Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹3.1 L+₹30,880.35 (11.1%)Rejected-Finance | L2 | Rejected-Finance Higher rate and hence not admitted | |
| 3 | L3₹3.1 L+₹31,215.36 (11.2%)Rejected-Finance | L3 | Rejected-Finance Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | PRAJIL K L2 | Dileep Kumar C K L3 | NISHA DINESH L1 |
|---|---|---|---|---|---|---|
| 1.00203/25-26 | ||||||
| 1.00 | OD135179/2025-2026:Providing and laying 60mm thick factory made cement concrete interlocking paver block made by block machine with
strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including
50mm thick compacted bed of stone aggregate 6mm nominal size filling the joints with fine sand etc. all complete as
per the direction of Engineer-in-charge. vertically including cost and conveyance of all materials all labour charges,
fabricating etc. complete. (Modified 16.68 by replacing Sand bed 6mm stone aggregate bed) | 91.2 | sqm | 1,005.78 ₹91,727.14 | 1,006.88 ₹91,827.46 | 986.44 ₹89,963.33 Lowest |
| 1.00 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.19 | cum | 7,278.05 ₹1,375.55 | 7,286.08 ₹1,377.07 | 7,138.09 ₹1,349.1 Lowest |
| 1.00 | OD135178/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)
0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches
during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch
in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | 81.35 | sqm | 490.03 ₹39,863.94 | 490.56 ₹39,907.06 | 480.6 ₹39,096.81 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 706.49 | kg | 158.87 ₹1,12,240.7 | 159.04 ₹1,12,360.81 | 120.5 ₹85,132.53 Lowest |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.64 | cum | 305.52 ₹501.05 | 305.86 ₹501.61 | 299.65 ₹491.43 Lowest |
| 1.01 | OD135583/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in dry masonry for foundation and basement including all cost of materials, labour charges etc. (MOD 50.6.7.1 of DAR ) | 1.64 | cum | 5,005.39 ₹8,208.84 | 5,010.89 ₹8,217.86 | 4,909.13 ₹8,050.97 Lowest |
| 1.01 | OD162151/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for superstructure above plinth level up to floor two level including all cost of materials, labour charges etc. | 1.94 | cum | 6,660.85 ₹12,948.69 | 6,668.16 ₹12,962.9 | 6,532.75 ₹12,699.67 Lowest |
| 1.01 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 34.34 | kg | 462.21 ₹15,872.29 | 462.72 ₹15,889.8 | 453.32 ₹15,567.01 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 11.57 | sqm | 1,086.14 ₹12,566.64 | 1,087.37 ₹12,580.87 | 1,065.25 ₹12,324.94 Lowest |
Tender Value
₹3.4 L
EMD Value
₹8,471
Closing Date
11 Oct 2025, 5:00 pmClosed
MANJESHKAR P S
Office of the Assistant Engineer, LID EW Section,MALOOR GP
Proj no 203/25-26 INTERLOCKING AND SHEET WORKS TO TAKE A BREAK BUILDING
2025_LSGD_804475_8
AE/LIDEW/MLR/ET-6/25-26
Open Tender
Civil Works - Roads
Item Rate
180 days
MALOOR GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹750
Yes
₹8,471
Yes
22 May 2026
4 Oct 2025
14 Oct 2025
4 Oct 2025
11 Oct 2025
4 Oct 2025
Amount
OD135179/2025-2026:Providing and laying 60mm thick factory made cement concrete interlocking paver block made by block machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of stone aggregate 6mm nominal size filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. vertically including cost and conveyance of all materials all labour charges, fabricating etc. complete. (Modified 16.68 by replacing Sand bed 6mm stone aggregate bed)
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
OD135178/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR )
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD135583/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in dry masonry for foundation and basement including all cost of materials, labour charges etc. (MOD 50.6.7.1 of DAR )
OD162151/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for superstructure above plinth level up to floor two level including all cost of materials, labour charges etc.
21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
PRAJIL K (BID ID -2382940)
Dileep Kumar C K (BID ID -2383391)
Bidder Name
Dileep Kumar C K
PRAJIL K
NISHA DINESH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
Tendernotice_2.pdf
PDF • 0.03 MB
Tendernotice_3.pdf
PDF • 0.02 MB
pa.pdf
Tender Documents • 0.12 MB
sbd.pdf
Tender Documents • 1.05 MB
BOQ_1338644.xls
BOQ • 0.31 MB
aff.pdf
Tender Documents • 0.11 MB
fot.pdf
Tender Documents • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .