Construction Work for Civic Center (1) Bhojava and (2) Hasalpur From Viramgam Nagarpalika , Viramgam.

Name of Work :- Construction Work for Civic Center (1) Bhojava and (2) Hasalpur From Viramgam Nagarpalika , Viramgam.

Memorandum showing items works to be carried out :

હાથ ધરવાના કામની બાબતો દર્શાવતી યાદી

Item No. બાબત QuantitiesEstimated Qty. Item Of Work Tendered Rate Unit Total Amount according to estimated

કામ ની બાબત In Figure Rs. Ps

Bhojava Civic Center

1 60.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 117.08 Cu.Mt 7024.80

2 53.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 130.39 Cu.Mt 6910.67

3 4.00 Providing and laying cement concrete 1:4:8(1 cement :4 Coarse sand :8 crushed stone aggregate 40 mm. nominal size) and curing complete including the cost of form work in (A) Foundation and Plinth 2830.46 Cu.Mt 11321.84

4 9.00 Filling in foundation and plinth with murrum or selected brout for out side soil in layers of 20 cm. thickness including watering, ramming and consolidating etc. Complete. 289.06 Cu.Mt 2601.54

5 1.00 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 460.19 Cu.Mt 460.19

6 4.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, (A) Foundations footing base of columns and mass concrete. 4397.50 Cu.Mt 17590.00

7 2.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge,., (D) Coulmns, Pillars, posts and strut upto floor two level. 6255.26 Cu.Mt 12510.52

8 2 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, (C) Ground beam / Plinth Beam 5330.55 Cu.Mt 10661.10

9 2.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, Slab Beam. Up to All Floor. 5647.02 Cu.Mt 11294.04

10 3.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge,. Lintal Up to All Floor. 5330.55 Cu.Mt 15991.65

11 1.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, CHHAJJAS Up to All Floor. 5770.69 Cu.Mt 5770.69

12 5.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, SLABS Up to All Floor. 5138.34 Cu.Mt 25691.72

13 1720.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton) 76.21 Kg 131081.20

14 9.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional 4021.02 Cu.Mt 36189.18

15 20.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) for brick work in superstructure above plinth level upto floor two level (B) Conventional 4295.99 Cu.Mt 85919.80

16 5.00 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth for brick work in superstructure above floor two level (B) Coventional (upto 10 ton) 589.32 Sq.Mt 2946.60

17 31.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 115.81 Sq.Mt 3590.11

18 74.00 Providing 15mm thick cement plaster in single coat on brick/concrete wall for interior polastering up to floor two level and finished even and smooth with n(ii) Cementmortar1:4 (1-cement :4-sand) 157.17 Sq.Mt 11630.58

19 128.00 20 mm. Thick sand faced cement plaster {GUTKA} on walls upto All height above ground level consisting of 12 mm. Thick backing coat of c.m. 1:3 (1 cement : 3 sand) and 8 mm. Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) etc. 300.66 Sq.Mt 38484.48

20 28.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit 1397.83 Sq.Mt 39139.24

21 10.00 Providing and laying Single side mirror polished Black Granite stone slab 18 mm (Average) thick of approved quality incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry including rubbing and polishing etc. complete. 1993.74 Sq.Mt 19937.40

22 105.00 Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall / ceiling surface to give an even shade over and including a primer coat with with alkali resistance primer of approved brand and after thoroughly brushing the surfaceto give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and smooth for Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.Completed as approved by the Architect and Engineer-in-charge, 117.43 Sq.Mt 12330.15

23 128.00 Wall painting two coats with weather proof acralic emulsion APEX paint of approved brand & manufacture and of required shade on exterior wall surface to give an even shade over and including a primery coat with alkaly resistance primer of approved brand after throughly brushing surface to remove all dirt and remains of loose powdered materials etc comp. for all height as approved by the Architect and Engineer-in-charge, 114.53 Sq.Mt 14659.84

24 33.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. 747.29 Sq.Mt 24660.57

25 235.00 Providing and fixing M.S. grills required pattern of window etc. with M.S. flats at required spacing & frame alround square or round bars with round headed bolts & nuts and welding or by screws and including one coat of primer and two coats of oil paintng etc. complete as approved by the Architect and Engineer-in-charge, (A) Plain grill 101.17 Kg 23774.95

26 3.00 Providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50X38.10X1.95mm (of Jindal section no. 2459@ Wt. 1.094 Kg/mt), horizontal three track member size 92mm x 31.75mm x 1.30mm (of Jindal section no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section No. 8947 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm th transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc.Completed as approved by the Architect and Engineer-in-charge, 1713.70 Sq.Mt 5141.10

27 3.00 Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick. Providing for using bright finished M.S. piano hinges of (A) Nickel plated piano hinges. providing vision panel not exceeding 0.1 Sq.M. in all types of flush doors. (A) Rectangular or Square. 2714.14 Sq.Mt 8142.42

28 2.00 Providing and fixing FRP FRAME size 100 x 50mm and 28mm thick FRP depress pannel shutter having extra reinforcement on sides and edges and in gel coat finish. The core of the shutter is to be filled up with injected fire retardent grade polyurethane foam done in situ along with embedded wooden places for stiffening and also for tacking hinges and fixture. The hole FRP frame and shutter is to be water proof, water proof, termite proof and resistance to mild acid/Alkali. Rates are to be inclusive of S.S hinges with necessary screws and Alluminium fixture and fastening.Product should have 3 years prefomance guarantee and company have ISO 9001-2000 certificate. 2377.76 Sq.Mt 4755.52

29 18.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 1054.67 Sqmt 18984.06

30 2.00 Providing and fixing PVC Cowl vent of following dia etc complete as directed (A) 110 mm Dia 521.55 Nos 1043.10

31 1.00 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. screwed down or hinged grating including the cost of cutting and making good the walls. 571.08 Nos 571.08

32 1.00 Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls & bed concrete etc. complete. (I) inside dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line. 2932.93 Nos 2932.93

33 1.00 (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton) 3372.19 Nos 3372.19

34 1.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately) (A) vitreous China Pattern :(i) in white colour 1303.71 Each 1303.71

35 5.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. 186.83 Each 934.15

36 20.00 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (A) 15 mm. 72.65 Rmt 1453.00

37 15.00 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (A) 25 mm. 91.84 Rmt 1377.60

38 10.00 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (A) 50 mm. 195.67 Rmt 1956.70

39 1.00 Providing and fixing S.W. gully trap with grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 1292.19 Nos 1292.19

40 1000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace 3.95 Lit 3950.00

41 1.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour 1414.18 Each 1414.18

42 1.00 WATER COOLERS :- Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. and ISI Certified 54515.76 Each 54515.76

43 28.00 Pro. And fixing single layer water proof gypsum board 12.5mm thick sections using water proof board of size 1220mm x 1830mm x 8.0mm Suspended by GI suspender channel of size 25mm x 3mm with inter mediate channel of size18mm x 40mm x 0.8mm at 1220mm center to center ceiling section of size 40mm x 35mm x 0.55mm at 457mm c/c and perimeter channel A of size 20mm x 27mm x 30mm x 0.5mm at edges & drops incl. paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat, joining compound top coat on ceiling incl.making necy. opening for light fitting, diffuseretc. comp. asperdetail drawingas directed 606.95 Sq.Mt 16994.60

44 4.00 HIGH BACK CHAIR Providing and supplying Revolving High Back Chair (Featherlite Model.No - ERGON) with head rest .Ergonomic design. Knee tilt synchro mechanism with multi position locking arrangement and aluminium die cast arm rest with polished veneer finishing on top of arm rest. Specially designed anti topple aluminium die cast base, class-3 gas lift for seat hight adjustment & glass filed nylon castors for smooth movement,45 DC mouled cusion in seat and back for better comfort. The chair include pneumatic seat height adjustments. The sheet and back should be covered with approved genuine leather and PU leather finish. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. Approved Make :- Featherlite / HOF / GODREJ .As per choice of users department and concern officers in charge & as directed by the EIC. 18685.00 Each 74740.02

45 8.00 VISITOR CHAIR (Executive) CHAIRS WITHOUT REVOLVING (VISITOR'S) Providing and supplying low back chair (without revolving) featherlite Model No. ASTRO Visitor entire frame structure made out with 25 MM Dia CRC tube with 50 Microns Power coated, with 4 pronged fix base as per sample with 40 density U-Foam seat and back covered with good upholstered seat fabric. {The basic rate of fabric not less then Rs. 600 per Rmt. } etc. Unless specified sample. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice of users department and concern officers in charge & as directed by the EIC. 4646.00 Each 37168.00

46 1.00 STORE WELL Supplying and Placing in Position Godrej make store well. This shall have an overall size of 916 mm(W) x 486 mm(D) x 1980 mm(H) with construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Store well should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. {Godrej} As per choice of users department and concern officers in charge & as directed by the EIC. 15080.25 Each 15080.25

47 1.00 PUBLIC SEATING (3-SEATER MS BENCH) Providing, supplying & placing of featherlite make 3 seater public lounge chair, Model.No SJ-708 L , With 2 armrest , cross beam it should be make of poweder coated rectangular tube having size 80MM x 40MM x 2MM. Leg and armrest - these are crome plated made of cold rolled steel SS 202 grade with 2MM thickness armrest and leg is assambled to the cross beam with 2 NOS. M10x100MM bolts. Seat Back Shell is 1.6MM thick preforated sheet SS 202 Grade. The side bar is made of chrome plated solid steel 30 x 12 MM with fluting and plastic inserts. the Shell is assambled on the cross beam. Over all Size 1800MM x 680MM x 410 MM. Height 780 MM x adjustability at foot individual seat with 540MM, Seat height 410 MM, Seat back angle 105* . The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice of users department and concern officers in charge & as directed by the EIC. 9872.75 Each 9872.75

48 4.00 STORAGE RACK Providing & Supplying Files Storage Racks made out by M.S. slotted angle of 40 x 40mm (2.5Kg/pcs.) having size of 2000 X 1200 X 400 mm Depth , with M.S. sheet (3Kg/pcs.) for partitions/shelves - 06 shelves , including Labour, material etc. The quoting price should be inclusive of all types of taxes & duties ,packing, transportation, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. As per choice of users department and concern officers in charge & as directed by the EIC. 2555.30 Each 10221.20

49 1.00 NOTICE BOARD WITH GLASS DOOR Providing & Supplying Notice Board with Glass door for display purpose with locking mechanism, having size of 1600 (L) X 1200 (W) X 100 (D) mm, made up of powder coated steel structure with glass in door with locking facility, etc. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. (Make :- Title Display / Scholar) As per choice of users department and concern officers in charge & as directed by the EIC. 4734.38 Each 4734.38

50 4.00 PRINCIPAL TABLE Providing & Supplying wooden table having size 1450mm X 600mm X 750mm (H). The entire structure should be made with 38/25/18 mm IS 710 ply wherever required as per drawings. Finished with 4mm thk veneer finish & with matching wooden beading. Applying lamination polishing on the top of the table, and modestry panel with smooth duco paint. All internal closed surfaces to be covered with 4.0 mm thk veneer finish. All wooden surface to be finished in monocoat polish. Rates to include all necessary hardware and accessories. The quoting price should be inclusive of all types of taxes & duties, packing, forwarding, loading, unloading, installaion. As per detail drawing & choice of users department and Concern officers in charge as directed by the EIC. 18656.72 Each 74626.88

51 4.00 Helping Borad 2.0x2.0 FT acrylic sheet in Word Decide By Nagarpalika Authority Person And Labour Work ETC. 1515.00 Nos 6060.00

52 4.00 hp Intel Core i3-1 2100T All in One PC 50494.95 Each 201979.80

53 2.00 brother A4 and Legal Monochrome (Black)Laser C omputer Printer brother R (HL L5000D with 2 Years Warranty) 21634.20 Each 43268.40

54 200.00 POLYCAB Single mode OS2 HDPE Fibre Cable For Networking 95.95 Rmt 19190.00

55 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III 582.77 Pt. 11655.40

56 6.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III 809.01 Pt. 4854.06

57 10.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby (h) with oval conduit /PVC casing capping double lock type erected concealed in wall/ceiling completeswitchboard/mcb db board 780.73 Pt. 7807.30

58 6.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(h) with oval conduit /PVC casing capping double lock type erected concealed in wall/ceiling completeCATIII 970.61 Pt. 5823.66

59 6.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories catIII 309.06 Pt. 1854.36

60 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (C) With oval conduit /PVC casing capping double lock type 0.00

61 6.00 Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling.(14) Electronic Hum free EME Socket Type Steps Fan Regulator 219.17 Each 1315.02

62 6.00 Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected with necessary connections as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories CATII 1133.22 Each 6799.32

63 6.00 FLUORESCENT TUBES Approved make fluorescent tube 120cms. 18/20 watt erected, if required.CATIII 51.51 Each 309.06

64 2.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.Cat.III 329.26 Each 658.52

65 6.00 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge] 1596.81 Each 9580.86

66 2.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark CATIII 123.22 Each 246.44

67 2.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) single phase incoming and horizontal single phase outgoing(a) single door (IP-30) 8WAY 702.96 Each 1405.92

68 1.00 Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For panel) 823.15 Each 823.15

69 4.00 Providing and erecting out door type halogen fitting made from cast alloys with electro- chemically polished Aluminium reflector complete with tuffend glass, silicon gasket with Halogen tube of following size (B) With 1000 watt Halogen Tube Cat.III 1472.58 Each 5890.32

70 1.00 upply, installation, testing, and commissioning of 42" (106 cm) Smart Full HD LED Television with A+ Grade panel, minimum 1920x1080 resolution, built-in Wi-Fi, Ethernet (RJ45), minimum 2x HDMI, 1x USB ports, minimum 20W Dolby Audio output, Android/Google TV OS, screen mirroring; complete with OEM remote, batteries, power cord, heavy-duty wall-mount bracket, and standard base stand; including on-site delivery, physical wall mounting, and a minimum 1-year comprehensive OEM warranty. 32825.00 Each 32825.00

71 1.00 Meter Fixing Charge 8997.58 Each 8997.58

Hasanlpur Civic Center

1 60.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 117.08 Cu.Mt 7024.80

2 53.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 130.39 Cu.Mt 6910.67

3 4.00 Providing and laying cement concrete 1:4:8(1 cement :4 Coarse sand :8 crushed stone aggregate 40 mm. nominal size) and curing complete including the cost of form work in (A) Foundation and Plinth 2830.46 Cu.Mt 11321.84

4 9.00 Filling in foundation and plinth with murrum or selected brout for out side soil in layers of 20 cm. thickness including watering, ramming and consolidating etc. Complete. 289.06 Cu.Mt 2601.54

5 1.00 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 460.19 Cu.Mt 460.19

6 4.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, (A) Foundations footing base of columns and mass concrete. 4397.50 Cu.Mt 17590.00

7 2.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge,., (D) Coulmns, Pillars, posts and strut upto floor two level. 6255.26 Cu.Mt 12510.52

8 2 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, (C) Ground beam / Plinth Beam 5330.55 Cu.Mt 10661.10

9 2.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, Slab Beam. Up to All Floor. 5647.02 Cu.Mt 11294.04

10 3.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge,. Lintal Up to All Floor. 5330.55 Cu.Mt 15991.65

11 1.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, CHHAJJAS Up to All Floor. 5770.69 Cu.Mt 5770.69

12 5.00 Providing & laying in position controlled reinforced cement concrete M- 200 and curing complete including cost of form work and excluding cost of reinforcement in reinforced concret for following grades, machined batched & machine vibrated design mix concrete using graded hard (black trap) stone aggregate of 20mm nominal size obtained from quarry including mechanical mixing, mechanical vibrating, compaction, finishing, curing Completed as approved by the Architect and Engineer-in-charge, SLABS Up to All Floor. 5138.34 Cu.Mt 25691.72

13 1720.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton) 76.21 Kg 131081.20

14 9.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional 4021.02 Cu.Mt 36189.18

15 20.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) for brick work in superstructure above plinth level upto floor two level (B) Conventional 4295.99 Cu.Mt 85919.80

16 5.00 (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth for brick work in superstructure above floor two level (B) Coventional (upto 10 ton) 589.32 Sq.Mt 2946.60

17 31.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 115.81 Sq.Mt 3590.11

18 74.00 Providing 15mm thick cement plaster in single coat on brick/concrete wall for interior polastering up to floor two level and finished even and smooth with n(ii) Cementmortar1:4 (1-cement :4-sand) 157.17 Sq.Mt 11630.58

19 128.00 20 mm. Thick sand faced cement plaster {GUTKA} on walls upto All height above ground level consisting of 12 mm. Thick backing coat of c.m. 1:3 (1 cement : 3 sand) and 8 mm. Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) etc. 300.66 Sq.Mt 38484.48

20 28.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit 1397.83 Sq.Mt 39139.24

21 10.00 Providing and laying Single side mirror polished Black Granite stone slab 18 mm (Average) thick of approved quality incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry including rubbing and polishing etc. complete. 1993.74 Sq.Mt 19937.40

22 105.00 Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall / ceiling surface to give an even shade over and including a primer coat with with alkali resistance primer of approved brand and after thoroughly brushing the surfaceto give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and smooth for Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.Completed as approved by the Architect and Engineer-in-charge, 117.43 Sq.Mt 12330.15

23 128.00 Wall painting two coats with weather proof acralic emulsion APEX paint of approved brand & manufacture and of required shade on exterior wall surface to give an even shade over and including a primery coat with alkaly resistance primer of approved brand after throughly brushing surface to remove all dirt and remains of loose powdered materials etc comp. for all height as approved by the Architect and Engineer-in-charge, 114.53 Sq.Mt 14659.84

24 33.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. 747.29 Sq.Mt 24660.57

25 235.00 Providing and fixing M.S. grills required pattern of window etc. with M.S. flats at required spacing & frame alround square or round bars with round headed bolts & nuts and welding or by screws and including one coat of primer and two coats of oil paintng etc. complete as approved by the Architect and Engineer-in-charge, (A) Plain grill 101.17 Kg 23774.95

26 3.00 Providing and fixing window having extruded aluminum colour anodized section frame main outer size 63.50X38.10X1.95mm (of Jindal section no. 2459@ Wt. 1.094 Kg/mt), horizontal three track member size 92mm x 31.75mm x 1.30mm (of Jindal section no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section No. 8947 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm th transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc.Completed as approved by the Architect and Engineer-in-charge, 1713.70 Sq.Mt 5141.10

27 3.00 Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick. Providing for using bright finished M.S. piano hinges of (A) Nickel plated piano hinges. providing vision panel not exceeding 0.1 Sq.M. in all types of flush doors. (A) Rectangular or Square. 2714.14 Sq.Mt 8142.42

28 2.00 Providing and fixing FRP FRAME size 100 x 50mm and 28mm thick FRP depress pannel shutter having extra reinforcement on sides and edges and in gel coat finish. The core of the shutter is to be filled up with injected fire retardent grade polyurethane foam done in situ along with embedded wooden places for stiffening and also for tacking hinges and fixture. The hole FRP frame and shutter is to be water proof, water proof, termite proof and resistance to mild acid/Alkali. Rates are to be inclusive of S.S hinges with necessary screws and Alluminium fixture and fastening.Product should have 3 years prefomance guarantee and company have ISO 9001-2000 certificate. 2377.76 Sq.Mt 4755.52

29 18.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 1054.67 Sqmt 18984.06

30 2.00 Providing and fixing PVC Cowl vent of following dia etc complete as directed (A) 110 mm Dia 521.55 Nos 1043.10

31 1.00 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. screwed down or hinged grating including the cost of cutting and making good the walls. 571.08 Nos 571.08

32 1.00 Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, total weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls & bed concrete etc. complete. (I) inside dimensions, 455 mm. x 610 mm. And 450 mm. Deep for single pipe line. 2932.93 Nos 2932.93

33 1.00 (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton) 3372.19 Nos 3372.19

34 1.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately) (A) vitreous China Pattern :(i) in white colour 1303.71 Each 1303.71

35 5.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. 186.83 Each 934.15

36 20.00 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (A) 15 mm. 72.65 Rmt 1453.00

37 15.00 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (A) 25 mm. 91.84 Rmt 1377.60

38 10.00 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. (A) 50 mm. 195.67 Rmt 1956.70

39 1.00 Providing and fixing S.W. gully trap with grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 1292.19 Nos 1292.19

40 1000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace 3.95 Lit 3950.00

41 1.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour 1414.18 Each 1414.18

42 1.00 WATER COOLERS :- Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. and ISI Certified 54515.76 Each 54515.76

43 28.00 Pro. And fixing single layer water proof gypsum board 12.5mm thick sections using water proof board of size 1220mm x 1830mm x 8.0mm Suspended by GI suspender channel of size 25mm x 3mm with inter mediate channel of size18mm x 40mm x 0.8mm at 1220mm center to center ceiling section of size 40mm x 35mm x 0.55mm at 457mm c/c and perimeter channel A of size 20mm x 27mm x 30mm x 0.5mm at edges & drops incl. paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat, joining compound top coat on ceiling incl.making necy. opening for light fitting, diffuseretc. comp. asperdetail drawingas directed 606.95 Sq.Mt 16994.60

44 4.00 HIGH BACK CHAIR Providing and supplying Revolving High Back Chair (Featherlite Model.No - ERGON) with head rest .Ergonomic design. Knee tilt synchro mechanism with multi position locking arrangement and aluminium die cast arm rest with polished veneer finishing on top of arm rest. Specially designed anti topple aluminium die cast base, class-3 gas lift for seat hight adjustment & glass filed nylon castors for smooth movement,45 DC mouled cusion in seat and back for better comfort. The chair include pneumatic seat height adjustments. The sheet and back should be covered with approved genuine leather and PU leather finish. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. Approved Make :- Featherlite / HOF / GODREJ .As per choice of users department and concern officers in charge & as directed by the EIC. 18685.00 Each 74740.02

45 8.00 VISITOR CHAIR (Executive) CHAIRS WITHOUT REVOLVING (VISITOR'S) Providing and supplying low back chair (without revolving) featherlite Model No. ASTRO Visitor entire frame structure made out with 25 MM Dia CRC tube with 50 Microns Power coated, with 4 pronged fix base as per sample with 40 density U-Foam seat and back covered with good upholstered seat fabric. {The basic rate of fabric not less then Rs. 600 per Rmt. } etc. Unless specified sample. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice of users department and concern officers in charge & as directed by the EIC. 4646.00 Each 37168.00

46 1.00 STORE WELL Supplying and Placing in Position Godrej make store well. This shall have an overall size of 916 mm(W) x 486 mm(D) x 1980 mm(H) with construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Store well should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. {Godrej} As per choice of users department and concern officers in charge & as directed by the EIC. 15080.25 Each 15080.25

47 1.00 PUBLIC SEATING (3-SEATER MS BENCH) Providing, supplying & placing of featherlite make 3 seater public lounge chair, Model.No SJ-708 L , With 2 armrest , cross beam it should be make of poweder coated rectangular tube having size 80MM x 40MM x 2MM. Leg and armrest - these are crome plated made of cold rolled steel SS 202 grade with 2MM thickness armrest and leg is assambled to the cross beam with 2 NOS. M10x100MM bolts. Seat Back Shell is 1.6MM thick preforated sheet SS 202 Grade. The side bar is made of chrome plated solid steel 30 x 12 MM with fluting and plastic inserts. the Shell is assambled on the cross beam. Over all Size 1800MM x 680MM x 410 MM. Height 780 MM x adjustability at foot individual seat with 540MM, Seat height 410 MM, Seat back angle 105* . The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. Approved Make :- Featherlite / Bluebell / Godrej. As per choice of users department and concern officers in charge & as directed by the EIC. 9872.75 Each 9872.75

48 4.00 STORAGE RACK Providing & Supplying Files Storage Racks made out by M.S. slotted angle of 40 x 40mm (2.5Kg/pcs.) having size of 2000 X 1200 X 400 mm Depth , with M.S. sheet (3Kg/pcs.) for partitions/shelves - 06 shelves , including Labour, material etc. The quoting price should be inclusive of all types of taxes & duties ,packing, transportation, forwarding, loading, unloading, installaion. Supplied strictly as per our technical specifications and make. As per choice of users department and concern officers in charge & as directed by the EIC. 2555.30 Each 10221.20

49 1.00 NOTICE BOARD WITH GLASS DOOR Providing & Supplying Notice Board with Glass door for display purpose with locking mechanism, having size of 1600 (L) X 1200 (W) X 100 (D) mm, made up of powder coated steel structure with glass in door with locking facility, etc. The quoting price should be inclusive of all types of taxes & duties ,packing, forwarding, loading, unloading, installaion. (Make :- Title Display / Scholar) As per choice of users department and concern officers in charge & as directed by the EIC. 4734.38 Each 4734.38

50 4.00 PRINCIPAL TABLE Providing & Supplying wooden table having size 1450mm X 600mm X 750mm (H). The entire structure should be made with 38/25/18 mm IS 710 ply wherever required as per drawings. Finished with 4mm thk veneer finish & with matching wooden beading. Applying lamination polishing on the top of the table, and modestry panel with smooth duco paint. All internal closed surfaces to be covered with 4.0 mm thk veneer finish. All wooden surface to be finished in monocoat polish. Rates to include all necessary hardware and accessories. The quoting price should be inclusive of all types of taxes & duties, packing, forwarding, loading, unloading, installaion. As per detail drawing & choice of users department and Concern officers in charge as directed by the EIC. 18656.72 Each 74626.88

51 4.00 Helping Borad 2.0x2.0 FT acrylic sheet in Word Decide By Nagarpalika Authority Person And Labour Work ETC. 1515.00 Nos 6060.00

52 4.00 hp Intel Core i3-1 2100T All in One PC 50494.95 Each 201979.80

53 2.00 brother A4 and Legal Monochrome (Black)Laser C omputer Printer brother R (HL L5000D with 2 Years Warranty) 21634.20 Each 43268.40

54 200.00 POLYCAB Single mode OS2 HDPE Fibre Cable For Networking 95.95 Rmt 19190.00

55 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III 582.77 Pt. 11655.40

56 6.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III 809.01 Pt. 4854.06

57 10.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby (h) with oval conduit /PVC casing capping double lock type erected concealed in wall/ceiling completeswitchboard/mcb db board 780.73 Pt. 7807.30

58 6.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(h) with oval conduit /PVC casing capping double lock type erected concealed in wall/ceiling completeCATIII 970.61 Pt. 5823.66

59 6.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories catIII 309.06 Pt. 1854.36

60 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (C) With oval conduit /PVC casing capping double lock type 0.00

61 6.00 Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling.(14) Electronic Hum free EME Socket Type Steps Fan Regulator 219.17 Each 1315.02

62 6.00 Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected with necessary connections as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories CATII 1133.22 Each 6799.32

63 6.00 FLUORESCENT TUBES Approved make fluorescent tube 120cms. 18/20 watt erected, if required.CATIII 51.51 Each 309.06

64 2.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.Cat.III 329.26 Each 658.52

65 6.00 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge] 1596.81 Each 9580.86

66 2.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark CATIII 123.22 Each 246.44

67 2.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) single phase incoming and horizontal single phase outgoing(a) single door (IP-30) 8WAY 702.96 Each 1405.92

68 1.00 Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For panel) 823.15 Each 823.15

69 4.00 Providing and erecting out door type halogen fitting made from cast alloys with electro- chemically polished Aluminium reflector complete with tuffend glass, silicon gasket with Halogen tube of following size (B) With 1000 watt Halogen Tube Cat.III 1472.58 Each 5890.32

70 1.00 upply, installation, testing, and commissioning of 42" (106 cm) Smart Full HD LED Television with A+ Grade panel, minimum 1920x1080 resolution, built-in Wi-Fi, Ethernet (RJ45), minimum 2x HDMI, 1x USB ports, minimum 20W Dolby Audio output, Android/Google TV OS, screen mirroring; complete with OEM remote, batteries, power cord, heavy-duty wall-mount bracket, and standard base stand; including on-site delivery, physical wall mounting, and a minimum 1-year comprehensive OEM warranty. 32825.00 Each 32825.00

71 1.00 Meter Fixing Charge 8997.58 Each 8997.58

TOTAL NET AMOUNT 2638347.40

Estimated amount Estimated amount

Put to tender Rs ……............. Put to tender Rs……............

Deduct .............% below Rs………… Add............% above Rs……………

Total Rs………… Total Rs……………

(*Please strike out whichever is not applicable).

Note : 1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

GM\Wv! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0JLhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Note : 2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under this signature.

GM\W o Z VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJLP

Note : 3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture, weather etc.

GM\Wv# o 8F\S[,F NZDF\4 :Y/GL sSFDGF VFZ\E[ VG[ 5}~ YFI T[ JBT[fNZ[S ZLT[ ;FO;}OL SZJFGM\ ;DFJ[X YFI K[4 VG[ T[ NZ TDFD 5lZl:YlT4 :Y/4 E[H4 CJFDFG JU[Z[ C[9/ SFD VD,DF\ ZC[X[P

Note : 4 To be continued on additional sheets, if found necessary.

GM\Wv$ o H~Z H6FI JWFZFGF SFU/M HM0L RF,]\ ZFBJ]\P

Viramgam Nagarpalika