C/O path from hand pump towards village part-I in ward No. 9.

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. Pick Work.& Jumper Work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Stone filling behind retaining walls including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for in situ-reinforced concrete & plain concrete work in:vertical surfacesand breaks in floors and walls for any thickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement: 6 Sand: 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (1 cement:2sand:4graded stone aggregate 20mm nominal size) excluding cost of centring and shuttering in: Foundations and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement: 4 Sand: 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing Weep hole in brick masonary/stone/Plain reinforced concrete abutment wing wall with 100 mm dia. PVC pipe extended the full width of the structure with slope i including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paintIn grating,Framed guards, bars,ledders railings,brackets & similar works including carriage of material in all leads and lift and direction of Engineer-in-charge.

sunil Kumar chandel

anuj gupta

Jitender Singh

Vinod Kumar