

be laid on wall with clamps or in provided cable trench / pipe approved manner as directed. Paise Twenty Seven Only.

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable Fourteen Thousand Six Hundred Eleven And

for 11 KV XLPE cable 3core 95 & 120 Sq.mm (A) Outdoor type Paise Sixty Seven Only.

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable Eight Thousand Four And Paise Twenty Five

for 11 KV XLPE cable 3core 95 & 120 Sq.mm (B) Indoor type Only.

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of one Hundred Thirty And Paise Twenty Nine

person suffering from Electric shock with minimum 50" diagonally size. Only.

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. two Hundred Fourteen And Paise Twelve

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (c)12mm Three Thousand Eighty one And Paise Fifty

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage,

two Hundred Ninety Nine And Paise Ninety

392 2 medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) 299.97 Each

etc. (All above contents shall be of standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly

two Hundred Fourteen And Paise Twelve

393 8 painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on 214.12 Each

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm

Nine Hundred Forty two And Paise Thirty

394 2 height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly 942.33 Each

painted with one coat of red lead and two coats of approved enamelled silver paint.

Supplying & Fixing SMC Chequered plate having 7 mm thickness, made out of SMC Confirming to IS 13410 & by Hot press

Three Thousand Six Hundred Twenty Nine

395 10 Compression Moulding technique Suitable cut & fixed with MS Angle Frame to Fit Trench Widths as per site requirement 3629.94 SMT.

And Paise Ninety Four Only.

approved .by engineer incharge

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should

be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer Switch of

MCCB type IcuIcs50KA at 400/440 Volts, with OC, SC, internal earth fault protection Incomer Switch of MCCB type IcuIcs50KA

at 400/440 Volts, with OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor

type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Reactor for Each Seven Lac Eighteen Thousand Nine Hundred

capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCB with Sc, OL, internal Eighty Five And Paise Sixty Seven Only.

earth fault relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps

with LCD display, Rs 485 Communication port, Indication LED Lamps for main incomer and ON-OFF for Each capacitor

bank,MS Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel (g)250KVAR

Providing, erecting, testing commissioning & getting Plan Approval as well as NOC from Electrical Inspector for extensible H.T

panel comprising of one 400A. H.T. VCB incoming & Two outgoing 400 A Drawout type VCB confirming as per I.S. for use on

11 KV, 3 phase, 50 c/s. unearthed A.C. supply system having breaking rupturing capacity of 350 MVA complete with spring

operated mechanism, mechanically & automatic ON-OFF and spring mechanism charged, discharged indicators, ON-OFF

mechanical push button, operation counter necessary auxiliary switches, closing shunt trip, air insulated busbar chamber

having heat shrinkable PVC sleeves, mechanical interlocks safety shutters, isolating plugs and a VCB trolley with three vacuum

interrupters with epoxy support insulators and self aligning finger type isolating contacts. The breaker shall be Manual cum

motorised mechanism & auto spring charge with TNC switch closing with following accessories.

Thirteen Lac Twenty Eight Thousand Eight

Hundred Thirty Six And Paise Eighty Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

1. 144 mm. square flush mounting type digital multifunctional meter with communication facility - Three sets. 2. Power

Factor Meter One No 3. Double core current transformer cast resin type having ratio 200 to 50/1 core for metering & second

core for protection having required class of accuracy. - Three Sets 4. Instantaneous under voltage relay& Temperature rise Thirteen Lac Twenty Eight Thousand Eight

Tripping Relay 5. Electrical closing coil & short trip coil operating on 110V. D.C.- Three Sets 6. Auxiliary relay for anti pumping Hundred Thirty Six And Paise Eighty Only.

device 7. Three phase Three limb Drawout type feeder connected & output of 200 VA cast resin insulated potential

transformer having ratio 12000V./110V. and 200 VA Burdon with 0.5 accuracy. - One No. 8. Common Alarm bell operating on

110V A.C.- One No. 9. Digital KWH Meter - One No. 10. Cable boxes suitable up to 11 KV 3core 150 sq.mm XLPE cable. -

Three Nos 11. 230V. A.C. to 110V. D.C. power pack for closing & tripping circuit common. 12.Breaker ON-OFF, Auto trip and

spring charged indicators. - Three Sets. 13.Phase indicating & panel illumination lamps with plug socket - Three Sets.

14.Numerical Communicable type non directional O/C & E/F Relay with a setting of 5-250% both in O/C & E/F. -Three Set

complete with necessary interconnection with air insulated high grade copper busbar {Breaker Testing scope include Closing

Time, Opening Time, VCB Hi-Pot test at Site}{ Relay Testing Scope Include testing of all protection by three phase testing kit at

site }(VCB Trolley is to be provided)

Air Terminal SITC of 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in air termination and down

conductor system . Cross sectional area of conductor should be 50 mm². Test Parameter: a.Lightning impulse current of two Hundred Twenty Eight And Paise Fifty

100kA for 10/350 µs b.Electrical resistivity - 0.036 µ?m, Tensile strength - 120 to 240 MPa or N/mm², Salt spray - No Sign of Three Only.

Corrosion. Tested as per IEC 62561-2.

SITC of UV resistance Nylon/PU Conductor Holder for Parapet wall for holding 8 mm dia Aluminium alloy round Conductor .

399 60 71.04 Seventy one And Paise Four Only. Each

SITC of UV resistance Nylon/PU roof conductor holder for flat roof with concrete block for fixing 8 mm dia Aluminium alloy one Hundred Forty And Paise Thirty Seven

Solid Round Conductor in the terrace flat surface at every 1 mtr. Only.

SITC of Stainless Steel Folded clamp/Metal roof holder for 8-10 mm dia Aluminium alloy Solid Round Conductor for horizontal

401 40 Air terminal above metal sheet with fixing screws . Test Parameter: Salt Spray Test ( IEC 62561-1) - No sign of Corrosion 310.70 Three Hundred Ten And Paise Seventy Only. Each

SITC of Adhesion glue for fixing matel roof conducter holder over the flat surface to meet the requirment of IS/IEC - 62305 . Three Thousand Eight Hundred Eight And

Paise Ninety Only.

SITC of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor & 10 mm Copper bonded conductor at Seven Hundred Ninety Six And Paise two

cross junction. Test Parameter Salt Spray Test ( IEC 62561-1) - No sign of Corrosion Only.

SITC of Expansion Piece with connector to compensate the expansion and contraction of Solid Round Al. Conductor during

temperature variations.Expansion piece should be consider at every 20 mtr length of straight horizontal air termination and Three Hundred Forty Eight And Paise Thirty

connected at both the end with use of straight connector conductor . Test Parameter: Electrical Resistivity Test-0.036 µ?m Six Only.

Salt Spray Test - No Sign of Corrosion Tested as per IEC 62561-1

SITC of Aluminium Straight conductor connector for interconnecting 8mm Aluminium conductor to meets the requirement of

405 18 89.87 Eighty Nine And Paise Eighty Seven Only. Each

IS/IEC 62305.Tested for Electrical , Mechanical and chemical as per IEC

SITC of air termination rod of 2 mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered

Type). The rod shall be mounted with supporting stone and fixing accessories. Test Parameter: Mechanical Load Test for Ten Thousand Eighty one And Paise

individual aluminium alloy rods - 120 to 280 N/mm² Salt Spray Test-No sign of corrosion Tested as per IEC 62561-1&2 Seventeen Only.

SITC of air termination rod of 4 mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered

Type). The rod shall be mounted with supporting stone and fixing accessories. Test Parameter: Mechanical Load Test for Ten Thousand Eighty one And Paise

individual aluminium alloy rods - 120 to 280 N/mm² Salt Spray Test-No sign of corrosion Tested as per IEC 62561-1&2 Seventeen Only.

SITC of air termination rod of 3mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered

Type). The rod shall be mounted with stainless steel wall clamp and fixing accessories . Test Parameter: Mechanical Load Test Six Thousand Three Hundred Sixteen And

for individual aluminium alloy rods - 120 to 280 N/mm² Salt Spray Test-No sign of corrosion Tested as per IEC 62561-1&2 Paise Seventy Eight Only.

Down Conductor SITC of 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in down conductor system

. Cross sectional area of conductor should be 50 mm². Test Parameter: a.Lightning impulse current of 100kA for 10/350 µs two Hundred Twenty Eight And Paise Fifty

b.Electrical resistivity - 0.036 µ?m, Tensile strength - 120 to 240 MPa or N/mm², Salt spray - No Sign of Corrosion. Tested as Three Only.

per IEC 62561-2.

SITC of Parapet conductor holder for fixing 8mm Aluminium conductor on the parapet surface to meet the requirement of

410 30 71.04 Seventy one And Paise Four Only. Each

SITC of Aluminium Straight conductor connector for interconnecting 8mm Aluminium conductor to meets the requirement of

411 18 89.87 Eighty Nine And Paise Eighty Seven Only. Each

IS/IEC 62305.Tested for Electrical , Mechanical and chemical as per IEC

SITC of Lightning counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons

Fifty Nine Thousand Four Hundred Eight

412 1 enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, Complies with IEC/EN 59408.54 Each

And Paise Fifty Four Only.

SITC of Stainless Steel Test Joint with enclosure to interconnect between 8 mm Al. round conductor to 10 mm copper

one Thousand Six Hundred Twenty Nine

413 6 bonded round conductor Test Parameter: Salt Spray Test for test joint plate -No sign of Corrosion Tested as per IEC 62561-1 1629.69 Each

And Paise Sixty Nine Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

SITC of Rust resistant non corossive 10 mm dia Copper bonded round conductor used for Earth termination inside the

concrete and soil. Test parameter: Short circuit current test for copper bonded conductor:Test 6 kA ratings, as per cross

414 25 sectional area for 1 sec(IS3043/IEEE80); Electrical Resistivity before & after salt mist spray test: 0.25µOm max. Tensile Test 290 650.51 Six Hundred Fifty And Paise Fifty one Only. Mtr.

to 510 N/mm². Adhesion no peel or crack & Bend test no seperation of Cu, Cu Coating thickness min. 70µm. Tested as per IEC

SITC of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor & 10 mm Copper bonded conductor at Seven Hundred Forty Five And Paise Fifty

cross junction. Test Parameter Salt Spray Test ( IEC 62561-1) - No sign of Corrosion two Only.

SITC of OEM make Connecting Point Test Parameter Salt Spray Test ( IEC 62561-1) - No sign of Corrosion Three Hundred Sixty Eight And Paise Five

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s),

microprocessor based Controller, top discharge type condensing unit(s), with R410 A Refrigerant (Or Eco Friendly

Green Gas if any), vibration isolators, with suitable foundation, MS Stand for Unit with necessary paint etc. complete as

required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature Twenty Four Thousand Four Hundred Fifty

without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit Six And Paise Fourteen Only.

shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less

than 3.1 and IEER not less than 6.5. (Design should be got approval before execution from

engineer in charge) 12 HP (Ground Floor)

(4 Units of 26 HP Module) (First Floor: Microbiology Labs) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

12 HP Module (First Floor: Microbiology Offices) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

(3 Units of 24 HP Module (First Floor: Food Microbiology Labs) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

(24 HP + 26HP Module) (Second Floor) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

(24 HP + 24 HP Module) (Third Floor) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

(28HP + 26 HP Module) (Fourth Floor) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

(28HP + 26 HP Module) (Fifth Floor) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

(16 HP + 12 HP Module) (Sixth Floor) Twenty Four Thousand Four Hundred Fifty

Six And Paise Fourteen Only.

Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer

cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

Thirty Thousand one Hundred Sixty one

426 34 single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit 30161.63 Each

And Paise Sixty Three Only.

shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of

indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible

for Remote Operation System (B) 1 TR

(C) 1.2 TR Thirty Thousand Five Hundred Seventy Six

And Paise Seventy Four Only.

(D) 1.6 TR Thirty one Thousand Four Hundred Nine

And Paise Ninety Nine Only.

(E) 2 TR Thirty one Thousand Nine Hundred Ten And

Paise Ninety Five Only.

(F) 2.4 TR Thirty two Thousand Five Hundred Eighty

Eight And Paise Sixty Six Only.

(G) 2.8 TR Thirty Three Thousand one Hundred Thirty

two And Paise Four Only.

(H) 3.2 TR Thirty Three Thousand Eight Hundred Forty

two And Paise Seven Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type

horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness

0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by

injection moulding machine, complete with blower section with blower suitable for static pressure as required,

minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tubes thickness not

less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air

Five Lac Eighty one Thousand Six Hundred

433 2 prefilters, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase 581676.27 Each

Seventy Six And Paise Twenty Seven Only.

AC supply with suitable variable frequency drive control panel, drain connections, stainless steel (18G) drain pan with

PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.) and industrial type thermometers (2 nos.) at the inlet and

outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per

specification and of following capacities. (N) 20000 CFM

Add 10% for DX Type

434 113 SITC of COPPPER refrigerant distributionjoints REF NET joint (Indoor) 3030.00 Three Thousand Thirty Only. Each

Supply of Single Speed Smoke Spill Axial Fans with Class H, IP 55 motor for Exhaust air fan, fans should be suitable for Sixty Six Thousand Seven Hundred Sixty One

outdoor installation. (Normal speed the fan shall be able to deliver 17,000 cfm for Basement ) Only.

Supply of Dual Speed Smoke Spill Axial Fans with Class H, IP 55 motor for Exhaust air fan, fans should be suitable for outdoor

One Lac Fifty Three Thousand Five Hundred

436 1 installation. (Normal speed the fan shall be able to deliver 17,000 cfm and for Fire Mode 34,000CFM for Basement 1 & 2) 153520.00 Each

Supply and installation of Jet Fans for Basement 1 & Basement 2 Ventilation of 400mm dia Each.with dual speed . Forty Two Thousand Six Hundred Twenty

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes

of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring

type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with

Three Hundred Twenty Four And Paise

438 945 Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction 324.21 Mtr.

Twenty one Only.

and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (A) 6.4 mm dia (OD)

(Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

(B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Four Hundred Forty Four And Paise Forty

(C.) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

440 185 614.08 Six Hundred Fourteen And Paise Eight Only. Mtr.

(D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Seven Hundred Ninety Six And Paise Eighty

(E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Nine Hundred Forty And Paise Thirty one

(F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation one Thousand one Hundred Fifty Five And

Paise Forty Four Only.

(G) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation one Thousand Three Hundred Sixty two And

Paise Forty Nine Only.

Supply installation testing commissioning Shielded Shielded Control Cables for VRV System with necessary ISI mark Medium

one Hundred Forty Three And Paise Forty

445 50 class rigid PVC pipes with necessary accessories with termination in machine and control equipments..(A) 2C X 1.5 Sq mm 143.42 Mtr.

Shielded Armoured

446 2450 (C) 4C X 1.5 Sq mm Shielded Armoured 203.01 two Hundred Three And Paise one Only. Mtr.

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding &

Seventy Seven And Paise Seventy Seven

447 900 finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge 77.77 Kg.

with necessary grouting, cementing, plastering & finishing

(A) Cordless type remote control with thermostat, LED Display and internal wiring for Cassette, Seven Hundred Ninety Seven And Paise

FCU & CSU Ninety Only.

Supplying colourless non inflammable refrigerant Gas R-410 Nine Hundred Twenty Five And Paise

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting

complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings one Thousand Three Hundred Eight And

and specifications of following sheet thickness complete as required. (A) Thickness 0.63 mm sheet Paise Ninety Six Only.

(B) Thickness 0.80 mm sheet one Thousand Five Hundred Nineteen And

Paise Four Only.

Supplying, fixing testing commissioning of supply air diffuser of powder coated aluminium with aluminium volume control

Thirteen Thousand Six Hundred Eighty Eight

452 15 dampers with anti smudge ring & removable core and size & shape as per site requirement and approved design. 13688.53 SMT.

And Paise Fifty Three Only.

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)

Estimated But may Item of Works Unit to Estimated Quantites

Be More Or Less In Figures Rs.Ps. In Words Rs.Ps.

Supplying, fixing testing commissioning of Return air diffuser of powder coated aluminium without volume control

Nine Thousand Three Hundred Ninety Four

453 15 dampers with anti smudge ring & removable core and size & shape as per site requirement and approved design.. 9394.01 SMT.

And Paise one Only.

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber Eight Thousand Three Hundred Eighty And

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Paise Ninety Eight Only.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber

(Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with

Eight Hundred Seventy Seven And Paise

455 250 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.(A) 877.69 SMT.

Sixty Nine Only.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of

32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic

Eight Hundred Twenty Six And Paise

456 44 tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, 826.18 SMT.

stick pins, CPRX compound etc. complete as required and as per specifications.

Supply & Installation of Powder coated 0.5 Hepa Filter (600X600) as per Tender specification: Eight Thousand Five Hundred Eighty Five

458 2 Canvas Connections 3030.00 Three Thousand Thirty Only. Each

Medical Grade Copper Pipe : 42mm OD X 1.2mm thick two Thousand Nine Hundred Forty And

Paise Eleven Only.

Medical Grade Copper Pipe : 28mm OD X 0.9mm thick One Thousand Five Hundred Sixty Nine And

Paise Fifty Four Only.

Medical Grade Copper Pipe : 22mm OD X 0.9mm thick One Thousand Two Hundred Twenty Seven

And Paise Fifteen Only.

Medical Grade Copper Pipe : 15mm OD X 0.9mm thick One Thousand Eighty Nine And Paise

Seventy Nine Only.

Medical Grade Copper Pipe : 12mm OD X 0.7mm thick Six Hundred Fifty One And Paise Forty Five

Gas Outlet Points/ Terminal Unit : Oxygen with probe Seven Thousand One Hundred Eighty Nine

And Paise Eighteen Only.

Gas Outlet Points/ Terminal Unit : Nitrous Oxide with probe Seven Thousand One Hundred Eighty Nine

And Paise Eighteen Only.

Gas Outlet Points/ Terminal Unit : Air 4 bar with probe Seven Thousand One Hundred Eighty Nine

And Paise Eighteen Only.

Gas Outlet Points/ Terminal Unit : Vacuum with probe Seven Thousand One Hundred Eighty Nine

And Paise Eighteen Only.

Gas Outlet Points/ Terminal Unit : CO2 with probe Eleven Thousand Two Hundred Fifty Eight

And Paise Forty Seven Only.

Two gas Area Valve Service Unit Forty Seven Thousand Nine Hundred Sixty

Nine And Paise Ninety Five Only.

Three gas Area Valve Service unit Sixty Five Thousand One Hundred Two And

Paise Fifty Eight Only.

Four gas Area Valve Service Unit Eighty Two Thousand Two Hundred Thirty

Four And Paise Twenty Only.

Five gas Area Valve Service Unit Ninety Eight Thousand Six Hundred Eighty

One And Paise Four Only.

Medical Gas Area Alarm for 2 services.

One Lac Fifty Seven Thousand Six Hundred

Fifteen And Paise Fifty Five Only.

Medical Gas Area Alarm for 3 services One Lac Sixty Three Thousand Seven

474 1.00 163783.62 Hundred Eighty Three And Paise Sixty Two Nos.

Medical Gas Area Alarm for 4 services

One Lac Seventy Six Thousand Eight

Hundred Three And Paise Fifty Three Only.

Medical Gas Area Alarm for 5 services

Two Lac Seventeen Thousand Nine Hundred

Twenty And Paise Sixty Three Only.

Oxygen Manifold (2x10) along with tailpipe, NRV and fittings. One Lac Fifty One Thousand Five Hundred

BPC flowmeter bottle along with humidifier bottle Two Thousand Five Hundred Twenty Five

Quantities Total Amount According

Quantities Total Amount According

Item (Civil Sor 2024-25 & Ele Sor 2026-27)