REPAIR/REPLACEMENT OF OLD UNSERVECEABLE, RUSTED LT FEEDER PANEL BOXES AT VARIOUS LOCATION AT DEFENCE LABORATORY JODHPUR

Amount

Taking down old unserviceable existing LT panel board and supplying, installing, testing and commissioning of panel board, outdoor cubical type KIOSK factory made (CPRI approved) double door type on front & back side openable with locking arrangement, main panel board fabricated out of CRCA MS sheet 3.15 mm thick, 40 x 40 x 6 mm angle iron and Tee section frame, dust and vermin proof, complete with Aiuminium bus bar 4 Nos, 300 Amps capacity in horizontal position mounted on porcelain insulators, totally enclosed, chamber for protection 3 phase 440 volt with suitable size of PVC insulated copper cable control wiring duly mounted on PCC (1:2:4) foundation/platform of height 450mm with suitable size of bolts, nuts & wahsers. The panel board shall be powder coated with smoke gray synthetic enamel paint over a coat of red oxide zink chrome primer complete including the followings :- INCOMING :- MCCB, 415 volt, 200 Amps, 4 pole, 36 KA - 01 No (incoming) with digital Volt meter 0 - 500 volt-01 Nos ,digital Amp meter 0 - 500 Amps with CT's - 01 set OUTGOING:- (i) MCCB, 415 volt, 100 Amps, 4 pole, 25 KA - 02 Nos (outgoing) (ii) power contractor 4pole 63 amp 415 V-01 nos (iii) timer switch 0-24 hours for automatic opration single phase-01 nos (iv) digital Volt meter 0 - 500 volt - 01 , Digital Amp meter 0 - 500 Amps with inbuilt CT's - 01 set,three phase indicating lamp complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable existing LT panel board and supplying, installing, testing and commissioning of panel board, outdoor cubical type KIOSK factory made (CPRI approved) double door type on front & back side openable with locking arrangement, main panel board fabricated out of CRCA MS sheet 3.15 mm thick, 40 x 40 x 6 mm angle iron and Tee section frame, dust and vermin proof, complete with Aiuminium bus bar 4 Nos, 400 Amps capacity in horizontal position mounted on porcelain insulators, totally enclosed, chamber for protection 3 phase 440 volt with suitable size of PVC insulated copper cable control wiring duly mounted on PCC (1:2:4) foundation/platform of height 450mm with suitable size of bolts, nuts & wahsers. The panel board shall be powder coated with smoke gray synthetic enamel paint over a coat of red oxide zink chrome primer complete including the followings :- INCOMING :- MCCB, 415 volt, 250 Amps, 4 pole, 25 KA - 01 No (incoming) with digital Volt meter 0 - 500 volt-01 Nos ,digital Amp meter 0 - 500 Amps with in-built CT's - 01 set OUTGOING:-(i) MCCB, 415 volt, 125 Amps, 4 pole, 25 KA - 02 (ii) 4 pole power contactor 63 Amps,415 Volts-01 (iii) timer switch 0-24 hours for automatic opration single phase-01 nos (iv) digital Volt meter 0 - 500 volt - 01 (v) Digital Amp meter 0 - 500 Amps with in-built CT's - 01 set (vi)Three phase indicating lamp complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable existing LT panel board and supplying, installing, testing and commissioning of panel board, outdoor cubical type KIOSK factory made (CPRI approved) double door type on front & back side openable with locking arrangement, main panel board fabricated out of CRCA MS sheet 3.15 mm thick, 40 x 40 x 6 mm angle iron and Tee section frame, dust and vermin proof, complete with Aiuminium bus bar 4 Nos, 600 Amps capacity in horizontal position mounted on porcelain insulators, totally enclosed, chamber for protection 3 phase 440 volt with suitable size of PVC insulated copper cable control wiring duly mounted on PCC (1:2:4) foundation/platform of height 450mm with suitable size of bolts, nuts & wahsers. The panel board shall be powder coated with smoke gray synthetic enamel paint over a coat of red oxide zink chrome primer complete including the followings :- INCOMING :- MCCB, 415 volt, 400 Amps, 4 pole, 36 KA - 01 No (incoming) with digital Volt meter 0 - 500 volt-01 Nos ,digital Amp meter 0 - 500 Amps with in-built CT's - 01 set OUTGOING:-(i) MCCB, 415 volt, 125 Amps, 4 pole, 25 KA - 01 (ii) MCCB, 415 volt, 100 Amps, 4 pole, 25 KA - 02 Nos (outgoing) (iii) MCCB, 415 volt, 63 Amps, 4 pole, 16 KA - 01 Nos (outgoing)(iv) 4 pole power contactor 63 Amps,415 Volts-01 (v) timer switch 0-24 hours for automatic opration single phase-01 nos (vi) digital Volt meter 0 - 500 volt - 01 (vii) Digital Amp meter 0 - 500 Amps with in-built CT's - 01 set (viii)Three phase indicating lamp complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable existing LT panel board and supplying, installing, testing and commissioning of panel board, outdoor cubical type KIOSK factory made (CPRI approved) double door type on front & back side openable with locking arrangement, main panel board fabricated out of CRCA MS sheet 3.15 mm thick, 40 x 40 x 6 mm angle iron and Tee section frame, dust and vermin proof, complete with Aiuminium bus bar 4 Nos, 600 Amps capacity in horizontal position mounted on porcelain insulators, totally enclosed, chamber for protection 3 phase 440 volt with suitable size of PVC insulated copper cable control wiring duly mounted on PCC (1:2:4) foundation/platform of height 450mm with suitable size of bolts, nuts & wahsers. The panel board shall be powder coated with smoke gray synthetic enamel paint over a coat of red oxide zink chrome primer complete including the followings :- INCOMING :- MCCB, 415 volt, 400 Amps, 4 pole, 36 KA - 01 No (incoming) with digital Volt meter 0 - 500 volt-01 Nos ,digital Amp meter 0 - 500 Amps with in-built CT's - 01 set OUTGOING:-(i) MCCB, 415 volt, 125 Amps, 4 pole, 25 KA - 01 (ii) MCCB, 415 volt, 100 Amps, 4 pole, 25 KA - 02 Nos (outgoing) (iii) MCCB, 415 volt, 63 Amps, 4 pole, 16 KA - 01 Nos (outgoing)(iv) 4 pole power contactor 63 Amps,415 Volts-01 (v) timer switch 0-24 hours for automatic opration single phase-01 nos (vi) digital Volt meter 0 - 500 volt - 01 (vii) Digital Amp meter 0 - 500 Amps with in-built CT's - 01 set (viii)Three phase indicating lamp complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable existing LT panel board and supplying, installing, testing and commissioning of panel board, outdoor cubical type KIOSK factory made (CPRI approved) double door type on front & back side openable with locking arrangement, main panel board fabricated out of CRCA MS sheet 3.15 mm thick, 40 x 40 x 6 mm angle iron and Tee section frame, dust and vermin proof, complete with Aiuminium bus bar 4 Nos, 400 Amps capacity in horizontal position mounted on porcelain insulators, totally enclosed, chamber for protection 3 phase 440 volt with suitable size of PVC insulated copper cable control wiring duly mounted on PCC (1:2:4) foundation/platform of height 450mm with suitable size of bolts, nuts & wahsers. The panel board shall be powder coated with smoke gray synthetic enamel paint over a coat of red oxide zink chrome primer complete including the followings :- INCOMING :- MCCB, 415 volt, 250 Amps, 4 pole, 36 KA - 01 No (incoming) with digital Volt meter 0 - 500 volt-01 Nos ,digital Amp meter 0 - 500 Amps with in-built CT's - 01 set OUTGOING:-(i) MCCB, 415 volt, 100 Amps, 4 pole, 25 KA - 01 (ii) MCCB, 415 volt, 63 Amps, 4 pole, 16 KA - 02 Nos (outgoing) (iii) 4 pole power contactor 63 Amps,415 Volts-01 (iv) timer switch 0-24 hours for automatic opration single phase-01 nos (v) digital Volt meter 0 - 500 volt - 01 (vi) Digital Amp meter 0 - 500 Amps with in-built CT's - 01 set (vii)Three phase indicating lamp complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable existing LT panel board and supplying, installing, testing and commissioning of panel board, outdoor cubical type KIOSK factory made (CPRI approved) double door type on front & back side openable with locking arrangement, main panel board fabricated out of CRCA MS sheet 3.15 mm thick, 40 x 40 x 6 mm angle iron and Tee section frame, dust and vermin proof, complete with Aiuminium bus bar 4 Nos, 400 Amps capacity in horizontal position mounted on porcelain insulators, totally enclosed, chamber for protection 3 phase 440 volt with suitable size of PVC insulated copper cable control wiring duly mounted on PCC (1:2:4) foundation/platform of height 450mm with suitable size of bolts, nuts & wahsers. The panel board shall be powder coated with smoke gray synthetic enamel paint over a coat of red oxide zink chrome primer complete including the followings :- INCOMING :- MCCB, 415 volt, 250 Amps, 4 pole, 36 KA - 01 No (incoming) with digital Volt meter 0 - 500 volt-01 Nos ,digital Amp meter 0 - 500 Amps with in-built CT's - 01 set OUTGOING:-(i) MCCB, 415 volt, 100 Amps, 4 pole, 25 KA - 01 (ii) MCCB, 415 volt, 63 Amps, 4 pole, 25 KA - 02 Nos (outgoing) (iii) 4 pole power contactor 63 Amps,415 Volts-01 (iv) timer switch 0-24 hours for automatic opration single phase-01 nos (v) digital Volt meter 0 - 500 volt - 01 (vi) Digital Amp meter 0 - 500 Amps with in-built CT's - 01 set (vii)Three phase indicating lamp complete all as specified and directed by Engineer-in-charge.

M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth wire 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm bore light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc including taking out old un-serviceable earthing, complete all as directed by Engineer-in-charge. Note: (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No. 3 of MES SSR Part-I., (ii) Item includes the cost of GI pipe up to 7.5m GI for protection of earth strip & (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

SANJOLI CONSTRUCTION COMPANY

vinayandsons

M/s R K Enterprises

SPAGE Consultants

Amresh Traders

M/s Prem Associates

Shri Electrical Enterprises

SHRI BHIKSHU ART AND CONSTRUCTION CO

UTTSAV INDIA LTD

AB Constructions