Tender for elevating lintel beam of Godownno. 1 ,Godown no.2 and godown no.3 and elevating plinth of all sides of godown to drain rain water

Amount

Providing and laying in position cement concrete of specified grade excluding the cost centering and shuttering all work below plinth level and up to iv floor level 1:4:8 (1 cement :2 coarse sand :4 graded cum stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost centering and shuttering all work below plinth level and up to iv floor level 1:1.5:3 (1 cement :1.5 coarse sand :3 graded cum stone aggregate 20 mm nominal size)

Fe 500 EQR TMT steel bars RCC works where not included in the complete rate of RCC including bending ,binding and placing in position complete.

Providing fabricating and commissioning of 44 ma several thickness sliding shutter fabricated out of 2 mm thick cold rolled shells using 2 mm thick sheet on both faces with internal spacer supports rolled sheets at maximum 300 mm c/c interval both vertically and horizontally. The sheets to be spot welded over the internal spacer support.The top guide to be rolled from 4 mm thick MS sheets with a clear support at 300 mmc/c, the cleats are to be fixed with the wall or MS support with anchor fastener and counter sunk bolt with guide two suspended support has a minimum of 2 bearings at bottom and as all required to complete at site.

M S CONSTRUCTION