DEVELOPMENT OF HERITAGE SITE HAWA MAHAL, AT SURENDRANAGAR MUNICIPAL CORPORATION, SURENDRANAGAR (2nd Attampt)

Bill of Quantities

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials(A) By manual means

in area of light jungle

Running of required capacity pump for dewatering of surface water

including arrangement of pump suction and delivery pipes and other HP/

accessories at site including POL. Hr

Construction of coffer dam by supplying gunny bags (new E.C. bag) filled

with earth (available at site), its seweing, placing at proper location to stop

the flow of sewage/water in construction zone, its dismentaling after

3 construction and disposal of malva/bags upto a distance of 1 k.m. including Cum 2100.00 360.00

all labour material T&P etc completye in all respect.

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

4 Meter lead.(C) Hard Murrum Cmt 7783.00 256.12

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

5 out and stacking of useful materials and disposing off the excavated stuff Cmt 4396.00 620.24

upto 50 Meter lead.(E) Hard Rock

Filling in foundation and plinth with murrum or selected soil in layers of

6 20cm. thickness including watering, ramming and consolidating etc. Cmt 9229.00 282.02

complete. (more than 10 ton)

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

7 disposited layer by ramming and watering. Cmt 9495.00 130.39

Conveyence charges of lime murrum building rubbish earth manure or

8 sludge & execavated rock and rubbish [Earth] 5 KM Cmt 2641.00 7.59

Providing and filling rubbles including hand packing and filling interstices

9 with quarry spalls behind abutments and between returns as complete, As Cmt 877.00 1,064.80

per Detailed & Directed by EIC.

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1%

10 concrentration inclusive of one litre chemical emulsion appication at the rate Smt. 837.00 56.63

of 5 Litre chemical /Sqm of sur face is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse sand : 4-

graded stone aggregates 20 mm nominal size) and curing complete

11 excluding cost of formwork in (A) Foundation and Plinth Cmt 567.00 3,631.49

Architect: ARG Creation PVt. LTD. 1 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing double scaffolding system (cup lock type) on the

exterior side of building/structure, upto 25 metre height, above ground

level, including additional rows of scaffolding in stepped manner as per

requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre

centre to centre, horizontal & vertical tubes joint with cup & lock system

with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the

scaffolding for working platform etc. and maintaining it in a serviceable

condition for execution of work of cleaning and/ or pointing and/ or

applying chemical and removing it thereafter. The scaffolding system shall

be stiffened with bracings, runners, connecting with the building etc,

wherever required, if feasible, for inspection of work at required locations

with essential safety features for the workmen etc., complete as per

directions and approval of Engineer-in-charge. Note:- (1) The elevational

area of the scaffolding shall be measured for payment purpose. (2) The

payment will be made once only for execution of all items for such works.

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

13 reinforced concrete work in (A) Foundations, footings, Base of columns and Cmt. 1255.00 5,551.97

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

14 reinforced concrete work in (B) Walls, for foundation below the plinth & Upto Cmt. 1135.00 7,987.08

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

15 reinforced concrete work in (A)Base of columns below plinth Cmt. 137.00 6,241.80

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Ground Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

17 reinforced concrete work in Beams upto floor two level: PLINTH BEAM Cmt. 228.00 7,412.39

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

18 reinforced concrete work in Lintels & Copping upto floor two level. Cmt. 61.50 7,343.71

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

19 reinforced concrete work in Chajjas upto floor two level. Cmt. 4.00 7,514.40

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

20 reinforced concrete work in © Slabs upto floor two level. : Grade slab Cmt. 161.00 5,630.75

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

21 work in © Beams upto floor two level. . : GROUND FLOOR BEAM Cmt. 64.50 7,934.56

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced

22 concrete work in (C) Slabs upto floor two level. :Ground floor Slab Cmt 83.50 7,735.59

Providing TMT / CRS Bar FE 500D reinforcement for R.C.C. work including

23 bending, binding and placing in position complete upto all floor level. kg 345227.50 76.21

Architect: ARG Creation PVt. LTD. 2 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

White Stone Bela mesonry block in course in superstructure with stone of

approved quality in Cement Mortar 1:5 (1-Cement :5- course sand)

24 including packing the joints etc. complete; foundation to Floor level. Cmt 530.50 4,753.96

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

25 Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Cmt. 24.50 4,051.78

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work

in superstructure above plinth level upto floor two level (B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in cement mortar 1:5 ( 1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Extra for half brick

masonry in superstructure above plinth level upto floor two level. (B)

27 Conventional Smt 82.00 641.16

P & L dry rubble stone pucca pitching with panel of stone masonry (a) upto

45 cm thick hard stone wall for pitching in C.M. 1:5, with pointing in CM 1:2,

Including the beam grid of horizontal & Vertical beam of specified grade of

concrete shown in the detailed drawing with pcc on the well compacted soil,

28 inverted filter and header stone but with 10 cm thick murrum layer (for Base) Smt 10955.50 2,127.21

incl. hand packing and trimming and dressing slopes etc. complete, as per

detailed by Architect / Consultant and directed by EIC

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment. Including

providing and fixing the jali with nails, etc complete as directed by the site-

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

30 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Smt 682.50 163.85

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

31 (ii) Cement mortar 1:4 (1-cement :4-sand) Ground floor Smt 425.00 123.13

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

32 cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- Smt 6008.00 326.11

sand) etc. complete

Stone work (machine cut edges in veneer work) for wall lining upto 10 m

height, backing filled with a grout of 12 mm thick cement mortar 1 :3 (1

Cement : 3 coarse sand) and jointed with Cement mortar 1 :2 (1 cement :

stone dust), including grinding with hand grinder on joints, rubbing and

polishing complete. (To be secured to the backing and the sides by means of

33 cramps and pins which shall be paid for separately). Dressed sand stone of Smt 1697.50 4,451.07

approved shade by architect and EIC complete as per specification including

all tools. Sand stone of 18-25mm thk.

Stone work ashlar sunk or moulded or sunk and moulded upto floor five

level in cement mortar 1 :6 (1 cement : 6 coarse sand) including pointing

with white cement mortar 1 :2 (1 white cement : 2 stone dust) with an

34 admixture of pigment matching the stone shade : Sand stone Cmt 72.50 109,772.86

Architect: ARG Creation PVt. LTD. 3 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished

at all exposed Surface, Pre-moulded and pre-polished, machine cut Granite

of any colour and shade, & finish, as per detailed by architect /Consultantfor

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1 acid

proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on

12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated

35 with white cement, mixed with matching pigment, epoxy touch ups, Smt 294.50 4,205.64

including BSpacer tape 6.4 mm thick x 4 TO 6 mm as per detailed groove,

rubbing, curing, moulding and polishing to edges to give high gloss finish

as per concept etc. complete at all levels.

Providing and fixing 18 mm thick gang saw cut, Ruff [Send-blasted-

LAPORTA] AND Mirror polished in pattern & at all edges should be molded in

required finish, Pre-molded and pre-polished, machine cut Granite of any

color and shade, & finish & texture, as per detailed by architect/ Consultant,

for flooring, dado skirting, cladding, steps and risers, kitchen platforms,

vanity counters, window sills , fascias and similar locations of required size,

approved shade, color and texture laid over 20 mm thick mortar 1:4 (1 acid

proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on

12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated

36 with white cement, mixed with matching pigment, detailed groove, rubbing, Smt 20.00 4,146.56

curing, molding and polishing to edges [Ruff [Send-blasted- LAPORTA] AND

Mirror polished in pattern on all exposed Surface] to give high gloss finish

as per concept etc. complete at all levels. as per detailed by architect /

Consultant and directed by EIC.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

37 flooring and jointed with color cement slurry including finised with flush Smt 67.50 1,472.91

pointing & cleaning the surface etc. complete for antiskit

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

38 flooring and jointed with color cement slurry including finised with flush Smt 18.00 1,204.20

pointing & cleaning the surface etc. complete for light shade

Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

39 coarse sand) and jointed with white cement slurry Smt 312.94 1,141.45

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

40 mixed with pigment to match the shade of slab including rubbing and Smt 484.00 971.95

polishing etc. complete. (A) 25mm thick

Providing and fixing Glass mossaic tiles on finished plain wall surface of size

20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as

per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on

the wall surface with the help of approved adhesive applied at the rate of

kg per sqm and grouting of the same. The rate is inclusive of all operation,

material and required pattern approved by Engineer-in Charge:

Architect: ARG Creation PVt. LTD. 4 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing 0.70 meter wide sandwich type platform including

supplying and fixing granite stone 18 mm thick mirror polished stones in

top and side position and vertical strip at front over 25 mm thick polished

kota stone platform fixing in top and sides and intermediates supports

42 fixing with cement mortar and adhesive and finishing including making Smt 18.00 7,910.56

recess for Kitchen/ Laboratory sink etc. complete as approved and directed

by Consultant / EIC.

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length Incl.

Providing and fixing 35 mm thick ISI marked flush door shutters conforming

to IS : 2202 (Part I) decorative type, core of block board construction with

frame of 1st class hard wood, with 1mm. thk, ISI marked designed laminate

in any finish on both faces of shutters., slit openings with bidding Patti &

6mm thk designed acid wash glass,. Stainless Steel butt hinges

43 [125x65x2.5mm. IS1281712] with necessary screws, using branded S.S. Smt 32.00 8,776.90

matt /glossy / platinum finished accessories, Colour / polishing all bidding

parts, and also incl. with all Material, labour, tools, tolerance, scaffolding

etc. complete as per concept /direction and approved by Architect, and

directed by Engineer-In-Charg

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges &

44 fintures. The whole FRP frame & shutter is to be water proof weather proof, Smt 13.00 2,019.98

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S

hinges with fastener sleeve & alluminium fixtures & fastenings.

Providing and fixing window having extruded aluminum Colour Powder

Coated section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

45 vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt with Smt 16.00 1,705.67

5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated

46 alluminium frame for ventilation with 5 mm thick frosted glass as details etc Smt 5.00 1,175.56

complete for Ventilation

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square

47 or round bars with round headed bolts and nuts or by screws (A) Plain Grill. Kg 24959.54 101.17

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of Engineer

in charge.Column ( 122 x 61 x 3.6mm

Fabricating, supplying and fixing in position SS railing for staircase and

balcony with brush finish and 304 grade as per Indian Standrd and detailed

drawing including grinding, cleaning and filling the welded spots with SS

49 railing (Only Length will be paid for payment heigth max.1.0 mt.). The Work Rmt. 20.00 3,564.29

to be executed as per consultant drawing .

Architect: ARG Creation PVt. LTD. 5 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of Ridge flashing for roof panel shall be made out of

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of minimum

240 mpa steel grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of minimum 25 microns

50 to avoid scratches during transportation. The ridge shall be fixed to the Smt 75.00 858.67

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/ flashing etc complete .

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from ortar dropping and other foreign matter and

sand papered smooth. Wall painting (two coats) with plastic emulsion paint

51 of approved brand and manufacture on undecorated wall surface to give an Smt 371.00 119.56

even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new ceiling surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. Wall painting (two coats) with

plastic emulsion paint of approved brand and manufacture on undecorated

52 Ceiling surface to give an even shade including throughly brushing the Smt 426.00 122.67

surface free from mortar droppings and other foreign matter and sand

papered smooth. Extra over item 57 for painting with plastic emulsion paint

of approved brand on ceilings and sloping roofs.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

53 the surface to remove all dirt, and remains of loose powdered materials.etc Smt 5018.00 114.53

Providing & Laying M250 grade concrete trimix using P21 (water reducing

concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm

per bag of cement including carrying out vaccum dewatering and power

floater treatment in floors well compacted mechanically vibrated finish to

require levels making C channel 75 x 75 mm required to maintain level

54 slope and thickness of the concrete road leveling of placed concrete with Smt 2.00 1,038.25

surface vibrator and finishing with power floater & trowel light brooming the

surface & including cutting & filling of expansion joint as directed by

Engineer in charge

Providing and laying 40 mm thick Cobble Stone, hand cut and chiseled

dressed on top of required or detailed sized and design and color in flooring

of Approved Quality with Cement colour mixed pigment grouted flooring

pavement As per Architectural Concept & Design Incl. laid on a bed of

mm thick cement mortar 1 : 6 (1 - cement : 6 - coarse sand) finishing with

55 including grouting the joints with epoxy, polymer & white cement & Smt 3615.00 2,068.08

matching pigments etc., complete. [a] Spacer tape 6.4 mm thick x 4 mm to

mm as per detailed groove, etc. complete as per approved pattern and

detailed drawing by Architect at all level. and as directed by E.I.C.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

56 2006 including 35 mm Sand layer for levelling and filling the joint with sand Smt 3834.00 683.88

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Architect: ARG Creation PVt. LTD. 6 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing 12' height, 1.5" EMBOSSED Mat / polished / colored SS

LETTERS MADE FROM 1mm thick 304 quality SS sheet cut outs on front

58 surface, 0.5mm thick Mat / polished / colored 304 quality Sheet for emboss Per/le 39.00 1,414.00

Providing and fixing Directional and Informative Signages- SS Plate, Grade

304, Brush finish, 2mm Thickness with smoothen corner edges, Acid etching

59 with duco color, SS studs 1.5' away from wall.fitting as per dirction of Smt 15.00 92,433.18

Architect and EIC

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

60 using white cement including rounding off junctions and extending them Smt 389.00 747.29

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane (ELASTOROOF PU– Sunanda speciality pvt coating ltd

or Equivalent) over uniform surface of slab. Apply 2 coats at dosage of

kgs per sqm to achieve the required minimum DFT of 1.5mm. It should

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700%

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter.Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

CHILDREN FUN PLAY WITH ADVENTURES

Providing and fixing several playing games items that includes Tyre wall-01

Nos., Slope Net-02 Nos., Swing (Jhula of 5 seat)- 01Nos., Zig-Zag Balance-

02Nos., Seesaw- 02Nos., Marry go Round & Spinner- 02Nos., Run Escape

Timer- 01Nos. complete as per detailed Specifications and as shown in

drawing & approved by the consultant & directed by EIC.

LAYING OUT LAWN – After excavating soil upto 30 cm. depth & removing

unwanted stuff, stones etc. Preparing soil for planting by supplying and

mixing 6 inch river fine site and 0.5 cmt FYM maximum 100 sqmt of lawn

area and doing termicide @ 1 fit / 100 sqmt area and planting selection

64 type / approved lawn grass at maximum 6 cm x 6 cm distance and maintain Smt. 2760.00 76.65

it upto 120 days. Maintainance include all operations i.e. watering, grass

cutting, gap filling, applying of fertizer if require etc.

Supplying, Spreading and leveling of good earth like fertile soil as directed

65 etc comp Cmt 429.00 405.50

Supplying, Spreading and leveling of good quality river Kap Filling 100 mm

66 as directed etc comp. Cmt 291.00 405.50

Supply and Planting saplings of Hedge plants like kadvi mahendi, karmda,

dyuranta, nikodeviya etc. specifies bag size is 4 inch x 6 inch, well

67 established & free from disease at site. as per the instructions Nos. 1500.00 5.41

Supply and Planting saplings of Ficus panda, Ficus benjamina, Ficus

benjamina variegated, Ficus longisland bag size is 13 inch x 13 inch, well

68 branched, well established & free from disease at site as per the instructions Nos. 400.00 135.27

Architect: ARG Creation PVt. LTD. 7 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

shall be concealed in wall as directed necessary fittings such as bends,

69 shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, Rmt 150.00 831.22

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type

B pipe confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved make

for drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

70 shall be concealed in wall as directed necessary fittings such as bends, Rmt 150.00 835.15

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing to wall, ceiling & floor 40mm dia. CPVC threaded tubes of

class SDR 13.5 /schedule 80 confirming to IS 13592 of the following

nominal bore including G.I. fittings as required for completion of job, G.I.

76 clamps including making good the wall, ceiling & floor etc. complete as per Rmt 20.00 442.04

detail & the instruction of EIC.

Architect: ARG Creation PVt. LTD. 8 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing to wall, ceiling & floor 20mm dia. CPVC threaded tubes of

class SDR 13.5 /schedule 80 confirming to IS 13592 of the following

nominal bore including G.I. fittings as required for completion of job, G.I.

77 clamps including making good the wall, ceiling & floor etc. complete as per Rmt 20.00 205.00

detail & the instruction of EIC.

Providing & Fixing gun metal check or no return full way wheel valve etc.

78 complete as per the instruction of EIC. (C) 25 mm. Dia Each. 20.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve etc.

79 complete as per the instruction of EIC. (E) 40 mm. Dia Each. 10.00 663.43

Providing and fixing screw down bib taps of following size.(A) Brass screw

80 down bib tap polished bright. (i) 15mm dia. Each. 20.00 186.83

Providing and fixing pillar tap, capstan head, screw down high pressure with

81 screws, shanks and back nuts. (ii) 20mm dia. Each. 5.00 354.69

Providing and fixing brass screw down stop tap.(C) 25mm dia.

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter

with 150 mm X 150mm S.S.jali for floor or nahni trap of the following

nominal diameter of self cleansing design with C.I screed down or hinged

83 grating including the cost of cutting & making good the walls, as per Each. 15.00 558.36

detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

84 standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each. 15.00 1,292.19

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete for (i)

Inside dimensions 455mmx 610mm & 450mm deep for single pipe line. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished

with a floating coat of neat cement & making channels in cement 1:2:4 mix (

1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

smooth complete including curing & testing… ( I ) inside 900mm x

mm & 1.5 m deep including R.c.c. cover with frame size 560 mm diameter (

86 A ) with 230mm thick walls of brick masonry using brick having crushing Each. 20.00 19,330.46

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),

(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as

per detailed, directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter wash

basin with single hole for pillar type with Cl or MS brackets painted white

including cutting holes, ranking bolts for Fixing & marking good the same,

including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm

dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down

high pressure with screw shank & back nuts & rubber plugs, 15mm dia brass

stop cock (50/75mm p.v.c. Drain connection pipe, Water Connection Pipe of

required Size, & testing the same for leak proof, etc. with all material &

labours to complete this job in all respected manners, etc. complete as per

detailed & approved by the consultant & directed by EIC.

Architect: ARG Creation PVt. LTD. 9 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing wash down water closet (European type, W.C. Pan) of

ESSCO Make with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and

cover for wash down water closer with C.P. brass hinges, C.P. brass toilet

paper holder, Jet Spray Incl. Connection and rubber buffers. (A) Vitreous

China., etc. complete as per detailed & approved by the consultant &

directed by EIC.

providing and fixing water closet squatting pan(Indian type W.C. pan ) size

580 mm of ESSCO Make including providing and fixing vitreous china

mm size 'P' or 'S' trap including jointing the trap with pan and soil pipe in

CM (1:1) (1 cement :1 fine sand) etc complete. As per instruction given by

89 engineer in charge. (A) Vitreous China., etc. with all material & labours to Each. 2.00 936.96

complete this job in all respected manners, etc. complete as per detailed &

approved by the consultant & directed by EIC.

P/F approved brand Flat Back Urinal of ESSCO Make For Gents Toilet with

15mm Push & stop tap of approved brand including connection the urinal

with rigid pvc nozzle & pvc connection pipes & bottle trap in trap etc.

complete as directed by engineer in charge (A) Crystal White flat back or

90 corner type size 590 mm X 375 mm X 390 mm, etc. with all material & Each. 6.00 1,036.27

labours to complete this job in all respected manners, etc. complete as per

detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden

plugs with C.P. brass screws & washers, etc. with all material & labours to

91 complete this job in all respected manners, etc. complete as per detailed & Each. 5.00 833.73

approved by the consultant & directed by EIC

Providing & Fixing handicap toilet set with Wall-mounted European Closet &

wash basin & all handicap requirement with dual flush tank, seat & lead

(heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted

brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings

complete with grab rails etc. rubber buffers, C.P nuts, bolts etc making holes

in walls & floors, & finishing for ready to use. The rate includes all necessary

connection charges as per product detail to the satisfaction of Architect /

engr. in-charge where required & the final handing over etc. complete as per

92 specifications, drawings & as directed by the Engineer-in-charge. The scope

includes following items: EWC with seat cover & dual flush tank & WASH

BASIN SET: - CERA 'CRUSE SET' as approved by Architect / consultant &

Directed by EIC.

Providing and fixing chromium plated brass half trun flush cock of approved

quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

94 painted white including cutting holes in walls and making good the same Each. 1.00 2,280.27

but excluding fittings.

Providing erecting and fixing double coated ISI water tank of required

95 capacity each with all necessary fittings and connection etc. complete on Ltr. 17000.00 3.95

Lowering of Submersible pump set complete with required nos and size of

Column pipe ( GI / HDPE pipe) erected by means of proper chain pulley block

& pipe wrenches after checking of threads of each pipe with coupling to take

96 the load of the pump set and pipe assembly filled up with water with trail Job 1.00 2,932.79

testing, wiring GEB test report.

S.I.T.C. submersible pump set with all required panel & required materials

for suitable bore of 100 mm. dia. or more having three phase motor capacity

not more than 3 H.P. of different range with following capacity . Lifting and

97 Lowering taken extra. (A) (20 stage) 170 to 185 LPM discharge at 57 to 48 Each. 1.00 21,694.80

mtrs. Respectively head suitable for 50 mm dia. delivery pipe, Cat.III

98 Flat PVC cable size 4.0 sq.mm Mts. 70.00 85.85

Architect: ARG Creation PVt. LTD. 10 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

99 HDPE pipe - 40 mm dia. Mts. 70.00 126.25

Providing and fixing in position U.P.V.C. cowl went to pipes. (C) 100mm dia

Supplying and fixing reinforced concrete heavy duty non pressure pipes with

collars for culverts carrying heavy traffic as per IS 458-1991 specifications

101 including setting the pipes in C.M. 1:2 watering and laying (to level or Rmt 500.00 649.92

slopes) of class NP3 of following internal daimeters.(i) 300mm dia.

Providing and fixing Sclupture (Material- Fibre) 8-10 ft tall, with

proportionately base dimenstion as per approved design by consultant and

102 complete as per instruction of engineer-in charge and consultant. Job 2.00 1,010,000.00

Dismentaling of stone floors / Stone Pitching laid in mortar including

103 stacking of serviceable materilas and disposal of Smt 2500.00 46.77

unserviceable materials with all lead and lift.

Demolition of Brick work and stone masonry including stacking of

104 serviceable materilas and disposal of unserviceable materials with all lead Cmt 37.00 536.09

and lift.(ii) In Cement Mortar.

Reparing and Replacing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design Confirming

105 to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the Smt 100.00 418.14

joint with sand in proper line and level as per guidlines of IRC : SP 63-2018

Disilting & clearing of pond with excavating the required depth with deep

cleaning of silt, stones,pebbles, wastage and several flaura & fauna etc and

106 complete as per detailed, directed & approved by the consultant / EIC. Cmt 6531.00 170.69

Coursed rubble masonry with hard stone of approved quality in foundations

and plinth in Cement Mortar 1:6 (1- Cement : 6-coarse sand) etc. complete.

Coursed rubble masonry using existing hard stone within the site of

approved quality in foundations and plinth in Cement Mortar 1:6 (1- Cement

108 : 6-coarse sand) etc. complete. Cmt 35.00 2,959.30

Pointing on coursed stone masonry with cement mortar 1:3 (1-cement : 3-

109 coarse sand) (B) Ruled pointing Smt 44.00 90.68

Providing, Manufacturing, and fixing Designer grill, Railing, Gate, or any

designer article at Particular location of Site, as per Detailed drawing which

made from polished, Designer, Embossed, Shaped, as mentioned', Wrought

Iron,/ C.I.'s ' Bars, plats, Sq. & Ro. Pipes, Ornamental Articles in sufficient

Grade, Size, & Gauge. Incl. CNC. Water jet design cutting as per architect

concept in required thick & Guage iron Article, And 'I' Section at necessary

require and shape and Design in all it's respected manners. All Joints of grill,

railing, Gate or any designer article Should be with male female ( Hole and

Dowels jointed ) and liner Elector/ Gas Welded / riveted / screw joint as per

requirement and detailed, in perfect shape and strength with grinding,

110 polishing, covering with ornamental Article like brass strip, all job of grill / Kg 160.00 176.75

railing/ gate are Incl. priming coat, P.U. Spray paint or all of describe above

finish as per architect concept and detail in it's all respected manners, and

also incl. with all Material, labour, tools, tolerance, scaffolding, transporting

with loading, unloading, tax, etc. complete as per Architect drawing and

detail and directed by EIC.

Architect: ARG Creation PVt. LTD. 11 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Strengthening of existing bridge having components such as Crash Barrier,

Super structure, pier cap, Bearing (If provided), sub structure and Retaining

wall; includes all the required testing, rebarring, retrofitting, wearing coat,

etc with all material required steel, Admixtures chemcials, Labour,

Formwork, Etc. Contractor will be paid only for the activity executed as per

111 requirment and approved by Consultant & client. Payment shall be made Job 1.00 3,535,000.00

under the Rate analysis prepared by consultant within the amount fixed and

complete as per detailed, directed & approved by the consultant / EIC.

Providing and erection of FERROCEMENT STRUCTURE with 8mm Fe 415 bars

skeleton steel As per related item''s Structural Nouns Kg. / Cmt. and weight,

necessary M.S. Structural Frame and foundation In all Respect of

Architectural concept and detail, and Two types of meshes, each stage single

layer of wire mesh was provided. Chicken mesh (Hexagonal wire mesh) 1 to

8% , Fiber reinforced and Water proofing Chemical as per manufacturer''s

direction and volume, of the total structural volume. Surface finishing of

mm thickness and 1:1.5 CM (1: cement and 1.5 sand) placed throughout the

structure & should be done with proper and sharp finish with oxidized /

112 silicon based antifungal paint with matt / glossy / high gloss or all as per Smt 450.00 4,890.42

directed finish layer in it''s all respect. Joints of 4 stages at lateral bars, were

filled with rich mortar. Properly curing should be done for 14 days. Item

includes formwork/shuttering, Structure Steel, Fiber Reinforced, Water

proofing contain, color and cladding finish, scaffolding etc. complete as per

instruction/drawing by the architect.

Carryout Soil Investigation work including exploratory drilling of 150 mm

dia borehole in all sorts of soil& Rock up to 10m depth from G.L, collecting

undisturbed samples at an interval of 1.5 m. depth, determining depth of

water table etc. Conducting necessary laboratory tests for all type of

classification and determination of soil parameters necessary for

113 determining pile capacity like density, shear and consolidation parameters Job 1.00 44,844.00

etc., including submission of report in three copies covering investigation

data and recommendation for SBC etc. all as per specification at required

Conducting topographical survey, drawing showing topography, boundary,

dimensions, diagonals, existing structure and mapping etc in the scale

1:500 with reference to existing structure/boundary and mapping of all

topographical features like tree, electric poles, telephone poles, culvert,

114 nallah, drain and existing structure etc, conducting spot levels at 5mx5m Job 1.00 15,150.00

grid to the accuracy of 1 mm and contour map at 0.25m interval.

Providing & laying average 18-20mm thick double coat water proof smooth/

wired finish cement plaster on sides of masonry work/ block wall/ RCC wall,

12 to 15mm thick first coat in CM 1:3 (1 cement : 3 coarse sand) by

spraying, second coat of 6mm of CM 1:3 (1 cement : 3 fine sand) and mixing

water proofing compound powder & liquid of approved make in

recommended proportions (by manufacturers) in both coats including

finishing with a flooting coat of neat cement slurry etc complete for all floor.

and shall be guaranteed for minimum period of 10 years after handing over

the completed building by the main contractor to be finished as directed.

115 Stamp paper guarantee 10 years to be furnished before receiving any Smt 204.00 334.48

payment from the client. Waterproofing powder & liquid of approved make

recommended proportions is to be applied before each coat and final

finishing coat. (Item shall be operated for water retaining structures, sunks,

basement walls & Slab(10mmthk.) and other places specified by Architect/

Providing and laying Rough Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

116 laid over and jointed with grey cement slurry including rubbing and Smt 115.00 1,038.76

polishing etc. complete. (B) 30 mm thick

Architect: ARG Creation PVt. LTD. 12 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Brick Tile claddig work with common burnt clay F.P.S. (non modular) tile

bricks of class designation 10 using tile adhesive of approved brand

including making Horizotal and vertical grooves of 8-10mm wide with

117 grouting and coating complete as directed eingineer-in-charge in Smt 69.00 1,838.10

superstructure above plinth and upto floor five level.

Providing and fixing Astro Turf roof of 15mm thickness, Gauge- 3/16,

Stitches/ 10cm- 33 more or less 2%, Dtex- PP/5500 more or less 3%,

Density- 69300, Backing- Double pp+Mesh+SBR, U.V Stability- High, Color-

118 Green, Roll Size- 2m * 25m, Including Adhesive of approved make and Smt 450.00 999.90

complete as per detailed, directed & approved by the consultant / EIC.

Supplying and fixing Statue made from Wrought Iron with CNC Cutting on of

119 size 12' X 8' with fully finished as per the specifications approval & complete No. 1.00 580,750.00

as per Architect drawing and detail and directed by EIC.

Point wiring in Copper (Modular)--Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.--(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in / flushed on wall/ceiling, complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.--Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.--(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per

122 pipe erected with following type of accessories.--[I] For 6A Plug and 6 a Pt. 20.00 558.53

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board--

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered

with appropriate front plate modules erected on / in wall / ceiling as per

123 pipe erected with following type of accessories.--[II] For 16A Plug and 16 Pt. 20.00 823.15

amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.--(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. CAT III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

124 fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 250.00 36.36

following dia of pipes, in approved manner as directed--b) 25 mm

Architect: ARG Creation PVt. LTD. 13 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

125 fittings & Junction boxes fixed with adhesive solution & Clamps with Mtr. 500.00 75.75

following dia of pipes, in approved manner as directed--d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

126 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 Mtr. 300.00 23.23

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

127 accessories of same material at required depth in existing trench for laying Mtr. 1500.00 112.11

of cable. below ground / road surface for enclosing cable . (C))90 mm

Mains & Wires--Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (general wiring + in street light) --(a) with medium class

Rigid PVC pipe and accessories--(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (general

wiring + in street light)

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

130 green colour for earth continuity of following size (FRLS) (a) with medium Mtr. 1200.00 124.23

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

131 insulated stranded wire of green colour for earth continuity of following size Mtr. 500.00 163.62

(A) with medium class Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

132 front plate , modules erected with necessary connection. As desired by Ea. 50.00 28.28

Engineer In charge

(7) Blank Plate Single Cat-III

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

133 insulating tape etc for following size of cables.--(A) 2 to 4 core 2.5 / 4 Sq. Ea. 100.00 37.37

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

134 switchgear terminals with brass/cadmium plated nut bolts in an approved Ea. 100.00 9.09

manner. (A) 1.5/2.5 to 6 Sq.mm

Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

135 box having following capacity (A) 6 to 32 Amp. Cat.III Ea. 48.00 328.25

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (b) sheet steel double door

SITC of extra Junction Box with all required accessories and two no. cable

137 protection GI pipe of 40 mm dia as per requirement Ea. 55.00 1,664.48

Architect: ARG Creation PVt. LTD. 14 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & erecting approved make street light / wall mounting junction

box compression moulded from SMC (thermoset plastic) vertical sliding

cover having locking with square head stud loop in / loop out in built

138 terminal suitable for four core cable, waterproof of I.P. 54 protected with Ea. 55.00 725.18

clamp or bolt nut & earth bolt of following size. (B) 250mm x 194mm x

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

139 1.1 KV.grade to be erected as directed of following size. (B)3 core 4 Sq. mm Mtr. 1500.00 76.76

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

140 1.1 KV.grade to be erected as directed of following size. (B)4 core 4 Sq. mm Mtr. 1500.00 85.85

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

141 or in existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm Mtr. 2000.00 176.75

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

142 or in existing trench / pipe of following size of cables (C) 4 core 35 Sq. mm Mtr. 2000.00 296.94

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

143 grade ISI marked copper wires of following size to be erected as directed.(h) Mtr. 200.00 85.85

2.50 Sq.mm 3 core round PVC sheathed

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

144 switchgear terminals with brass/cadmium plated nut bolts in an approved Ea. 90.00 24.24

manner. (E) 35/50 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

145 switchgear terminals with brass/cadmium plated nut bolts in an approved Ea. 90.00 30.30

manner. (F) 70 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

146 switchgear terminals with brass/cadmium plated nut bolts in an approved Ea. 90.00 9.09

manner. (A) 1.5/2.5 to 6 Sq.mm

EARTH LEAKAGE CIRCUIT BREAKERS.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component.for following Max. rating erected as directed Cat-III (ii)

Providing, erecting, testing & commissioning approved make oil immersed

ONAN cooled, double wound, core type indoor / outdoor copper wound

11KV/ 433V step down transformer of following capacities operating on

phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full

temperature rise in oil not exceeding 45 Deg.C.at maximum ambient temp.

of 50 Deg. C. complete with necessary radiator first filling of new

148 transformer oil & standard fitting as below complying with IS 1180( Part 1 Ea. 1.00 670,987.44

):2014 standards with energy efficiency level 2 (a)250 KVA

Max. allowable loses at 50 % of rated load is 0.98 KW and at full load is

Architect: ARG Creation PVt. LTD. 15 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

MV Switchgear & Power Panels

Supply, Unloading at site, shifting to site, assembling, leveling, grouting,

erecting, Testing, & Commissioning main L.T. panel board, fabricated from

M.S. sheet & folded channel totally enclosed cubical type

compartmentalized. Scope Covers Unloading at Site, Store in Weather Proof

Condition, Shift to the Location Basement / GF / FF, Grouting, Installation,

Testing & Commissioning complete in all respect & As per the instruction of

Architect / Consultant / Engineer Incharge. Scope also covers Co ordination

with Panel Manufacturer.--Design, fabrication, assembling, supply,

installation , testing of Panels for 415 V, 3 phase, 50 Hz, 4 wire power

supply system.--Panels shall be fabricated out of 2 mm thick CRCA sheet

steel in cubical formation, compartmentalized in Form 4b Construction,

floor mounted, free standing and shall be dust and vermin proof. 3 mm

thick cable gland plate, shall be provided both at the top and the bottom of

the panel. All large panels shall be provided with lifting hooks. Distribution

panels shall be fabricated in accordance with the specifications.

Note : Panel vendor has to provide Surge Protection at every stage of the

Distribution.--1) Supporting rigid steel framework.--2) Cubicle type,

149 gauge CRCA sheet steel enclosed.--3) Complete with interconnections and Nos. 1.00 147,429.70

distribution bus bars.--4) Proper bonding to earth.--5) Painting/lettering

on Breakers and distribution boards, the location they serve, providing on

each panel its circuit diagram 6) Providing cable clamps / supports within

distribution boards cable alley.--7) TPN ACB’s / MCCB’s shall mean 3 pole

ACB’s / MCCB’s with adequate size of neutral link.--8) All MCB’s shall be of

minimum 10 KA breaking capacity.--9) The breaking capacity of MCCB’s are

mentioned panel wise.--10) All motor feeders MCCBs shall be of motor

duty.--11) Distribution panels shall be Powder Coated with Siemens gray

paint shade no. RAL-7032 of IS-5.--12) Degree of protection for following

type of distribution panel enclosure shall be as per IS:13947-1993.--a) IP

52 for indoor panels.--b) IP 54 for kitchen and laundry panels.--c) IP 55 for

outdoor panels.--13) All MCCB’s shall be provided with operating

mechanism for door interlock & with the roraty handle. 14) Current density

of aluminium shall be 1 sq mm for 0.8 amps for rated current of bus bars

and current density of copper shall be 1 sq.mm for 1 amps for rated current

of bus bars.--15) Tinned copper earth bus as specified in the BOQ / SLD

shall be provided through out the length of each board.--16) All measuring

instruments (Meters) shall be of digital electronic with LED of approved make

Providing with BAS.--17)

and erecting MAIN LTAllPANEL-Incoming

hinged door shall:200

amps FP through

KA) with following accessories: 1 Set MCCB ON / OFF / TRIP indicating lights

with control MCB’s. Under voltage release 3 Nos. of 0-200/ 5 amps CTR

digital VAF with 3 nos 200/ 5 amps, 15 VA Class 0.5 CT’s.--Digital type 0-

500 Volt digital voltmeter with inbuilt selector switch & shall be protected by

2 amp TP MCB’s--Bus Bars 200amps FP aluminium bus bars with coloured

heat shrinkable insulated sleeve.--Outgoing All the outgoing should be

150 provided with RYB - On - Off - Trip I/L . ( For MCCB only ) Ea. 2.00 228,229.70

80 amps 4 pole MCCB ( 10 KA ) : 6 Nos.--32 amps 4 pole MCB ( 10 KA ) :

Nos.--80 amps 4 pole MCB ( 10 KA ) 2 Nos.--25 amps 4 pole MCB ( 10 KA ):

2 Nos.--Astronomical Digital time switch : 2 No.

Providng and erecting Approved make energy meter 3 phase 4 wire

unbalanced load rating, 10A to 60 Amp. based on ASIC(Application specific

Integral Circuits) digital technology with accuracy Class - 1 , temper proof,

free from effect of external magnetic field with 3 phase indication, earth &

151 impulse indication, 6 digit electro mechanical impulse counter, suitable Ea. 3.00 3,181.50

work on 120 V to 300V per phase 45-55 HZ, housed in robust enclosure

with erection as directed. Cat. III

SITC of Power Distribution Board (PDB) as under: 3 Phase 4 Wire TPN, 8 way

Pre-wired-MOG / MOV PDB for Auxiliary accessories Load power supply

152 (For MOV Pump delivery valves, valve at Header & for auxiliary load & Ea. 3.00 10,109.09

spare): Incoming: 63A 4P, MCB 'C' Curve Outgoing: 10 Nos. 32A 4P

SITC of Lighting Distribution Board (LDB) as

under: 3 Phase 4 Wire TPN, 6 way Prewired LDB (One each for Indoor &

153 Outdoor Lighting) Suitable to house : Incoming:

32A FP, ELMCB (30mA) Outgoing: 20A SP MCB 'C' curve (9 nos.) & 20A

SP MCB 'C' curve (9 nos.)

Architect: ARG Creation PVt. LTD. 16 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting Approved make Earth fault Relay suitable to mount

with inter connection suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following along with shunt trip

154 220V AC. with all internal connections & complete erected in existing Ea. 2.00 6,388.25

M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double door internally

supported on both side, with internal and outside looking arrangement with

look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet. Painting the

155 Section Pillar inside and out side with three tank powder coated paint. Ea. 2.00 19,695.00

section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of 1962 (A) 150 X 90 X 75 cm section

pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long

made from 40 X 40 X 6 mm thick MS angle.

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin

polyester/epoxy resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as well as non

conductive and shock proof. Pole should be provided with FRP/GRP base

bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU paint. Pole should

mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3,

Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption

(ASTM D 570) <0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa,

Flexural strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength

(ASTM D 695) 200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS 6746.Resin used shall be UV

resistance and pigmented. Pole should be painted with first coat of epoxy

primer and then two coat of highly weather resistance polyurethen paint to

ensure proper addhesion of the paint.Minimum thickness shall be 80 to 100 Ea. 145.00 13,624.90

micron.Defelection of the pole shall not exceed more than 10.0 % of the

length of the pole for the given load.Pole should be generally made as per

the dimensional data,performance criteria and some interchagebility

156 features of poles as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory accessories.The size

of pole and type of installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site requirement .

(1) 'A' class frp/grp pole suitable for base plate mounting [C] Overall Length

of 5.0 meter, Average thickness : 5mm, Top/Bottom Outside Dia.

76/160mm +/‐2.Weight of Pole 17.0 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 310 Ø * 12mmthk , Mounting hole PCD - 0.00 0.00

260mm * 4 nos. of 16 Ø hole)

Architect: ARG Creation PVt. LTD. 17 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & Fixing of LED street light / Flood light fittings with High

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 85 %, CCT 3000 K to 4000K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver

efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

157 BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM- Ea. 145.00 5,686.30

79 & LM-80 certificates)(C) Post Top Lantern LED fitting comprises of

Copper dust finish cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block. IP 65.(1)40W

Supply, Installation, Testing and Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019),

THD < 10%, compitible with electronic regulator unit for Speed Control and

all remaining accessories including safety pin, nut bolts, washers,

158 temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and Ea. 10.00 3,100.70

rectifier circuit with surge, over current and overload protection , 50 Hz,

Single phase AC Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge] (A) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

159 down rod erected duly painted for fan complete with proper insulation Ea. 10.00 126.25

without leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC

160 slab with Making the site as original. Ea. 10.00 50.50

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge

161 M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with Ea. 10.00 126.25

necessary finishing.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt

162 & Nuts erected with necessary hook of 10 mm M.S. Round Bar. Ea. 10.00 116.15

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame.

164 200mm with 1350RPM Cat.II Ea. 8.00 2,009.90

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

165 ranges of Wattage capacity of LED fittings.The Engineer ncharge may select Mtr. 300.00 158.57

any wattage capacity between the ranges hown.) (D) LED Strip Light (ii)

Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable

Driver complete, Cat-lll

Architect: ARG Creation PVt. LTD. 18 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

166 ranges of Wattage capacity of LED fittings.The Engineer ncharge may select Ea. 200.00 1,217.05

any wattage capacity between the ranges hown.) (E) Under Water Light,12V

DC including Driver,IP-67 with die-cast/deep drawn housing with impact

resistance clear toughened glass. (ii) 12 watts, Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % ( fitting

167 required LM-79 & LM-80 Certificates)(NOTE: Below description have shown Ea. 300.00 1,612.97

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (F) Spot Light

Lumens, Surge-2KV (ii) 8 to 11 Watts Cat-lll

Providing & erecting stand alone Wall mounted PIR motion Sensor with ABS

Housing single phase AC operation. Complete with Dual element pyroelectric

sensor, Digital Signal Processing Detection Range 12 meters, angle

degree, RFI and EMI immunity, Detects motion in it's coverage area.

Multipurpose device can be used as security device, an energy saving device,

168 an automatic switch. Complete with infra red sensor, Light & sensitivity Ea. 80.00 5,908.50

Sensor, Timer with Bye pass facility. Suitable for 1000 Watts incandescent

load or 750 watts of fluorescent load.

Supply & fixing decorative Hanging light with glass having cylindrical or

square shape having length not less than 10" & width not less 3.5" with

169 holder, lead wire as per required length but not more than 1mm & base Ea. 10.00 2,121.00

plate for fixing the fitting with ceiling.[a] suitable for led lamp. Cat III

Supplying & erecting approved make time switch with single pole air break

contacts suitable for 230 V.15/16A.complete with self starting motor driven

170 clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during Ea. 40.00 2,777.50

each 24 hours,With nickel cadmium rechargeable battery backup erected as

Providing and erecting required size HOT deep Galvanised iron strip for

171 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Kg. 200.00 90.90

Providing and erecting required size Copper strip for earthing of H.T. OCB /

172 ACB/ Transformer, LT panel board, Motors etc. using copper clamp. Kg. 30.00 937.28

Providing and erecting HOT deep Galvanised iron strip wire 8 to

173 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 200.00 90.90

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable

174 for safe earthing device. Ea. 10.00 833.25

Architect: ARG Creation PVt. LTD. 19 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia

of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V(c) For Electrical Installation covering Transformer

175 Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer Ea. 2.00 8,370.88

System(like Automation, SCADA) i.e independent Earthing in normal soil. [B]

For Electrical installation up to 11 KV located in other than normal soil

i.e. Soft Rock, Marshy Soil etc.--Length of Pipe : 2 mtr --Back filling

Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia

of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V(c) For Electrical Installation covering Transformer

176 Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer Ea. 2.00 6,893.25

System(like Automation, SCADA) i.e independent Earthing in normal soil.

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more

having three phase motor capacity not more than 5 H.P. with following

177 capacity . Lifting and Lowering taken extra.(B) (16 stage) 140 to 180 LPM Ea. 4.00 31,420.00

discharge at 96 to 69 mtrs. head respectively suitable for 50mm dia.

Providing & Erecting full SS Body (SS 304) Split type water cooler having

storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per

hour @ an ambient temp of 350 C.The outlet temp. of the water should drop

by 150C within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A, fan motor,

Copper Condensing unit with company fabricated Outdoor Unit water tank

surrounded by evaporating coil, thermostats, relay etc.complete with

necessary copper tube & Insulation, M.S Chanel Stand with Painting for water

tank & M.S. Powder Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

179 locating the fault all over the run and back filling the same and making the Mtr. 1500.00 54.54

surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over the

180 run and back filling the same and making the surface as normal ground. Mtr. 1500.00 72.72

181 (B) If additional machinery like hammer driller or JCB use [Add] Mtr. 700.00 351.48

Covering of cable with second class bricks or cement tiles laid cover the

182 cable crosswise & also on both sides with covering of 7. 5 Cm. layer of sand Mtr. 1500.00 157.56

above & below cable (16 bricks per meter)

Architect: ARG Creation PVt. LTD. 20 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

LIASIONING WORK :

Charges for doing liasioning work for obtaining the necessary

clearances rom the Electrical inspector / competent Authorities for the

total Electrical installation, co- ordinating with various agencies.

All necessary drawings, calculations, test certificates, etc. as

required by these authorities shall be prepared and furnished by the

EPC Vendor. Any modification/rectification as required by

these authorities shall be carried out by theEPC Vendor at free of cost.

The fees required to be paid to these authorities for inspection shall

be borne by Owner on production of documentary evidences

Providing & erecting Optical Fiber cable should be ISO/IEC- 11801 , Outer

sheath FRLSZH Shall be 9µ, Single mode OS2 steel armoured cable as per

ISO/IEC- 11801 Shall be able to meet Gigabit & 10 Gigabit Ethernet

performance requirement specified by IEEE 802.3z (1000 Base-X) & IEEE

802.3ae (10GBase-X) Shall have water blocked construction to prevent water

absorption and consequent damages. Water blocking with flooding Gel and

water blocking yarn shall comply for IEC 60332-3 for flame retardant, IEC

184 61034- 2 for low smoke & IEC 60754-2 for toxicity & acidity. Tensile load Mtr. 1500.00 87.87

should be 2700 Newton or higher Optical Parameters – SM, (a) Attenuation @

1310nm(max) ≤ 0.34 dB/Km, (b) Attenuation @ 1550nm(max) ≤

dB/Km with neccessory connections (B) 12 core Single mode

Supply, Installation, Testing and commissioning of Motorized Verifocal

Dome IP Camera,4MP, 1/3" Progressive Scan CMOS;

H.265+/H.265/H.264+/H.264/MJPEG; Color: 0.01 lux @(F1.2, AGC ON),

lux with IR; 25fps/30fps(2560×1440, 1920×1080); 3 VCA functions;

streams; 3D DNR; ICR; EXIR 2.0, up to 30m; DC12V&PoE; Built-in micro

SD/SDHC/SDXC slot; (refer to annexure - 1 for detailed specifications)

Supply, Installation, Testing and commissioning of IR Network Bullet

Camera ,4MP, 1/3" Progressive CMOS, ICR, 2560x1440:20fps(P)/(N),

2.8mm/F2.0 lens (4/6mm optional), H.265+/H265/H.264+&H.264, IP67,

186 DWDR, 3D DNR, BLC, IR range: up to 30m, DC12V & PoE,Support mobile Nos 2.00 13,184.54

monitoring (refer to annexure - 1 for detailed specifications)

Supply, Installation, Testing and commissioning of 64 Channel NVR

supporting 8 SATA, 320Mbps incoming bandwidth; Third-party network

cameras supported, Up to 5 Megapixels resolution recording, HDMI and VGA

187 output at up to 1920×1080P resolution, HDD quota and group management Nos 2.00 114,263.82

(refer to annexure - 1 for detailed specifications)

Supply, Installation, Testing and commissioning of 8 TB Surveillance Series

188 Hard disk supporting 24X7 operational efficiency Nos 1.00 32,521.24

Supply, Installation, Testing and commissioning of 24 Port PoE Switch, L2,

Unmanaged, 24 100M PoE port, 2 1000M combo port, 802.3af/at, PoE

189 power budget 370W (refer to annexure - 1 for detailed specifications) Nos 2.00 39,552.86

SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM (Including Five year free

190 maintenance with guarantee) Nos 2.00 12,335.13

SITC of SCREEN SIZE 105.41 cm diagonal (42” INCH), RESOLUTION FHD

(1920*1080), USB INPUT (2.0 SUPPORT) 2*Side(USB2.0), HDMI INPUT

2*Side(HDMI 1.4), USB DEVICE SUPPORT USB Supported HDD, HOTEL MODE

Yes, Basic, BLUETOOTH Yes (Ver. 4.1), WIFI TYPE(STANDARD)

191 802.11a/b/g/n 2.4G 2T2R, Built-in, WIFI BAND TYPE 2.4GHz, OS & VERSION Nos 1.00 93,081.60

INFO Android 'P' - 9.0, MEMORY FLASH 8GB EMMC, RAM 1.5.0GB , DDR3

2133Mhz. (Including Five year free maintenance with guarantee)

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as

192 per IS 13849 or 1 Kg capacity with necessary clamp for erection on wall Ea. 5.00 999.90

Architect: ARG Creation PVt. LTD. 21 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S. Flat

193 with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity Ea. 5.00 25,489.37

Cleansing Site including the uprooting of rank vegetation, grass, brush

wood, trees and saplings of girth up to 30 cm measured at a height of 1 m

194 above ground level and removal of rubbish up to a distance of 50 m outside Smt 500.00 55.00

the periphery of the area cleared.

Demolition of Brickwork & stone masonry in (II) Cement Mortar, including

stacking of serviceable materials & disposal of unserviceable materials with

195 all lead & lift as directed by Engineer-In-Charge. Cmt 400.00 560.00

Dismantlingstone floors,mosaic floor, PCC, etc laid in mortar including

stacking of serviceable materials & disposal of unserviceable materials with

196 all lead & lift as directed by Engineer-In-Charge. Smt 500.00 275.00

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement: 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty:1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab including

197 rubbing and polishing etc. complete. (A) 25mm thick etc. complete as per Smt 155.00 1,650.00

detailed by the architect / Consultant and directed by Engineer-In-Charge.

Providing and applying LIME BASED CHEMICAL WATERPROOFING TREATMENT

on the sunk area,wall area, and celling area including roughing cleaning the

surface after applying internal waterproofing 2 coats of KRISHNA CONCARE

Latex Water Resistant Bonding Agent Spread primer by using KRISHNA

CONCARE Latex in Water = 1: 4 by volume to obtain a thin layer. applying

198 coat for waterproofing on structures to prevent water infiltration and Smt 4200.00 650.00

dampness. including curing at with specified period as directed etc.

complete as directed by EIC.

Cleaning of entire inside and outside of building as per given remedies and

specification from Architect / Engineer in-charge firstly to remove all kinds

of algae/fungus/dust, dirt, or loose materials contaminants liatance etc with

Dry cleaning and water jet cleaning. After cleaning the entire outside surface

and weedification treatment applying two coat of unit bio- wash

199 concentrated coating for all roots of algae, fungus, lichens, mosses and big Smt 3780.00 450.00

plants etc. complete as required by site conditions and Architect / Engineer

in-charge approval.

Opening and repairing of all types of cracks in a "V" groove manner and

grout lime mortar in crack's cavity portion on an interval of 2-3 days plus on

some equal interval put a big size of stone clipping after which the top

200 surface of crack shall be repaired with traditional lime mortar etc. complete Rmt 900.00 1,500.00

as required by site conditions and Architect / Engineer in-charge approval.

Providing & fixing at New construction and Restoration of solid stone work,

Detection, part removal and repair of all eroded solid stone work on

parapets, columns, plinth, grills, lintel etc., including part cutting, including

new stone piece to match original design and finish, in line and level,

including refilling all joints in traditional lime mortar 1:2 etc. complete as

required by site conditions and Architect / Engineer in-charge approval.

Restoration of stone / Brick and plaster surfaces, Restore all surfaces of all

eroded stone members, over and above mentioned before including

application of bond coat followed by consolidate surface and adhesion

202 promoter for subtracts etc. complete as required by site conditions and Smt 2000.00 825.00

Architect / Engineer in-charge approval.

Architect: ARG Creation PVt. LTD. 22 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Restoring and repairing simple or ornamental plaster of front façade,

cornice, flower pattern, geometric pattern, Applying traditional lime plaster

on all surfaces, in proportion of 1:3 (lime: sand) with traditional method like

sieving, slaking, crushing and knocking etc and also use of only natural

additives in lime mortar, using approved quality lime cured as per

203 standards, to match with existing quality of mortar and plaster, applied and Smt 850.00 2,250.00

cured as per standards as required by site conditions and Architect /

Engineer in-charge approval.

Restoring and repairing simple or ornamental plaster single coat of front

façade, cornice, flower pattern, geometric pattern, Applying traditional

thappi lime plaster on all surfaces, in proportion of 1:3:7 (lime: sand:surkhi)

with traditional method like sieving, slaking, crushing and knocking etc and

also use of only natural additives in lime mortar, using approved quality lime

204 cured as per standards, to match with existing quality of mortar and plaster, Smt 2100.00 1,550.00

applied and cured as per standards as required by site conditions and

Architect / Engineer in-charge approval.

Applying traditional araise plaster (rough and smooth texture both)on

thappi lime plaster on all surfaces, with traditional method like sieving,

slaking, crushing and knocking etc and also use of only natural additives in

lime mortar, using approved quality lime cured as per standards, to match

with existing quality of mortar and plaster, applied and cured as per

standards as required by site conditions and Architect / Engineer in-charge

Dampness treatment, Fixing & grouting 10-12mm dia nozzles in to the

drilled hole and place the nozzle in such a way with distance of 12" inch

from each other, and Seal the nozzle with suitable material and allow it to

set at least for the day before grouting, Grouting should be carried out by

the means of hand pump sufficient enough to create pressure of

approx..2kg to 4kg must, inject silicon (Liquid and powder form both)

206 injection grout through pressure grouting machine, with the mixing Rmt 630.00 1,450.00

proportion of 1:10 ( one liter material & ten liter of water) etc. complete as

required by site conditions and Architect / Engineer in-charge approval.

Removing old detoriated plaster,wll tiles,paints,cement joints and unwanted

parts from entire building's inside-outside surface and staking away debris

207 from site etc complete as required by site condition and architect/engeineer Smt 1500.00 85.00

in-charge approval

As per architect instruction and remedies applying strengthning stages for

the weak part of the building like walls,slab, and each and every weak parts

208 etc. complete as required by site conditions and Architect / Engineer in- Smt 200.00 350.00

charge approval.

Brick work for wall -Providing and restoring/maintaining of architectural

work of brick work with traditional and natural ingredient based lime mortar

209 including cleaning all joints, sizing etc. complete as required by site Cmt 400.00 7,500.00

conditions and Architect / Engineer in-charge approval.

providing and applying treatment of wall,for that first apply weedification

treatment on the surface of wall and applying a sealer coat which seals

porosity & crevices and excellent adhesion of overcoated application and

then Apply a sleekcoat (water clear) for weather durable, resist hydrastatic

water and prevents erossion, after that apply uniflex (lime based) which

210 makes elastic & weather durable, wear and tear resistant, breathable.water, Smt 3780.00 650.00

CO2 ion & chloride ion diffusion resistant. anticarbonation coating. Non

toxic and resists hydrostatic pressure etc. complete as required by site

conditions and Architect / Engineer in-charge approval.

Architect: ARG Creation PVt. LTD. 23 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

providing and applying 6 stage treatment of strengthning and face lifting for

out side entire wall include 1St Stage cleaning the surface with brush for and

in 2 nd stage cleaning the surface with water's noramal pressure. After that

in 3 rd stage apply a sealer coat which seal porosity and crevices and give

excellent adhesion of over coated treatment along with consolidation of the

substract and in 4 th stage apply a sleekcoat for Avoding further erosion

abrasion,and to level the substract , and for 5 th stage again apply the sealer

coat to strengthen the base then after 6 th stage apply a two coats of

211 duraflex in red shed.this coating is U.V Stable water tight, weather durable, Smt 1050.00 950.00

dust repellant, with excellent architectural appearance and prevent growth

of fungus, algae, & moss etc. complete as required by site conditions and

Architect / Engineer in-charge approval.

Protective coating of all interior and exterior surfaces, including those

restored and cleaned, for protection against all weather conditions, with

prior approval of architect / engineer in-charge, inclusive of 1 years

212 performance guarantee etc. complete as required by site conditions and Smt 2000.00 550.00

Architect / Engineer in-charge approval.

Applying paint remover or grinding on painting surface and removing all

213 kind of paints on wooden,steel,and stone surface Smt 350.00 350.00

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot, tubular 'T', 'I" section, angle, plate, beam, channel section,

Bar, hollow box or Z purloins, Round or Square Pipes, of TATA or approved

make, for built up purloins, roof trusses, columns, side runners, tie beams,

sag rods, base plates gusset plates, cap plates, bearing bracing, gantry

girders, rails, require support, pipes, including all welded or bolted steel

structures of various types with approved I.S.I. mark electrodes, bolts,

anchor bolts including cost of thread, Anchor plate cleats etc. in RCC or

masonry work, including cutting, bending, welding, fixing, supplying,

214 Fabricating Decorative fevisted section or any structured member required Kg 300.00 150.00

to complete the job for Bridge, Trusses, Canopy, doors, Frame, Railing,

Entrance gate, pergola, Decorative hanging light, New window, parking shed

or space frame or any other required specified area as shown on drawing

and detailed specification or as per design incl. three coats of approved

brand primer and two coats of paints, necessary scaffolding, tools tolerance

etc. complete as directed by Engineer-In-Charge. (payment will be made for

weight of metal used in the work)

Restore and conservation of old wall painting near as per artist instruction

Total Amount Rs. =

Total Amount Rs. =

RUPEES EIGHTEEN CRORE THIRTY NINE LAKH SIXTY THREE THOUSAND THREE HUNDRED AND ZERO PAISA.

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as under

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

Architect: ARG Creation PVt. LTD. 24 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal

Architect Add. Assistant Engineer

ARG Creation Pvt. Ltd. Surendranagar Municipal Corporation

Assistant Engineer Dy. Executive Engineer

Surendranagar Municipal Corporation Surendranagar Municipal Corporation

Architect: ARG Creation PVt. LTD. 25 of