Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical As per TEC |
| 2 | Accepted-Technical | Accepted-Technical As per TEC |
| 3 | Accepted-Technical | Accepted-Technical As per TEC |
Tender Value
₹7.8 L
EMD Value
₹16,000
Closing Date
5 Nov 2026, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Senior Manager
RO Amaravati
Supply Installing of Old Pota Cabin New Pota Cabin for office Block at CW Adoni AP
2026_CWC_296543_1
CWC/RO-Engg. /AMRVT/NIQ-10/2026-27/
Open Tender
Civil Works
Works
30 days
CW Adoni
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
Central Warehousing Corporation
₹16,000
17 Nov 2026
31 Oct 2026
6 Nov 2026
31 Oct 2026
5 Nov 2026
31 Oct 2026
90 days
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a)All kinds of soil
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal outer dia. Pipes.
Providing & placing on terrace ( at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet, and overflow pipes but without fittings and the base support for tank.
Description
Providing, supplying, transporting, installing and fixing of GI Portable Office Cabin of size 10.00 ft × 25.00 ft × 8.60 ft (approximately 250 Sft), complete in all respects, including all materials, labour, fabrication, transportation, erection, fixing, testing and commissioning, comprising MS structural framework with bottom frame of 100 × 50 mm MS square pipe, 3 mm thick; top frame of 50 × 50 mm MS square pipe, 1.8 mm thick; bottom stiffeners of 100 × 50 mm MS square pipe, 3 mm thick, 80 × 40 mm MS square pipe, 2.5 mm thick and 50 × 50 mm MS square pipe, 1.8 mm thick; top stiffeners of 50 × 50 mm, 50 × 25 mm and 25 × 25 mm MS square pipes, 1.8 mm thick; side posts of 65 × 65 mm and 50 × 25 mm MS square pipes, 1.8 mm thick, all ISI marked; side walls and roof covered with 1.2 mm thick GI sheet, JSW make/equivalent as approved by EIC, properly sloped and watertight; 50 mm thick glass wool insulation of density 48 kg/m³ in side walls and ceiling; internal wall paneling with 9 mm thick MDF board of Greenply/Greenpanel/equivalent as approved by EIC make with aluminium sections/angles at all vertical and horizontal joints; false ceiling with 9 mm thick MDF board, Greenply/Greenpanel/equivalent as approved by EIC make, including aluminium sections/angles; three numbers double-shutter sliding UPVC windows of size approximately 3.00 ft × 3.00 ft, powder-coated Jindal/equivalent as approved by EIC make, with 1.2 mm thick sections, 4 mm thick Saint-Gobain/equivalent as approved by EIC glass, external safety grills and canopies; one external opening type main door of size approximately 6.50 ft × 3.00 ft, made of material matching the wall panels, with 25 × 25 mm tubular pipe frame of 1.5 mm thickness, MS aldrop and canopy; flooring with 18 mm thick cemented board of Birla Aerocon/equivalent as approved by EIC make fixed with self-tapping screws and finished with 0.65 mm thick vinyl flooring/carpet, water-resistant and termite-resistant; cleaning, treatment and application of anti-rust primer and high-performance epoxy paint to all structural surfaces; four numbers MS lifting hooks for lifting and shifting of cabin; internal partition of approximately 10.00 ft × 8.00 ft including suitable framing and wooden door; two numbers inbuilt toilet units of approximately 5.00 ft × 5.00 ft each, including EWC, flush tank, jet spray, exhaust fan, water tap, wash basin, vinyl/carpet flooring, internal ACP sheet paneling and all necessary sanitary, plumbing, fixing and finishing accessories; complete concealed electrical wiring with PVC insulated copper wires suitable for 240 V, 50 Hz, single-phase AC supply, including 8 numbers 15 W LED lights, 2 numbers 300 mm cabin fans, 2 numbers exhaust fans, 1 number external bulkhead light, 12 numbers 6 A switches and sockets, 2 numbers 16 A AC provisions with separate MCBs, 3 numbers internal electrical switchboards, 1 number external 32 A main switch with MCB and single-phase wiring, necessary electrical accessories and 1 number earthing point; provision for 500 litre capacity water tank; transportation of the complete cabin to site and placement at designated location; including all nuts, bolts, screws, welding electrodes, fasteners, fixtures, hardware, sealants, finishing materials and all incidental works necessary for complete and satisfactory installation, making the portable office cabin fully functional and ready for occupation, all complete as per the approved specifications, manufacturer's specifications and directions of the Engineer-in-Charge.
Shifting of the existing old office container from CW, Kadapa to CW, Adoni as per the instructions of the Engineering in charge, including dismantling/disconnection of existing services wherever required, safe lifting, loading, transportation, unloading, shifting and placing at the designated location, proper positioning, levelling, alignment and fixing/anchoring of the container securely at site, including all necessary labour, tools, tackles, lifting equipment, transportation arrangements and minor associated works, complete in all respects as per site requirements and instructions of the Engineering in charge.
Repair to the existing old office container, including repair of damaged/deteriorated MS frame and structural members by cutting, welding, strengthening and replacement of damaged portions wherever required, rectification of damaged wall/roof panels, doors, windows, frames, hinges, locks and other fittings, sealing of gaps and joints, minor fabrication and fixing works, and any other incidental/minor repair works required for restoring the container to proper usable condition, including all necessary materials, labour, tools, tackles, welding equipment, cutting, lifting, fixing and finishing works, complete in all respects as per site conditions and instructions of the Engineer-in-Charge/Competent Authority.
Description
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Description
Supply & testing of XLPE insulated aluminium conductor steel armoured power cable of 1.1 KV grade confirming to IS :7089 (part 1) 1988 or latest amendment and as per instructions of official-in-charge. 4 X 10 sq. mm.
Total Amount (in Rs.)
Total Amount (in Rs.)
Total Amount (in Rs.)
Total Amount (in Rs.)
Items of works
All Items of Civil works based on DSR 2023
All Items of Civil Market Rate
All Items of Electrical works based on DSR 2025
All Items of Electrical Market Rate
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.53 MB
PriceBid.xls
Other Document • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .